Quad bidirectional transil, Suppressor for ESD protection, 5V Standoff, 4 Channels, SOT-23-6 ESD protection suppression transient SOT?23*

SMAJ5.0A-Q is an automotive-grade, unidirectional Transient Voltage Suppressor (TVS) diode from Bourns. It is designed to protect sensitive electronic circuits from Electrostatic Discharge (ESD), Electrical Fast Transients (EFT), lightning-induced surges, and other transient overvoltage events. The device is commonly used on 5 V power rails and communication interfaces in automotive, industrial, and telecom applications. Key Features Unidirectional TVS diode for DC line protection. 5 V reverse standoff voltage (VRWM) suitable for 5 V systems. 6.4 V minimum breakdown voltage (VBR). 9.2 V maximum clamping voltage (VC) at peak pulse current. 400 W peak pulse power dissipation (10/1000 μs waveform). 43.5 A peak pulse current (IPP) capability. AEC-Q101 qualified for automotive applications. Fast response time (<1 ps typical) for effective transient suppression. Wide operating temperature range: -55°C to +150°C. Surface-mount DO-214AC (SMA) package for compact PCB designs. RoHS compliant and suitable for automated assembly processes. Typical Applications Automotive ECUs and power rails 5 V power supplies Telecom equipment Industrial control systems I/O ports and communication interfaces Consumer electronics requiring surge protection #CommonPartsLibrary #Diode

WA-SMSI SMT Steel Spacer with internal T Round Standoff Threaded M2x0.4 Steel 0.315" (8.00mm) #Hardware #Fastener #Accessories #Board-Spacer #Standoff

Quad bidirectional transil, Suppressor for ESD protection, 5V Standoff, 4 Channels, SOIC-8 ESD protection suppression transient SOIC*3.9x4.9mm*P1.27mm*

Automotive 1.5-V to 5.5-V, 1.5-A, 0.5-µA IQ ideal diode with integrated FET The LM66100-Q1 is a Single-Input, Single-Output (SISO) integrated ideal diode that is well suited for a variety of applications. The device contains a Pchannel MOSFET that can operate over an input voltage range of 1.5 V to 5.5 V and can support a maximum continuous current of 1.5 A. The chip enable works by comparing the CE pin voltage to the input voltage. When the CE pin voltage is higher than VIN, the device disables and the MOSFET is off. When the CE pin voltage is lower, the MOSFET is on. The LM66100-Q1 also comes with reverse polarity protection (RPP) that can protect the device from a miswired input, such as a reversed battery. Two LM66100-Q1 devices can be used in an ORing configuration similar to a dual diode ORing implementation. In this configuration, the devices pass the highest input voltage to the output while blocking reverse current flow into the input supplies. These devices can compare input and output voltages to make sure that reverse current is blocked through an internal voltage comparator. The LM66100-Q1 is available in a standard SC-70 package characterized for operation over a junction temperature range of –40°C to 150°C. 1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: –40°C to 125°C ambient operating temperature range • Wide operating voltage range: 1.5 V–5.5 V • Reverse voltage standoff on VIN: –6-V absolute maximum • Maximum continuous current (IMAX): 1.5 A • On-Resistance (RON): – 5-V VIN = 79 mΩ (typical) – 3.6-V VIN = 91 mΩ (typical) – 1.8-V VIN = 141 mΩ (typical) • Comparator chip enable (CE) • Channel status indication (ST) • Low current consumption: – 3.6-V VIN shutdown current (ISD,VIN): 120 nA (typical) – 3.6-V VIN quiescent current (IQ, VIN): 150 nA (typical)

9.2VC Clamp 21.8A Ipp TVS DIODE SOD-123FL The SMF5.0A is a unidirectional Transient Voltage Suppressor (TVS) diode designed to protect sensitive electronic circuits from electrostatic discharge (ESD), lightning surges, and other transient overvoltage events. It is commonly used on 5V power rails, USB VBUS lines, DC inputs, and general-purpose power protection applications. The device comes in a compact surface-mount SOD-123FL/SMF package suitable for space-constrained PCB designs. Key Features 5V reverse standoff voltage (VRWM) 200W peak pulse power dissipation (10/1000µs waveform) Fast response time for transient suppression Low clamping voltage (~9.2V max) Unidirectional TVS protection Excellent ESD and surge protection capability Compact SOD-123FL / SMF surface-mount package Low leakage current Operating temperature up to +150°C RoHS compliant and halogen-free variants available

The SMBJ6.8CA is a bidirectional Transient Voltage Suppression (TVS) diode designed to protect sensitive electronic circuits from voltage transients caused by electrostatic discharge, lightning-induced surges, inductive load switching, and other transient events. It is commonly used in power supplies, communication interfaces, industrial control systems, automotive electronics, and consumer devices requiring robust overvoltage protection. The device utilizes avalanche breakdown technology to rapidly clamp transient voltages to safe levels, helping prevent damage to downstream components. Its bidirectional configuration makes it suitable for protecting AC lines and signal lines where voltage polarity may reverse. The SMB package provides a compact surface-mount solution with high surge-handling capability and excellent reliability for demanding environments. Features Bidirectional transient voltage suppression diode Fast response time to transient events High peak pulse power dissipation capability Low incremental surge resistance Excellent clamping performance Surface-mount SMB package Protection against ESD and lightning-induced surges Suitable for AC and bidirectional signal line protection RoHS-compliant and halogen-free options available from various manufacturers High reliability and long operational life Electrical Characteristics Reverse standoff voltage optimized for low-voltage applications Avalanche breakdown protection mechanism High peak surge current capability Low leakage current during normal operation Bidirectional voltage clamping characteristics Designed for transient suppression in accordance with industry surge standards Applications Power input protection Communication interfaces Industrial automation equipment Automotive electronic modules Consumer electronics Data and signal line protection Telecom equipment Embedded control systems Sensor interface protection Package Information Package Type: SMB (DO-214AA) Surface-mount technology Compact footprint for PCB integration Suitable for automated assembly processes #commonpartslibrary #semiconductor #tvsdiode #esdprotection #surgeprotection #circuitprotection #transientvoltagesuppressor #powerprotection #electronics #surfaceMountDevice #automotiveelectronics #industrialelectronics

53.3V Clamp 7.5A Ipp Tvs Diode Surface Mount SMA TVS diode SMA 33V The SMAJ33A-13-F is a surface-mount transient voltage suppression (TVS) diode designed to protect sensitive electronic components from voltage spikes and transient events. It is typically used in circuits exposed to electrostatic discharge, inductive load switching, and other transient voltage conditions. The device operates by clamping excessive voltage to a safe level, thereby preventing damage to downstream components. Its compact surface-mount package enables efficient use of board space while maintaining reliable thermal and electrical performance. Device Overview This component is constructed using silicon avalanche technology, providing fast response time to transient events. It is intended for use in high-reliability applications where overvoltage protection is critical. The unidirectional configuration ensures effective suppression in circuits with a defined polarity. The device is optimized for low leakage current under normal operating conditions and high surge capability during transient events. Electrical Characteristics The diode is designed to operate with a defined stand-off voltage, ensuring it remains non-conductive during normal system operation. Upon exceeding the breakdown threshold, the device transitions into conduction, clamping the voltage to a specified level. It supports high peak pulse power dissipation and is capable of handling repeated transient events without significant degradation. Mechanical and Packaging Information The device is provided in a compact surface-mount package suitable for automated assembly processes. The package is designed for efficient heat dissipation and mechanical robustness, supporting standard reflow soldering techniques. Terminal finishes are compatible with common PCB manufacturing processes and ensure reliable solder joints. Applications Suitable for use in consumer electronics, industrial control systems, telecommunications equipment, and automotive electronics where protection against voltage transients is required. Common use cases include power supply lines, data lines, and interface ports. Environmental and Reliability Considerations The component is designed to meet standard environmental and reliability requirements for electronic components. It is suitable for operation across a wide temperature range and is built to withstand typical handling and assembly stresses. #commonpartslibrary #circuitprotection #tvsdiode

23.2VC Clamp 25.9A@10/1000us Ipp TVS DIODE SMB(DO-214AA) The SMBJ14A-HF is a unidirectional Transient Voltage Suppressor (TVS) diode designed to protect sensitive electronic circuits from high-voltage transient events such as ESD (electrostatic discharge), lightning-induced surges, and switching spikes. It is part of the SMBJ series, commonly used for general-purpose surge protection in compact surface-mount designs. It is housed in a DO-214AA (SMB) surface-mount package, making it suitable for automated PCB assembly and space-constrained applications. Key Features Working reverse standoff voltage (VRWM): 14 V Breakdown voltage: ~15.6 V to 17.2 V Clamping voltage: ~23.2 V at peak pulse current Peak pulse power: 600 W (10/1000 µs waveform) Peak pulse current: ~25.9 A Unidirectional TVS diode (single channel) Fast response to transient overvoltage events (nanosecond range) Low leakage current (typically ~1 µA) Operating temperature range: −55 °C to +150 °C Surface-mount DO-214AA (SMB) package RoHS compliant, HF (halogen-free) version (“-HF”) #CommonPartsLibrary #Diode

TVS SMF5.0CA SOD-123FL_L2.8-W1.8-LS3.7-BI LCSC Part Number: C2925491 JLCPCB Part Class: Extended Part Manufactured by Liown(里阳半导体) SMD Transient Voltage Suppressor (TVs) Diodes, SMF Series Case SMF/SOD-123FL, 2 Pads, Bidirectional Type, Stand-off Voltage 5.0V Peak Pulse Power: 200 Watts, Peak Pulse Current: 21.7A Max. Operating Junction Temp. Range -55°C ~+150°C Package in Tape/Reel, 3000pcs/Reel RoHS/RoHS III compliant, RoHS Annex III lead Exemption (Exempt per RoHS EU 2015/863) and Halogen Free (HF)

8A@8/20us 54V 26.7V 24V SOT-23 ESD and Surge Protection ESD DIODE 24VWM 41VC SOT-23 PESD2CAN is a dual-line ESD protection diode designed to protect automotive Controller Area Network (CAN) bus interfaces from Electrostatic Discharge (ESD), surge events, and other transient voltage disturbances. It is housed in a compact SOT-23 package and provides protection for both CANH and CANL lines using a single device. Key Features Dual CAN bus line protection in a single SOT-23 package Maximum peak pulse power: 230 W (8/20 μs surge waveform) Low clamping voltage: 41 V at 5 A surge current Ultra-low leakage current: < 1 nA ESD protection up to 30 kV Compliant with IEC 61000-4-2 Level 4 ESD standard Compliant with IEC 61000-4-5 surge immunity standard AEC-Q101 qualified for automotive applications Reverse standoff voltage: 24 V Low capacitance (typically 25 pF) to minimize impact on CAN signal integrity Suitable for both high-speed and fault-tolerant CAN networks Typical Applications Automotive CAN bus networks Industrial CAN communication systems Automotive electronic control units (ECUs) CAN transceivers requiring ESD and surge protection Any differential communication interface exposed to external connectors Package SOT-23 (3-pin) Surface-Mount Device (SMD) package. #CommonPartsLibrary #Diode

3.3A 20V 70W 6V Unidirectional 5V DFN1006-2 ESD and Surge Protection (TVS/ESD) ROHS ESD5341N is a single-line, unidirectional Transient Voltage Suppressor (TVS) diode designed to protect high-speed data and signal lines from Electrostatic Discharge (ESD), Electrical Fast Transients (EFT), and surge events. Its ultra-low capacitance makes it suitable for protecting sensitive interfaces without degrading signal integrity. Key Features Working (stand-off) voltage: 5 V ESD protection: Up to ±20 kV contact discharge per IEC 61000-4-2 Surge capability: Up to 4 A (8/20 μs) per IEC 61000-4-5 Ultra-low capacitance: Typically 1.0 pF, minimizing signal distortion Ultra-low leakage current: Typically <1 nA Low clamping voltage for effective transient suppression Unidirectional protection for a single signal line Compact DFN1006-2L package Pb-free and Halogen-free compliant versions available Typical Applications USB interfaces HDMI interfaces DVI ports Portable electronics Notebooks and handheld devices Other high-speed data lines requiring ESD protection #CommonPartsLibrary #Diode

10A@8/20us 10V 4V 3.3V SOD-523 ESD and Surge Protection (TVS/ESD) ROHS PESD3V3S1BA-N SOD-523_L1.2-W0.8-LS1.6-BI LCSC Part Number: C3036285 JLCPCB Part Class: Extended Part Manufactured by BORN(伯恩半导体) BORN PESD3V3S1BA-N bidirectional ESD protection TVS diode, designed for transient voltage and electrostatic discharge protection of sensitive signal lines, 3.3V reverse stand-off voltage, 4.0V reverse breakdown voltage, 10V clamping voltage, 500µA max reverse leakage current, 13pF typical junction capacitance, 100W peak pulse power, IEC 61000-4-2 ESD protection up to 25kV air discharge and 25kV contact discharge, -55°C to +150°C operating temperature, SOD-523 surface-mount package. Search Keywords: PESD3V3S1BA-N, BORN PESD3V3S1BA-N, PESD3V3S1BA, 3.3V ESD diode, bidirectional ESD protection diode, TVS diode SOD-523, ESD protection SOD-523, low capacitance TVS diode, signal line ESD protection, IEC6100042 ESD diode, 25kV ESD protection diode, BORN TVS diode Hashtags: #PESD3V3S1BAN #PESD3V3S1BA #BORNDiode #BORNESDProtection #ESDProtectionDiode #TVSDiode #BidirectionalTVS #3V3TVS #SignalLineProtection #SOD523 #IEC6100042 #25kVESDProtection #LowCapacitanceTVS

TVS Diode Array, 5.5V Standoff, 3 Channels, SOT-143 package usb esd protection suppression transient SOT?143*

TVS Diode Array, 5.5V Standoff, 4 Channels, SOT-23-5 package usb esd protection suppression transient SOT?23*