!!!Warning!!! Clone the project instead of making changes to the original design. !!!Warning!!! This is a micro drone made using Arduino Nano and NRF24L01 Battery1 : 3.7V Battery2 : 3.7V Motor : 8520 micro coreless motor Connect NRF24L01 (with adapter module) using jumper wires

This is a controller for micro drone made using Arduino Nano and NRF24L01 module. *Left Joystick* X : Throttle Y : Yaw *Right Joystick* X : Roll Y : Pitch Input Voltage : Greater than 5V Connect NRF24L01 (with adapter module) using jumper wires

ADXL345 iMEMS® Accelerometer, 3 Axis Sensor Evaluation Board The ADXL345 measures acceleration in three axes (X, Y, Z) and outputs digital data via either I²C or SPI interfaces. It is widely used in applications like tilt sensing, vibration monitoring, free-fall detection, and motion-based user interfaces. Its high resolution (up to 13-bit) allows it to detect very small changes in motion, making it suitable for both consumer electronics and industrial applications. Key Features 3-axis acceleration measurement (X, Y, Z) Selectable measurement ranges: ±2g, ±4g, ±8g, ±16g High resolution (13-bit) with up to 4 mg/LSB sensitivity Digital output interfaces: I²C and SPI Low power consumption: ideal for battery-powered devices Built-in motion detection functions: Tap and double-tap detection Free-fall detection Activity and inactivity monitoring Wide bandwidth range: supports various data rates for different applications Operating voltage: typically 2.0V to 3.6V Compact package: small LGA form factor suitable for space-constrained designs Common Applications Smartphones and tablets (screen rotation, motion sensing) Wearable devices and fitness trackers Gaming controllers Robotics and drones Vibration and shock monitoring systems #commonpartslibrary #developmentboard #evaluationboard #sensor

Accelerometer, Gyroscope, 6 Axis Sensor I2C, I3C, SPI Output The BMI323 is a low-power, high-performance inertial measurement unit developed by Bosch Sensortec. It integrates a three-axis accelerometer and a three-axis gyroscope within a compact surface-mount package intended for motion sensing applications requiring precise movement detection, orientation tracking, vibration monitoring, and activity recognition. The device is optimized for wearable electronics, industrial sensing, robotics, navigation systems, IoT devices, and consumer electronics where low power consumption and high motion accuracy are critical. The sensor includes advanced digital signal processing, configurable motion-detection features, programmable interrupts, and integrated FIFO buffering to reduce host processor workload and improve system efficiency. Communication is supported through standard digital interfaces, enabling straightforward integration with microcontrollers and embedded platforms. The BMI323 is designed for robust environmental performance and supports flexible power management modes suitable for battery-operated systems. Engineering Specifications Device Type Six-axis inertial measurement unit consisting of: Three-axis accelerometer Three-axis gyroscope Manufacturer Bosch Sensortec Package Compact LGA surface-mount package suitable for automated assembly processes. Accelerometer Characteristics Supports multiple selectable full-scale measurement ranges for motion and acceleration sensing applications. Provides high-resolution digital output with configurable filtering and sampling parameters for low-noise operation and accurate motion analysis. Gyroscope Characteristics Integrated three-axis angular rate sensor with programmable measurement ranges and digital filtering capabilities. Designed for rotational movement tracking, stabilization, gesture recognition, and inertial navigation applications. Digital Interfaces Supports: I²C serial communication SPI serial communication I3C compatible operation Power Features Designed for ultra-low power operation with multiple configurable power modes to optimize energy consumption for portable and battery-powered devices. Embedded Features Includes integrated: FIFO data buffering Motion detection engine Activity and inactivity detection Tap and gesture detection Orientation and tilt sensing Interrupt generation Self-test functionality Output Data Handling Provides configurable output data rates, oversampling settings, and digital filtering options for balancing performance, bandwidth, and power consumption. Temperature Performance Integrated temperature sensing and compensation support for improved measurement stability across varying environmental conditions. Interrupt System Programmable interrupt outputs support event-driven system architectures and allow efficient host wake-up functionality. Operating Environment Designed for operation across industrial and consumer temperature ranges with stable sensor performance under dynamic motion conditions. Applications Suitable for: Wearable devices Smart watches Fitness trackers Industrial motion monitoring Robotics Drones Navigation systems Gaming controllers AR/VR systems IoT motion sensing Human-machine interfaces #commonpartslibrary #integratedcircuit #accelerometer #sensor

Pressure Sensor 4.35PSI ~ 18.13PSI (30kPa ~ 125kPa) Absolute 10-WFLGA The BMP581 is a high-precision digital barometric pressure sensor designed for altitude tracking, environmental monitoring, navigation, weather sensing, and industrial measurement applications. It integrates a MEMS pressure sensing element with a low-noise analog front end and digital signal processing to deliver highly accurate pressure and temperature measurements over a wide operating range. The device supports low-power operation, making it suitable for portable, battery-powered, and always-on sensing systems. The sensor communicates through standard digital interfaces and includes configurable sampling, filtering, and interrupt features for flexible system integration. Its compact package enables use in space-constrained embedded designs such as wearables, mobile devices, drones, smart home systems, IoT devices, and industrial instrumentation. Engineering Specification Device Type Digital barometric pressure and temperature sensor Manufacturer Bosch Sensortec Pressure Measurement High-resolution absolute pressure measurement with integrated temperature compensation Temperature Measurement Integrated digital temperature sensing for environmental monitoring and pressure compensation Pressure Range Wide atmospheric pressure sensing range suitable for altitude and environmental applications Interface Support I²C and SPI digital communication interfaces Supply Voltage Low-voltage operation optimized for embedded and portable systems Power Consumption Ultra-low power modes with configurable performance and sampling settings Measurement Features Oversampling support with programmable output data rate and internal filtering Accuracy High absolute and relative pressure accuracy for precise altitude estimation and environmental sensing Noise Performance Low-noise sensor architecture for stable pressure readings and improved altitude resolution Interrupt Features Configurable interrupt generation for data-ready and threshold-based events FIFO Support Integrated FIFO buffering for efficient sensor data management Operating Temperature Industrial temperature operating capability for consumer and industrial environments Package Type Compact surface-mount package optimized for small PCB footprint designs Applications Altitude tracking, indoor navigation, weather stations, drones, wearable electronics, IoT sensing, HVAC systems, industrial monitoring, and portable devices #CommonPartsLibrary #Sensor #Transducer #PressureSensor

Pressure Sensor 4.35PSI ~ 18.13PSI (30kPa ~ 125kPa) 9-LGA The BMP585 is a high-precision digital barometric pressure sensor designed for accurate altitude and environmental pressure measurement in compact, low-power embedded systems. It integrates a MEMS sensing element with advanced signal conditioning and digital compensation circuitry to provide highly stable and reliable pressure and temperature data across a wide operating range. The device is optimized for portable electronics, industrial sensing, indoor navigation, weather monitoring, drones, and IoT applications requiring precise atmospheric measurements. The sensor supports digital communication through standard serial interfaces, enabling straightforward integration with modern microcontrollers and processors. Its low noise performance, high resolution, and fast response characteristics make it suitable for applications involving motion tracking, vertical positioning, and environmental monitoring. The compact surface-mount package allows efficient PCB layout integration in space-constrained designs. The BMP585 incorporates configurable sampling, filtering, and power management features to balance measurement accuracy, bandwidth, and energy consumption. Internal calibration and compensation algorithms reduce system-level complexity while improving long-term stability and measurement consistency. The device is designed for robust operation under varying environmental conditions and supports low-power modes for battery-operated systems. Engineering Specification Device Type Digital barometric pressure and temperature sensor Sensor Functions Atmospheric pressure sensing Temperature sensing Altitude estimation support Pressure Measurement High-resolution MEMS pressure sensing element Integrated digital compensation and calibration Low-noise pressure measurement architecture Temperature Measurement Integrated temperature sensing for environmental monitoring and pressure compensation Communication Interface I²C interface support SPI interface support Power Features Low-power operation Configurable performance and sampling modes Sleep and standby operating capability Signal Processing Integrated digital filtering Configurable oversampling Internal compensation engine Package Information Compact surface-mount package RoHS-compliant construction Operating Characteristics High measurement stability Fast response time Designed for portable and industrial environments Application Areas Wearable devices Indoor navigation systems Portable weather stations Industrial monitoring IoT sensing nodes Drones and altitude tracking systems Consumer electronics #commonpartslibrary #integratedcircuit #pressuresensor

Pressure Sensor +/-0.22PSI (+/-1.5kPa) Differential Male - 0.08\" (2.00mm) Tube, Dual 16 b 16-SMD Module, Dual Top Ports The SDP33-1500Pa-TR-250PCS is a digital differential pressure sensor module from Sensirion AG, designed for high-precision measurement of low-pressure differences up to ±1500 Pa (±1.5 kPa). It belongs to the SDP3x series, which uses Sensirion’s CMOSens® technology for compact, accurate, and stable sensing performance. It is widely used in HVAC systems, airflow measurement, medical devices, and industrial control applications where precise air or gas flow monitoring is required. Key Features Differential Pressure Measurement Range: ±1500 Pa (±1.5 kPa) Digital Output Interface I²C communication for easy MCU integration High Resolution 16-bit digital output Accurate & Stable Performance Factory-calibrated and temperature compensated No zero-point drift Low Power Consumption Designed for battery-powered and embedded systems Compact SMD Module Small footprint, surface-mount package (easy PCB integration) Fast Response Time Suitable for real-time airflow and pressure monitoring Wide Operating Conditions Supply voltage: ~3.3V Operating temperature: -40°C to +85°C Reflow Solderable Compatible with standard SMT manufacturing processes Reliable Long-Term Stability Built for high-volume industrial and commercial applications Typical Applications HVAC airflow and filter monitoring Ventilation and air quality systems Medical respiratory devices Industrial automation and process control Drones and airspeed (pitot tube systems) IoT environmental sensing #CommonPartsLibrary #Sensor

- Converter, Battery Powered Devices Voltage Regulator IC 1 Output 30-FC2QFN (4x4) The MAX77960EFV06+ is a fully integrated switching charger and power management IC that supports both step-up (boost) and step-down (buck) operation, making it suitable for USB-C PD applications where input voltage can be higher or lower than the battery voltage. It includes an internal Smart Power Selector™, which intelligently manages power flow between the input source, battery, and system load, enabling smooth system startup even with deeply discharged batteries. This device is widely used in portable electronics, battery-powered systems, drones, cameras, and USB-C PD devices requiring high power efficiency and compact design. Key Features Power & Electrical Specs Input voltage range: 3.5 V to 25.4 V High-efficiency buck-boost operation (up to ~97% peak efficiency) Programmable charging current: 100 mA to 3.15 A (MAX77960 version) Supports 2-cell and 3-cell Li-ion battery charging #CommonPartsLibrary #IntegratedCircuit #PowerManagement