- ESP32-WROOM-32UE Transceiver; 802.11 b/g/n (Wi-Fi, WiFi, WLAN), Bluetooth® Smart Ready 4.x Dual Mode 2.4GHz Evaluation Board The ESP32-DEVKITC-32UE is a development board based on the ESP32 series SoC designed by Espressif. It is widely used for IoT, embedded systems, and wireless communication applications due to its built-in Wi-Fi and Bluetooth capabilities. Microcontroller: ESP32 dual-core Tensilica LX6 processor Wireless Connectivity: Wi-Fi (802.11 b/g/n) and Bluetooth (Classic + BLE) Flash Memory: Integrated SPI flash (varies by module version) Development Interface: USB-to-UART bridge for easy programming and debugging Power Supply: Typically powered via USB or external 5V input GPIO Pins: Multiple multifunction GPIOs supporting ADC, DAC, PWM, SPI, I2C, UART, etc. Supports deep sleep and ultra-low power modes Multiple peripheral interfaces (SPI, I2C, UART, SDMMC, PWM) Compatible with ESP-IDF, Arduino IDE, and MicroPython Built-in antenna (UE variant uses U.FL or external antenna option depending on module design) IoT devices and smart home systems Wireless sensor networks Data logging and monitoring systems Robotics and automation Embedded control systems #commonpartslibrary #developmentboard #esp32 #wroom

Cellular EDGE, GPRS, GSM, HSPA+, LTE, UMTS Transceiver Module 900MHz, 1.8GHz Antenna Not Included Surface Mount The SIM7600E-H is a multi-mode LTE module that supports: LTE (4G) Cat-4 with up to 150 Mbps download / 50 Mbps upload 3G (UMTS/HSPA+) 2G (GSM/GPRS/EDGE) fallback for global network compatibility It is built in a compact SMT/LCC package (about 30 × 30 mm) and is widely used for embedded devices that need mobile internet and GNSS positioning Key Features Network support LTE-FDD / LTE-TDD (global bands depending on variant) UMTS/HSPA+ GSM/GPRS/EDGE fallback Data speed LTE Cat-4: up to 150 Mbps downlink 3G/2G fallback for lower-speed connectivity GNSS built-in GPS / GLONASS / other satellite positioning support Interfaces USB 2.0 UART GPIO I2C ADC PCM (audio support) SIM card interface Software / protocols AT command control TCP/IP, UDP, HTTP, HTTPS, FTP, DNS Driver support for Windows, Linux, Android Power supply ~3.4V to 4.2V typical operating range Operating temperature -40°C to +85°C (industrial grade) Typical Applications IoT devices GPS trackers Smart metering Industrial routers / gateways Remote monitoring systems Vehicle telematics Point-of-sale terminals #commonpartslibrary #rf #wireless #transceiver #module

WiFi 802.11b/g/n Transceiver Module 2.4GHz ~ 2.5GHz Integrated, Trace Surface Mount The ESP-12F is a compact WiFi module based on the ESP8266EX, widely used in IoT and embedded systems due to its low cost and built-in networking capabilities. Integrated WiFi (2.4 GHz) Supports 802.11 b/g/n Built-in TCP/IP stack (no external WiFi processor needed) Microcontroller + WiFi in one Powered by the ESP8266EX SoC Can run user applications directly (not just a WiFi modem) Flash Memory Typically 4 MB SPI flash (varies by version) GPIO Support Multiple multifunction pins: Digital I/O PWM I2C SPI UART ADC (1 channel) Size: ~16 mm × 24 mm Mounting: Castellated SMD module Antenna: Built-in PCB trace antenna (requires proper keepout zone) Power Requirements Operating Voltage: 3.0V – 3.6V (typical 3.3V) Current Consumption: Idle: ~70 mA Peak (TX): up to ~300 mA Common Interfaces UART – programming and debugging SPI – peripheral communication I2C (software-based) GPIO – general-purpose control #commonpartslibrary #transceiver #module #wireless #rf #wifi

The Wio-E5-LE mini Dev Board integrates and provides access to the full GPIO capabilities of the Wio-E5-LE Wireless Module (STM32WLE5JC). With support for long range protocols and global frequencies, the Wio-E5-LE mini can achieve a transmission range up to 10km in open areas. It supports EU868 and US915, making it well-suited for wireless sensor networks and other IoT devices requiring battery power, low power consumption, and long range connectivity.

USB Hub Controller USB 3.0 USB, GPIO, I²C, SMBus Interface 64-VQFN (9x9) #commonpartslibrary #USB

802.15.4, Bluetooth, WiFi Bluetooth v5.0, Zigbee Transceiver Module 2.4GHz PCB Trace Surface Mount The ESP32-C6-WROOM-1-N8 integrates a 32-bit RISC-V single-core processor running up to 160 MHz, along with 8 MB of embedded SPI flash memory. It supports multiple wireless communication protocols, including: Wi-Fi 6 (802.11ax) in the 2.4 GHz band for improved efficiency and lower latency Bluetooth Low Energy (BLE 5) for short-range communication IEEE 802.15.4 for protocols such as Thread and Zigbee The module features a built-in PCB antenna, RF circuitry, crystal oscillator, and passive components, making it a complete solution that simplifies hardware design. It provides a wide range of GPIO pins and peripheral interfaces such as UART, SPI, I2C, PWM, ADC, and more, enabling flexible integration with sensors and external devices. Designed for low power consumption, it includes multiple power-saving modes, making it suitable for battery-powered applications. Typical Applications Smart home and IoT devices Wireless sensors and control systems Industrial automation Smart lighting and energy management Matter-compatible devices (via Thread support)

USB Hub Controller USB 3.0 USB, GPIO, I2C, SMBus Interface 64-VQFN (9x9) #commonpartslibrary #integratedcircuit #usbhubcontroller

Video Switch IC GPIO, I2C HDMI 1.3a 64-TQFP (10x10) Package #commonpartslibrary #integratedcircuit #videoswitch

IC RF TxRx Only Bluetooth, WiFi Bluetooth v5.0, Thread, Zigbee® 2.412GHz ~ 2.484GHz 32-VFQFN Exposed Pad The ESP32-C6FH4 is a low-power, highly integrated wireless microcontroller from Espressif Systems, designed for IoT applications. It is based on a 32-bit RISC-V processor running at up to 160 MHz, providing efficient performance for embedded systems while maintaining low power consumption. This variant includes 4 MB of embedded flash memory, making it suitable for standalone applications without the need for external flash. The ESP32-C6FH4 supports multiple wireless communication protocols, including: Wi-Fi 6 (802.11ax) in the 2.4 GHz band (backward compatible with Wi-Fi 4/802.11 b/g/n) Bluetooth Low Energy (BLE 5) IEEE 802.15.4 (used for protocols like Thread and Zigbee) Key features include: Rich set of GPIO pins with support for peripherals such as UART, SPI, I2C, PWM, ADC, and more Integrated hardware security features (secure boot, flash encryption, cryptographic accelerators) Multiple low-power modes for battery-operated devices On-chip temperature sensor and RTC peripherals #commonpartslibrary #transceiver

Connector Header Through Hole 40 position 0.100" (2.54mm) Raspberry Pi 40 pin header The TSW-120-07-G-D is a through-hole, double-row vertical header manufactured by Samtec. It features 40 total positions (2 rows of 20 pins) with a standard 2.54 mm pitch. This connector is widely used for board-to-board connections, prototyping, and general-purpose signal routing in embedded and electronic systems. It is designed for reliable mechanical and electrical performance with gold-plated contacts for enhanced conductivity and corrosion resistance. Manufacturer Samtec Inc. Manufacturer Part Number TSW-120-07-G-D Product Type Through-Hole Pin Header Number of Positions 40 (2 × 20) Number of Rows 2 Pitch 2.54 mm (0.100") Row Spacing 2.54 mm (0.100") Mounting Type Through Hole Orientation Vertical Contact Material Phosphor Bronze Contact Plating Gold (Au) over Nickel Plating Thickness Typically 10 µin (0.25 µm) Gold Insulator Material Black Liquid Crystal Polymer (LCP) Current Rating Typically 3.0 A per contact (depending on application conditions) Voltage Rating Typically 250 VAC Operating Temperature Range -55°C to +125°C Termination Type Solder Contact Style Square Post Post Length Standard Samtec “-07” tail length (approx. 2.92 mm tail, varies slightly per datasheet) Applications Embedded systems (e.g., Raspberry Pi GPIO headers) Development boards and expansion modules Board-to-board interconnects Prototyping and test setups Compliance RoHS Compliant Lead-Free Notes Compatible with standard 2.54 mm female headers and sockets Commonly used in stacking or mezzanine configurations Available in various plating options and pin lengths under the TSW series #commonpartslibrary #connector

USB Hub Controller USB 2.0, USB 3.1 GPIO, I²C, I²S, SPI, SMBus, USB Interface 100-VQFN (12x12) #CommonPartsLibrary #IntegratedCircuit #Interface #controller

Module; 2G/2.5G; Analog Audio, UART, USB, SIM, PCM, RTC, ADC, I2C, SPI, GPIO; GPS; BT3.0 (optional); 3.4-4.4V #Module #SIM808 #Integrated-Circuit

Interface - I/O Expanders 16-BIT I2C FM TP GPIO INT PU I/O Expander 16 I2C, SMBus 400 kHz 24-SO #CommonPartsLibrary #IntegratedCircuit #Interface #I/O Expander #PCA9555

USB Hub Controller USB 2.0, USB 3.1 GPIO, I2C, I2S, SPI, SMBus, USB Interface 100-VQFN (12x12) #CommonPartsLibrary #IntegratedCircuit #Interface #Controller

USB Hub Controller USB 3.0 USB, GPIO, I2C, SMBus Interface 48-HTQFP (7x7) #commonpartslibrary #integratedcircuit #hub #controller

ARM Cortex-M0+ MCU, 8KB flash, 2KB RAM, 32MHz, 1.65-3.6V, 16 GPIO, UFQFPN-20 #Microcontrollers #stm32 #commonpartslibrary

USB Hub Controller USB 3.0 USB, GPIO, I²C, SMBus Interface 48-HTQFP (7x7) #CommonPartsLibrary #IntegratedCircuit #Interface #Controller #TUSB8020

I2C Isolator with Bidirectional Clock and Data and two 2/0 Auxiliary GPIOs, SOIC-16 i2c isolator additional gpio SOIC*7.5x10.3mm*P1.27mm*

Wio-E5 mini Dev Board builds in and leads out full GPIO of the Wio-E5 STM32WLE5JC LoRa module. Supporting Long Range protocol and global frequency, the Wio-E5 mini is able to achieve a transmission range of up to 10 km in open areas. It supports EU868 and US915, making it suitable for wireless sensor networks and other IoT devices that require battery power, low power consumption and long range.

I2C Port Expander with 8 Push-Pull and 8 Open-Drain I/Os, QSOP-24 Expander I2C Parallel Port GPIO Maxim QSOP*3.9x8.7*P0.635mm*