Fuseholder horizontal open, 5x20mm, 500V, 16A

Fuse Holder 30A 1 Circuit Blade Through Hole #CommonPartsLibrary #Fuse-Holder #Circuit-Protection fuse holder 5x20 pcb through hole

Fuse Block 10 A 600V 1 Circuit Cartridge Through Hole #CommonPartsLibrary #CircuitProtection #Fuse #FuseHolder

Fuse Holder 15A 32V 1 Circuit Blade Through Hole #CommonPartsLibrary #Circuit-Protection #Fuse-Holder #153

Fuse Holder 80V 1 Circuit Blade Through Hole General Description The 178.7017.0001 is a PCB-mounted fuse holder designed for cartridge fuses, typically used in power input protection circuits. It provides a secure and reliable method for mounting and replacing fuses in electronic assemblies. This component is commonly used in industrial equipment, power supplies, and consumer electronics where overcurrent protection is required. Key Features Designed for standard cartridge fuses (commonly 5x20 mm format) Through-hole PCB mounting for secure mechanical stability Reliable electrical contact with low resistance Easy fuse replacement and maintenance High-temperature resistant housing material Suitable for mains and low-voltage applications Mechanical Characteristics Mounting Type: Through-Hole (THT) Fuse Size Compatibility: 5 mm x 20 mm Orientation: Vertical PCB mount Housing Material: Thermoplastic (UL94 V-0 rated) Pin Configuration: 2-pin Electrical Characteristics Rated Current: Up to 10 A (depending on fuse used) Rated Voltage: Up to 250 VAC Contact Resistance: Low contact resistance for efficient conduction Insulation Resistance: High insulation resistance Environmental Characteristics Operating Temperature Range: -40°C to +85°C (typical) Storage Temperature Range: -40°C to +85°C Flame Rating: UL94 V-0 compliant Applications Power supply units Industrial control systems Consumer electronics Battery chargers AC mains protection circuits Compliance & Standards RoHS compliant UL recognized materials (depending on manufacturer variant) Notes Ensure compatibility with selected fuse rating and type Observe proper PCB layout spacing for high-voltage applications Follow safety standards when used in mains-powered circuits #commonpartslibrary #circuitprotection #fuseholder

Fuse Block 15A 600V 1 Circuit Cartridge Through Hole #commonpartslibrary #circuitprotection #fuseholder

Automotive Mini Blade Fuse Holder (PCB Mount) – Single-circuit PCB-mount fuse holder designed for automotive electronics, industrial equipment, power distribution boards, battery management systems, embedded controllers, and circuit protection applications. Manufactured by Keystone Electronics (Series MINI® 297), it accepts Miniature (ATM) blade fuses and is rated for 30 A and 500 V. Features a vertical through-hole PCB mounting, PC pin termination, brass contacts with tin plating for low contact resistance and reliable conductivity, and is UL recognized for safety. The compact design provides secure retention of 11.0 mm × 3.85 mm mini blade fuses, making it suitable for high-current PCB-based protection circuits in automotive and industrial environments. #KeystoneElectronics #3568 #MiniBladeFuseHolder #ATMFuseHolder #FuseHolder #CircuitProtection #PCBMount #ThroughHole #AutomotiveElectronics #IndustrialElectronics #PowerDistribution #EmbeddedSystems

PCB-Mount Mini Blade Fuse Holder – Single-circuit through-hole fuse holder for Mini (ATM/FK1) automotive blade fuses used in automotive, commercial vehicle, industrial, and power distribution applications. Features a 32 V operating voltage (125 VDC maximum per manufacturer datasheet), 30 A maximum current rating, vertical PCB mounting, and PC pin through-hole termination. Constructed with tin-plated copper alloy spring contacts and a heat-resistant UL94 V-0 thermoplastic housing, supporting 7.62 mm terminal pitch for easy PCB layout. Designed for Mini (ATM/FK1) blade fuses and suitable for modular row mounting. #Littelfuse #17867640001 #FL1 #FuseHolder #MiniBladeFuse #ATMFuse #PCBMount #ThroughHole #Automotive #CircuitProtection #PowerDistribution #EmbeddedSystems

Fuse Block 20 A 250V 1 Circuit Cartridge Through Hole #commonpartslibrary #circuitprotection #fuseholder

Fuse Holder 20 A 250V 1 Circuit Cartridge Through Hole The 696309001002 is a vertical PCB terminal block connector manufactured by Wurth Elektronik. It is designed for reliable wire-to-board connections in industrial control, power distribution, embedded electronics, and automation systems. The connector features a compact through-hole design with screw clamp wire termination for secure electrical and mechanical contact. Its modular construction supports easy field wiring and dependable long-term operation in demanding environments. Engineering Specification Manufacturer: Wurth Elektronik Manufacturer Part Number: 696309001002 Product Type: PCB Terminal Block Connector Style: Wire-to-Board Mounting Type: Through Hole Orientation: Vertical Number of Positions: 2 Pitch: 5.00 mm Wire Termination Method: Screw Clamp Wire Entry Direction: Top Entry Contact Material: Copper Alloy Contact Plating: Tin Housing Material: High Temperature Thermoplastic Housing Color: Green Rated Voltage: 300 V Rated Current: 16 A Supported Wire Gauge: 24 AWG to 12 AWG Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94 V-0 RoHS Compliance: Yes Applications: Industrial controls, power interfaces, embedded systems, automation equipment, power supply connections, signal and low-voltage wiring systems. #commonpartslibrary #circuitprotection #fuseholder

Fuse Holder 6.3 A 250V 1 Circuit Cartridge Through Hole PCB-Mount Fuse Holder designed to secure 5 mm x 20 mm cartridge fuses for overcurrent protection applications. The PTF series fuse holder supports a rated voltage of 250 V and current rating of 6.3 A, with a single circuit, through-hole PCB mounting configuration, and PC pin termination. #FuseHolder #CircuitProtection #PCBMount #Littelfuse #PTFSeries

Fuse Block 20 A 250V 1 Circuit Cartridge Through Hole Fuse Holder Block for PCB mounting applications, designed to hold 5 × 20 mm fuse links with clip cover configuration. The WR-FSH fuse holder supports a current rating of 20 A (UL) and 10 A (VDE), with a working voltage of 250 VAC, withstand voltage of 1.5 kV, contact resistance of 5/10 mΩ max, and an operating temperature range of -30°C to +120°C. #FuseHolder #PCBMount #WRFSH #CircuitProtection #ThroughHole #WurthElektronik

Fuse Holder 10A 250V 1 Circuit Cartridge Through Hole PCB Fuse Holder for 5 × 20 mm cartridge fuses, designed for through-hole PCB mounting. The Eaton BK/H15-V-1 supports a maximum voltage rating of 250 V AC and a current rating of 15 A, providing a secure fuse mounting interface for circuit protection applications. #PCBComponent #FuseHolder #ThroughHole #CartridgeFuse #Eaton #CircuitProtection

OGN-SMD FUSEHOLDER 5X20

The 24F 5A250V is a panel-mount cartridge fuse holder designed to securely accommodate and electrically connect cartridge fuses in power distribution and protection circuits. It provides a reliable interface between the fuse element and the electrical system, enabling easy fuse replacement while maintaining electrical safety and mechanical stability. Commonly used in industrial equipment, consumer electronics, power supplies, appliances, instrumentation, and control systems, the fuse holder supports circuit protection against overload and fault conditions while ensuring convenient maintenance and serviceability. Engineering Specification Device Type Panel-Mount Cartridge Fuse Holder Fuse Compatibility Cartridge Fuse Installation and Retention Current Rating Suitable for Low-Voltage Power Protection Applications Voltage Rating Compatible with AC Power Distribution Circuits Mounting Style Panel Mount Connection Method Solder Terminal or Wire Connection Interface Contact Material Conductive Metal Contacts with Corrosion Resistance Housing Material Insulating High-Temperature Polymer Construction Mechanical Characteristics Secure Fuse Retention Easy Fuse Replacement Stable Mechanical Assembly Durable Construction Safety Characteristics Electrical Isolation Support Reliable Contact Performance Overcurrent Protection Interface Safe Fuse Accessibility Environmental Characteristics Long Service Life Resistance to Mechanical Wear Suitable for Commercial and Industrial Environments Applications Power Supplies Industrial Control Equipment Consumer Electronics Electrical Appliances Instrumentation Systems Battery Chargers Test Equipment Automation Systems Distribution Panels Embedded Electronic Devices Features Compact Panel-Mount Design Reliable Electrical Contact Easy Maintenance Access High Mechanical Durability Secure Fuse Retention Mechanism Simple Installation Wide Application Compatibility RoHS Compliant Construction Component Category Fuse Holder #commonpartslibrary #passivecomponents #fuseholder #circuitprotection #overcurrentprotection #powerelectronics #powersupply #industrialelectronics #electricalsafety #panelmount #electroniccomponents #powermanagement #protectioncircuit #controlsystems #applianceelectronics

Fuse Holder 32V 1 Circuit Blade Through Hole The 178.6764.0001 is an automotive blade fuse holder from Littelfuse, part of the MINI® FL1 series, designed for direct PCB mounting (through-hole). It allows easy integration of a single MINI blade fuse into a printed circuit board for overcurrent protection. This component is commonly used in automotive electronics, industrial control systems, and embedded power circuits, where compact and reliable fuse protection is required. Key Features Fuse Type Compatibility Supports MINI® automotive blade fuses (ATM/APM type) PCB Mount (Through-Hole) Designed for direct soldering to PCB for strong mechanical support Current Capability Up to 30 A maximum ~22 A continuous rating Voltage Rating Up to 58 VDC (automotive systems) Single Fuse Position Holds 1 fuse per holder Thermoplastic Housing Heat-resistant black body UL94 V-0 flammability rating for safety Contact Material Tin-plated copper alloy terminals for reliable conductivity Standard PCB Pitch Approx. 7.62 mm pin spacing Modular Design Multiple holders can be mounted side-by-side for multi-channel protection blade fuse holder automotive PCB #Circuit-Protection #Fuseholders #FL1