Isolated Module DC DC Converter 2 Output 15V -15V 170mA, 170mA 4.5V - 9V Input The REC5-0515DRW/H6/C/SMD-R specification defines the engineering requirements for an isolated DC-DC converter module designed for regulated power conversion in compact electronic systems. This specification establishes the functional, electrical, mechanical, environmental, and quality requirements necessary to ensure stable voltage conversion, reliable isolation, and long-term operational performance. The device is intended for use in embedded systems, industrial control equipment, communication modules, and distributed power architectures where isolated power rails are required. It provides regulated output power from a DC input source while maintaining galvanic isolation between input and output stages to enhance system safety and signal integrity. Engineering Requirements The power module shall be manufactured using controlled electronic assembly processes and high-reliability components to ensure stable conversion efficiency and consistent output regulation. The internal architecture shall support isolated power transfer with stable performance under defined load and environmental conditions. Electrical characteristics shall ensure stable output regulation, low output ripple, and reliable transient response during load variation. The device shall maintain consistent performance across its intended operating temperature range and input voltage variation conditions. Isolation performance shall ensure electrical separation between input and output circuits to protect downstream electronics and maintain system safety requirements. The module shall withstand electrical stress conditions defined by applicable safety and reliability standards. Thermal performance shall support continuous operation without degradation of output regulation or reliability under rated operating conditions. The device shall be suitable for PCB mounting and shall maintain structural integrity during soldering and long-term operation. Workmanship shall be free from defects such as contamination, cracks, soldering defects, or structural irregularities that could affect electrical performance or mechanical reliability. Manufacturing and inspection shall be performed using controlled processes and calibrated equipment. Any deviation from this specification shall require formal engineering review, documented justification, and approval through established engineering change control procedures. Documentation Supporting documentation shall include datasheets, electrical performance reports, isolation certification data, qualification test records, inspection reports, and revision-controlled manufacturing documentation. All documentation shall be maintained under formal configuration management and quality assurance systems. Revision Control All changes to this specification shall be managed through the formal engineering change control system. Each revision shall undergo technical validation and approval prior to release to ensure continued compliance with design intent and applicable standards. #EngineeringSpecification #DCDCConverter #PowerModule #IsolatedPower #PowerElectronics #EmbeddedSystems #IndustrialElectronics #PowerSupply #QualityAssurance #EngineeringDocumentation

Metallic Case - 1 500 VDC Isolation, Hi-Rel DC-DC Converter The MGDS-04-J-C/M/S is a high-reliability 4 W isolated DC-DC converter module designed for demanding industrial, transportation, military, and aerospace applications. It belongs to the MGDS-04 series and features a 16–40 VDC input range (J input code), a regulated 5 VDC single output (C output code), and galvanic isolation between the input and output. The /S suffix indicates that the module undergoes screening and serialization for enhanced reliability and traceability, making it suitable for mission-critical systems. Key Features 4 W isolated DC-DC converter Wide 16–40 VDC input voltage range Regulated 5 VDC single output High-efficiency power conversion Input-to-output galvanic isolation Designed for industrial, defense, aerospace, and transportation applications Built-in protection features (including short-circuit protection) Compact encapsulated module for PCB mounting /S option provides screening and serialization for improved quality assurance and traceability #DCDCConverter #PowerModule #IsolatedPower #IndustrialElectronics #Aerospace #MilitaryElectronics #EmbeddedSystems #PowerSupply #HighReliability #PCBDesign

The B0505S-1WR3 is a compact isolated DC-DC power converter module designed to provide regulated power conversion while maintaining galvanic isolation between input and output circuits. The module incorporates high-frequency switching technology and transformer isolation to deliver stable power with reduced noise coupling and improved system safety. It is widely used in industrial control systems, communication equipment, instrumentation, data acquisition devices, medical electronics, and embedded applications where isolated power rails are required to eliminate ground loops and enhance signal integrity. Engineering Specification Device Type Isolated DC-DC Converter Module Power Conversion Topology Transformer-Isolated Switching Regulator Input Configuration Single DC Input Output Configuration Single Isolated DC Output Isolation Method Internal High-Frequency Transformer Isolation Regulation Characteristics Regulated Output Voltage High Conversion Efficiency Low Output Ripple and Noise Electrical Features Galvanic Isolation Between Input and Output Enhanced Noise Immunity Stable Load Regulation Reliable Power Transfer Performance Protection Characteristics Short-Circuit Resistant Design Input-to-Output Isolation Protection Thermal Reliability Enhancement Package Style Single In-Line Through-Hole Package Mounting Type Through-Hole Mounting Environmental Characteristics Industrial-Grade Reliability Long Operational Lifetime High Resistance to Electrical Interference Suitable for Harsh Operating Environments Applications Industrial Automation Equipment Data Acquisition Systems Sensor Signal Conditioning Communication Interfaces Medical Electronics Embedded Control Systems Power Supply Isolation Instrumentation Equipment Process Control Devices Microcontroller-Based Systems Features Compact Integrated Module Isolated Power Distribution High Reliability Design Low Electromagnetic Interference Simple Circuit Integration Efficient Power Conversion Stable Output Performance Wide Application Compatibility RoHS Compliant Construction Manufacturer MORNSUN #commonpartslibrary #powermodule #dcdcconverter #isolatedpower #galvanicisolation #powermanagement #powersupply #powerelectronics #industrialelectronics #instrumentation #communications #embeddedsystems #medicalelectronics #throughhole #electroniccomponents

DC-DC modular power supply, fixed voltage input, isolated non-regulated single-channel output The B0505S-1W is an isolated DC-to-DC converter module designed to provide regulated power conversion with galvanic isolation between input and output stages. This compact power module is commonly used in industrial control systems, embedded electronics, communication equipment, instrumentation, and distributed power architectures where electrical isolation and stable voltage conversion are required. The device converts a nominal DC input voltage to an isolated DC output voltage while maintaining low power consumption and reliable operation. Its fully encapsulated construction enhances thermal performance, electrical insulation, and environmental durability. The B0505S-1W is widely used for noise isolation, ground loop elimination, signal conditioning support, and isolated power distribution in sensitive electronic systems. Engineering Specification Device Type Isolated DC-to-DC power converter module Conversion Topology Fixed-input isolated regulated power conversion Isolation Feature Galvanic isolation between input and output Input Characteristics Designed for nominal low-voltage DC input operation Output Characteristics Regulated isolated DC voltage output Output Power Low-power isolated converter suitable for embedded systems Efficiency Characteristics Optimized power conversion efficiency for compact electronic applications Package Type Encapsulated SIP through-hole module Mounting Style Through-hole mounting Protection Features Isolation protection and stable power conversion characteristics Thermal Characteristics Low thermal dissipation with compact module structure Reliability Features Industrial-grade encapsulated construction for long-term operation Applications Industrial automation Embedded systems Communication equipment Sensor isolation Signal conditioning Data acquisition systems Medical electronics Power distribution networks Ground loop isolation Instrumentation systems Manufacturer Commonly manufactured by Mornsun and compatible power module vendors #commonpartslibrary #dcdcconverter #isolatedconverter #powermodule #powerelectronics #isolatedpower #embeddedhardware #industrialelectronics #powersupply #signalisolation #throughholecomponents #electronicsdesign #powerconversion #galvanicisolation

Isolated Module DC DC Converter 1 Output 9V 111mA 10.8V - 13.2V Input The RO-1209S is a compact, isolated 1W DC-DC converter module from the ECONOLINE RO series, designed to convert a nominal 12V DC input into a regulated 9V DC isolated output. Housed in a SIP-4 through-hole package, it provides galvanic isolation of up to 1kVDC between input and output, making it suitable for industrial, instrumentation, telecommunications, and general-purpose power isolation applications. The module features a wide operating temperature range and fully encapsulated construction for enhanced reliability. Key Features 1W isolated DC-DC converter Nominal 12V DC input voltage Single 9V DC output 1kVDC input-to-output isolation Compact SIP-4 through-hole package Fully encapsulated design for improved reliability Industrial operating temperature range: -40°C to +85°C Up to 80–85% efficiency Industry-standard pinout Suitable for power isolation and voltage conversion applications UL94V-0 package material Optional short-circuit protection variants available #RO1209S #DCDCConverter #IsolatedPowerSupply #PowerModule #RecomPower #DCDC #PowerElectronics #IndustrialElectronics #VoltageConverter #SIP4

Isolated Module DC DC Converter 1 Output 5.1V 6A 9V - 36V Input The TEN 30WIN series is a family of high performance 30W DC/DC converter modules featuring ultra wide 4:1 input voltage ranges in a compact low profile case with industry-standard footprint. Standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout, over temperature and short circuit protection. Typical applications for these products are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. • 2“ x 1“ x 0.4“ shielded metal package • Ultra wide 4:1 input voltage range • Single- dual- and triple output models • Very high efficiency up to 91 % • Operating temperature range –40 °C to +75 °C • Over temperature protection • I/O isolation 1600 VDC • Remote On/Off • Adjustable output voltage #TRACOPower #TEN302411WIN #DCDCConverter #IsolatedPowerSupply #PowerModule #IndustrialElectronics #EmbeddedSystems #TelecomPower #BatteryPoweredDevices #PowerManagement #ElectronicsDesign #PCBDesign #DCDCModule #WideInputRange #IndustrialAutomation

Isolated Module DC DC Converter 1 Output 12V 2.5A 9V - 36V Input The TEN 30WIN series is a family of high performance 30W DC/DC converter modules featuring ultra wide 4:1 input voltage ranges in a compact low profile case with industry-standard footprint. Standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout, over temperature and short circuit protection. Typical applications for these products are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. • 2“ x 1“ x 0.4“ shielded metal package • Ultra wide 4:1 input voltage range • Single- dual- and triple output models • Very high efficiency up to 91 % • Operating temperature range –40 °C to +75 °C • Over temperature protection • I/O isolation 1600 VDC • Remote On/Off • Adjustable output voltage #TRACOPower #TEN302412WIN #DCDCConverter #IsolatedPowerSupply #PowerModule #IndustrialElectronics #EmbeddedSystems #TelecomPower #BatteryPoweredDevices #PowerManagement #ElectronicsDesign #PCBDesign #DCDCModule #WideInputRange #IndustrialAutomation

Coilcraft NA5889-AL is a high-frequency isolated flyback transformer designed specifically for Texas Instruments TPS55340 Boost/SEPIC/Flyback DC-DC converter applications. Optimized for operation around 200 kHz with input voltages from 2.9 V to 32 V, it provides galvanic isolation of up to 1500 Vrms between primary and secondary windings. The transformer features ferrite core construction, low primary DCR, tightly controlled turns ratio, and compact surface-mount packaging. It is intended for isolated power supply designs requiring efficient energy transfer, compact size, and reliable operation in industrial, embedded, communication, instrumentation, and power conversion applications. Typical output configuration supports isolated 12 V at 1 A when used in the reference TPS55340 flyback design. Search Keywords: NA5889-AL, Coilcraft flyback transformer, TPS55340 transformer, isolated DC-DC transformer, flyback converter transformer, SMPS transformer, power transformer SMD, 1500Vrms isolation transformer, Coilcraft NA5889, flyback magnetics, isolated power supply transformer, ferrite transformer, switch mode power supply transformer, DC DC converter magnetics, TPS55340 flyback design Hashtags: #NA5889AL #Coilcraft #FlybackTransformer #Transformer #SMPS #DCDCConverter #TPS55340 #PowerElectronics #IsolatedPowerSupply #Magnetics #FerriteCore #EmbeddedPower #IndustrialElectronics #PowerSupplyDesign #SwitchingPowerSupply #ElectronicsDesign #PowerConversion #SMDTransformer #ElectronicComponents #HardwareDesign

Recom REM30-W 30W Isolated DC-DC Converter Through Hole, Voltage in 9 36 V dc, Voltage out 5V dc Medical Isolated Module DC DC Converter 1 Output 5V 6A 9V - 36V Input REM30-2405SW is a 30W isolated DC-DC converter from RECOM's REM30-W medical-grade series. It converts a 9V to 36V DC input into a regulated 5V DC output with up to 6A of output current. Designed for medical, industrial, and embedded applications, it features 5kVAC reinforced isolation, high efficiency, and comprehensive protection functions, making it suitable for powering sensitive electronic systems in demanding environments. Key Features 30W isolated DC-DC converter Wide 9V to 36V DC (4:1) input voltage range Regulated 5V DC output at up to 6A 5kVAC reinforced isolation for enhanced safety High efficiency of up to 88% Medical-grade design with low leakage current Built-in overcurrent (OCP), overvoltage (OVP), overtemperature (OTP), short-circuit (SCP), and undervoltage lockout (UVLO) protection Through-hole 2" × 1" DIP module package Wide operating temperature range of -40°C to +105°C (with derating) Suitable for medical equipment, industrial automation, instrumentation, telecommunications, and embedded power systems. #REM30_2405SW #RECOM #DCDCConverter #IsolatedPowerModule #MedicalPower #PowerSupply #IndustrialElectronics #EmbeddedSystems #ThroughHole #Electronics

Recom 2W Isolated DC-DC Converter, Vin 21.6 26.4 V dc, Vout 15 V dc, -9 V dc RECOM RxxP2xxyyD Series is a 2W isolated DC/DC converter designed specifically for SiC MOSFET and IGBT gate driver applications requiring asymmetric output voltages. The converter provides galvanically isolated dual outputs such as ±20V/-5V or +15V/-3V from a single DC input source. It features reinforced isolation up to 6.4kVDC, very low isolation capacitance (10pF max), high common-mode transient immunity (CMTI) of 65kV/µs, and a transformer with physically separated windings for improved noise immunity. The SIP7 package enables compact PCB integration in industrial power electronics, motor drives, renewable energy systems, EV charging, inverters, and high-voltage switching applications. The device is IEC/EN/UL62368-1 certified and optimized for reliable isolated gate driver power supplies. Search Keywords: RECOM RxxP2xxyyD, isolated DC-DC converter, SIP7 DC-DC converter, gate driver power supply, SiC gate driver converter, IGBT gate driver converter, isolated power module, ±15V isolated supply, ±20V isolated supply, high isolation DC-DC converter, 6.4kV isolation converter, low capacitance converter, CMTI 65kV/us converter, industrial DC-DC module, power electronics converter, motor drive power supply, inverter power supply Hashtags: #RECOM #RxxP2xxyyD #DCDCConverter #IsolatedPowerSupply #GateDriver #SiC #SiCMOSFET #IGBT #PowerElectronics #IndustrialElectronics #MotorDrive #InverterDesign #EVCharging #HighVoltage #GalvanicIsolation #SIP7 #EmbeddedPower #ElectronicComponents #PCBDesign #PowerSupplyModule