M2302 DHT22 Temperature and Humidity Sensor for Arduino and Raspberry Pi #commonpartslibrary #dht22 #am2302

The OEM pressure sensors in the AMS 5812 series are high-precision sensors with two different outputs, an analog output and a digital I2C output. The analog 0.5 to 4.5V output is ratiometric to the supply voltage and provides pressure measurement data only, while the I2C output provides pressure as well as temperature measurement data. Both outputs can be used simultaneously. Datasheet Pressure Sensor AMS5812: https://www.analog-micro.com/products/pressure-sensors/board-mount-pressure-sensors/ams5812/

The Grove - CO2 & Temperature & Humidity Sensor (SCD30) is a high precision carbon dioxide sensor, which is based on Sensirion SCD30. The measuring range of this sensor is 0 ppm-40'000 ppm, and the measurement accuracy can reach to ±(30 ppm + 3%) between 400ppm to 10'000ppm.

Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g #MPU6050 #IoT #DFRobot #module

This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high side voltage and DC current draw over I2C with 1% precision. #Sublayout #CurrentSensor

Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface with most controllers. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. The device also provides 12-bit temperature measurements in degrees Celsius. #Sublayout #Submodule #Altitude #PressureSensor #MPL3115A2

This project is a LoRa temperature sensor module. It uses the RP2040 microcontroller and a SHT31 temperature sensor and also RFM95 for LoRa communication #LoRa #module #reusable #simple-embedded #raspberrypi #sublayout

This is a Bluetooth Low-Energy (BLE) temperature sensor module. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #module #BLE #ESP32 #reusable #module #simple-embedded #espressif #sublayout

This project is a BLE door and window sensor design that uses a U-blox BMD-330-A-R for BLE communication, a reed switch as a sensor, a multi-color LED for status display, and is powered by VBAT. There's also a programming interface and reset switch included. #WiFi #BLE #MCU #ReferenceDesign #Module #reusable #module #simple-embedded #ublox #sublayout

This is a LoRa-based door and window sensor incorporating a microcontroller unit (MCU). It features a reed sensor, LED indicators, a AAA non-rechargeable battery, and a booster IC for constant voltage. The MCU is linked to peripherals through nets, ensuring optimal performance #LoRa #MCU #ReferenceDesign #Module #reusable #module #simple-embedded #seeed #seeed-studio #sublayout

Custom Ambient Light Sensor Module with LGA Footprint

This project is a WiFi-enabled door and window sensor using the ESP8684-WROOM-02C module from Espressif Systems. It includes a triple-color LED indicator, Reed switch for detection, a 3.3V Regulatory mechanism, and USB C for firmware flashing. It's powered by a regular non-rechargeable AAA battery. #WiFi #MCU #ReferenceDesign #module #ESP8684 #reusable #module #simple-embedded #espressif #sublayout

Now mounted on a breakout board, the MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10µA at one measurement per second. #Sublayout #BarometricPressureSensor #module

RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and Gesture Sensor you will be able to control a computer, microcontroller, robot, and more with a simple swipe of your hand! This is, in fact, the same sensor that the Samsung Galaxy S5 uses and is probably one of the best gesture sensors on the market for the price. #Sublayout #Submodule #Sensor #RGB

This project is a LoRa-based leak sensor reference design. It incorporates an STM32 MCU and a RFM95W LoRa module #LoRa #module #reusable #simple-embedded #stm32 #sublayout

The Grove - CO2 & Temperature & Humidity Sensor (SCD30) is a high precision carbon dioxide sensor, which is based on Sensirion SCD30. The measuring range of this sensor is 0 ppm-40'000 ppm, and the measurement accuracy can reach to ±(30 ppm + 3%) between 400ppm to 10'000ppm.

Arduino Uno Shield for Blue Light Optical Sensor. The circuit generates a 2.1kHz sinusoidal signal to send to LEDs and contains a filtering and amplification circuit to preprocess the signal. Powered by 24V and regulated down to 12V and 5V to power Arduino. #ArduinoUno

Temperature Sensor Module for DHT11 or DH22 #Module

A cheap, yet precise filament diameter sensor, intended to compensate for filament diameter deviations in real-time. The InFiDEL is a cheap (< $5) filament diameter sensor intended for use with FDM 3d printers. The sensor can be calibrated to provide surprisingly precise filament diameter readings in real-time. The main idea is to use the sensor to correct for filament diameter deviations while printing.