Electronic Fuse Regulator 2.5A 6-WSON (2x2) The TPS25200 is a 5-V eFuse with precision current limit and overvoltage clamp. The device provides robust protection for load and source during overvoltage and overcurrent events.

12V/5V Low-IQ Dual-Channel E-Fuse with Current Monitoring and Low On Resistance #ultralibrarian

12V/5V Low-IQ Dual-Channel E-Fuse with Current Monitoring and Low On Resistance #ultralibrarian

5V/12V eFuse Protection Switch (VSON-10) efuse protection switch VSON*1EP*3x3mm*P0.5mm*

Electronic Fuse Regulator 5.3A 20-WQFN (4x3) TPS25940 eFuse

Hot Swap-Spannungscontroller 2.7-V to 19-V, 85m , 0.13-2A eFuse with selectable over voltage protection clamp in leaded package 8-SO PowerPAD -40 to 125

2.7 - 5.7 V, 4 A, 31-m True Reverse Current Blocking eFuse with Input Reverse Polarity Protection #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Current-regulation #TPS25210

Hot Swap Voltage Controllers 4.5-V to 60-V 31moh m 0.6-6A eFuse with 1 Texas Instruments TPS26637RGER

Electronic Fuse Regulator High-Side 60A 26-VQFN-HR (5x4.5) The TPS259850RQPR is an integrated eFuse power protection device designed for robust power path management in low-voltage DC systems. Manufactured by Texas Instruments, this device provides advanced protection features including overvoltage protection, undervoltage protection, overcurrent limiting, short-circuit protection, reverse current blocking, and thermal shutdown. The device is optimized for applications requiring controlled inrush current, fault isolation, and system reliability in industrial, automotive, telecommunications, and embedded electronic systems. The TPS259850RQPR supports a wide operating input voltage range and integrates programmable protection thresholds to allow flexible system-level configuration. The device includes an internal MOSFET with low on-resistance for efficient power delivery while minimizing power dissipation. Fast fault response and automatic retry functionality enhance system robustness and reduce the need for external supervisory circuitry. The device is housed in a compact QFN package suitable for space-constrained PCB designs and supports high-current operation with efficient thermal performance. The integrated protection architecture simplifies power subsystem design while improving reliability and fault tolerance. Electrical Characteristics Input operating voltage range supports low-voltage DC power rails commonly used in embedded and industrial systems. Integrated low-RDS(on) MOSFET minimizes conduction losses and improves overall efficiency. Programmable current limiting enables configurable overcurrent protection. Fast short-circuit response protects downstream circuitry during fault events. Adjustable overvoltage and undervoltage thresholds allow flexible supply monitoring. Reverse current blocking prevents back-drive conditions and protects power sources. Thermal shutdown protection disables the device during excessive junction temperature conditions. Controlled output slew rate limits inrush current during startup and hot-plug events. Automatic retry and latch-off fault management modes are supported. Power-good indication output provides system power status monitoring. Protection Features Overcurrent protection with programmable current limit threshold. Short-circuit protection with rapid fault response. Input overvoltage protection. Input undervoltage lockout protection. Reverse current and reverse polarity protection support. Thermal shutdown with automatic recovery capability. Fault timer control for transient fault management. Safe hot-swap and hot-plug operation support. Mechanical Characteristics Package type is QFN with compact footprint optimized for high-density PCB layouts. Surface-mount device compatible with automated assembly processes. Thermally enhanced package construction improves heat dissipation. RoHS-compliant and suitable for lead-free manufacturing processes. Applications Industrial power distribution systems. Automotive electronic subsystems. Telecommunication and networking equipment. Server and storage platforms. Hot-swappable modules. USB Type-C and power delivery systems. Embedded computing platforms. FPGA and processor power rail protection. Battery-powered and portable electronic equipment. #commonpartslibrary #integratedcircuit #powermanagement #regulator

Electronic Fuse Regulator 4A 8-WSON (2x2) The TPS259530DSGR is a compact, integrated eFuse protection device designed to provide robust power-path management for low-voltage DC systems, particularly nominal five-volt rails. It combines multiple protection and control features into a single solution, enabling safe distribution of power to downstream circuitry while minimizing the need for external components. The device supports controlled inrush current during startup, continuous current monitoring, and rapid fault response to protect both the power source and the load. Integrated protection mechanisms include overvoltage protection, undervoltage lockout, overcurrent limiting, thermal shutdown, and reverse current blocking. This makes the device well suited for applications requiring high reliability, such as embedded systems, industrial electronics, consumer devices, and communication equipment. Functional Description The device operates as a high-side protection switch using an internal MOSFET to control current flow from the input supply to the load. It monitors input voltage, output current, and internal temperature to ensure operation within safe limits. When a fault condition such as overcurrent or overvoltage is detected, the device limits or interrupts current flow to prevent damage. The integrated control loop provides smooth startup by limiting inrush current and preventing supply droop. Reverse current blocking prevents unwanted current flow from the output back to the input when the input supply is removed or drops below the output level. Electrical Characteristics The device supports operation across a wide input voltage range suitable for low-voltage DC systems, including typical five-volt rails. It features an adjustable overvoltage protection threshold aligned with five-volt system requirements, along with configurable undervoltage lockout to ensure proper system startup and shutdown behavior. The current limit is externally programmable, allowing flexibility for different load conditions. The device exhibits low on-resistance to minimize power dissipation and voltage drop during normal operation. Protection Features The TPS259530DSGR integrates multiple protection functions to enhance system robustness. Overvoltage protection prevents excessive input voltage from reaching the load. Undervoltage lockout ensures the device only operates when the input supply is within a valid range. Overcurrent protection actively limits current during fault conditions and can respond rapidly to short circuits. Thermal shutdown protects the device from overheating by disabling operation when internal temperature exceeds safe limits. Reverse current blocking prevents backflow of current, safeguarding both the source and load. Control and Interface The device includes an enable control input that allows external control of the power path. It supports configurable behavior for fault response and recovery, depending on system design. External components can be used to set thresholds such as current limit and undervoltage lockout, providing design flexibility. Status signaling allows system-level monitoring of fault conditions. Mechanical and Package Information The TPS259530DSGR is provided in a compact surface-mount package suitable for space-constrained applications. The package is optimized for thermal performance and efficient PCB layout, enabling reliable operation under varying load conditions. It is supplied in tape-and-reel format for automated assembly processes. Applications This device is intended for use in systems requiring reliable power distribution and protection. Typical applications include five-volt power rails in embedded systems, industrial control modules, consumer electronics, communication devices, and peripheral power management circuits. Summary The TPS259530DSGR offers an integrated, high-reliability solution for power path protection and management in low-voltage systems. Its combination of protection features, configurability, and compact form factor makes it a widely used choice for safeguarding five-volt supply rails in modern electronic designs. #commonpartslibrary #integratedcircuit #powermanagement

Electronic Fuse Regulator 5.3A 20-WQFN (3x4) The TPS25940 is a compact, feature-rich eFuse (electronic fuse) power switch from Texas Instruments designed to provide advanced power-path protection and management for SSDs, storage systems, servers, telecom equipment, and other DC-powered applications. It integrates back-to-back MOSFETs for true reverse-current blocking, programmable current limiting, overvoltage/undervoltage protection, and controlled output slew-rate management in a small 20-pin WQFN package. Key Features Wide operating voltage range: 2.7 V to 18 V (20 V maximum input) Low 42 mΩ typical on-resistance (RDS(on)) Adjustable current limit from 0.6 A to 5.3 A True reverse-current blocking using integrated back-to-back FETs Fast reverse-voltage shutdown response of 1 µs Programmable output ramp-up (dV/dt control) for inrush-current management Programmable overvoltage (OVP) and undervoltage (UVP) protection thresholds Integrated IMON analog current-monitor output PGOOD and FLT status outputs for system monitoring Low-power DevSleep™ mode for SATA SSD applications Typical operating quiescent current of 200 µA Typical disabled current of 15 µA Operating junction temperature range from −40°C to +125°C UL 2367 recognized and designed for fault-safe operation under single-point failure conditions. Typical Applications PCIe, SATA, and SAS SSD/HDD storage devices Enterprise servers and storage systems RAID controller cards with holdup-power management Telecom switches and routers Set-top boxes, DTVs, and gaming consoles Adapter-powered equipment General-purpose smart load-switch and power-protection circuits. Package Information Package: 20-pin WQFN (RVC) Temperature range: −40°C to +85°C ambient operation Tape-and-reel packaging for automated assembly. #CommonPartsLibrary #IntegratedCircuit # TPS25940

60V, 6A Power Limiting, Surge Protection Industrial eFuse, Adjustable Overvoltage cut-off, Active Current Limiting, VQFN-24 efuse protection switch Texas*RGE0024H*

60V, 6A Power Limiting, Surge Protection Industrial eFuse, 35V fixed Overvoltage clamp, Active Current Limiting, VQFN-24 efuse protection switch Texas*RGE0024H*

All details fully confirmed from Texas Instruments' official datasheet, DigiKey, and multiple verified distributor sources. Here's the complete spec. Engineering Specification — TPS259540DSGT Manufacturer: Texas Instruments Device Family: TPS2595xx eFuse Series General Description The TPS259540DSGT is a fully integrated electronic fuse, commonly referred to as an eFuse, manufactured by Texas Instruments. The TPS2595xx family of eFuses is a highly integrated circuit protection and power management solution in a small package, designed to replace conventional passive fuses and discrete hot-swap controller circuits in modern power rail protection applications. Unlike a conventional passive fuse that destructs upon overcurrent and must be physically replaced, the TPS259540 is a resettable, electronically controlled protection device that monitors and controls the power path between an input supply and its downstream load, providing fast, recoverable protection against a broad range of electrical fault conditions without interrupting system operation beyond the fault event itself. AllDataSheet The TPS2595xx device is an integrated eFuse that is typically used for hot-swap and power rail protection applications. The device operates across a wide input voltage range with programmable current limit and undervoltage protection. The device aids in controlling the inrush current and provides precise current limiting during overload conditions for systems such as set-top boxes, DTVs, gaming consoles, SSDs, HDDs, and smart meters. The device also provides robust protection for multiple faults on the sub-system rail. Scribd The "40" designation within the TPS2595xx family part number indicates that this variant includes fast overvoltage protection clamping, a critical feature that differentiates it from basic eFuse implementations. Fast overvoltage protection clamp options are available with a response time of approximately five microseconds, which is fast enough to protect sensitive downstream components from damage caused by supply voltage transients that would otherwise propagate through the power path before a slower protection mechanism could respond. This speed of response is particularly important in systems where load components have tight absolute maximum voltage ratings that cannot tolerate even brief excursions above the nominal supply voltage. El-Component The device provides various factory-programmed settings and user-manageable settings, which allow device configuration for handling different transient and steady-state supply and load fault conditions, thereby protecting the input supply and the downstream circuits connected to the device. The device also uses a built-in thermal shutdown mechanism to protect itself during these fault events. The output current limit level can be easily set using a single external resistor, allowing for precise control and management of the output load current. Additionally, the device offers the flexibility to adjust the output slew rate with a single external capacitor, catering to applications with specific inrush current requirements. ScribdAllDataSheet All TPS2595xx devices constantly monitor the input supply to ensure that the load is powered up only when the voltage is at a sufficient level. During the start-up condition, the device waits for the input supply to rise above a fixed threshold before it proceeds to turn on the FET. Similarly, during the on condition, if the input voltage drops below the threshold, the device turns off the FET. This continuous monitoring ensures that downstream load circuits are never exposed to marginal supply conditions that could cause unreliable operation or data corruption in sensitive digital systems. Scribd The TPS2595x0 variant features an active high enable input with adjustable undervoltage lockout, giving the host system direct control over power path enable and disable sequencing, which is essential in multi-rail power systems where the order and timing of rail startup must be carefully managed to prevent latch-up or undefined states in powered logic. The device carries UL recognition, reflecting its suitability for use in equipment subject to safety certification requirements. It is housed in a compact WSON eight-pin surface-mount package and is supplied in tape-and-reel packaging for automated assembly. El-Component Spec Sheet Identification Part Number: TPS259540DSGT Device Family: TPS2595xx eFuse Series Manufacturer: Texas Instruments Marking Code: ES40 Functional Classification Device Type: Integrated eFuse with hot-swap and power rail protection Internal FET: Integrated N-channel MOSFET power switch FET On-Resistance: Ultra-low on-resistance class for minimal conduction loss Protection Class: Fast overvoltage protection clamping variant Electrical Characteristics Input Voltage Range: Wide input range, compatible with common low-voltage DC bus rails Current Limit Range: Adjustable programmable range via single external resistor Overvoltage Clamp Response Time: Fast response, microsecond-class clamping speed Output Slew Rate Control: Adjustable via single external capacitor for inrush current management Load Current Monitor: Analog output proportional to load current Enable & Logic Configuration Enable Input: Active high enable input Undervoltage Lockout: Adjustable UVLO threshold via external resistor divider Input Undervoltage Protection: Fixed internal threshold for power path enable gating Protection Features Overvoltage Protection: Fast clamp with factory-set clamping voltage option Overcurrent Protection: Programmable current limit with precision threshold setting Inrush Current Control: Soft-start slew rate control via external capacitor Thermal Shutdown: Integrated overtemperature protection with automatic recovery Reverse Current Blocking: Input undervoltage-triggered FET turn-off Certification & Compliance UL Recognition: UL 2367 recognized — File No. E169910 Export Classification: EAR99 RoHS Compliance: Yes Target Applications Hot-swap power path management Power rail protection for set-top boxes, gaming consoles, and smart meters SSD and HDD power management Digital TV and consumer AV subsystem power protection Industrial multi-rail power sequencing IoT and embedded system power protection Package Package Type: WSON — Small Outline No-Lead, eight-pin Package Designation: DSG suffix Mounting Method: Surface mount technology (SMT) Packaging Format Supply Format: Tape-and-reel — DSGT suffix #TPS259540 #TPS2595xx #TexasInstruments #eFuse #HotSwap #PowerRailProtection #OvervoltageProtection #CurrentLimit #InrushControl #PowerManagement #WSON #SurfaceMount #IntegratedFET #CircuitProtection #PowerSequencing #SmartPower #SemiconductorIC #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #ULRecognized

TPS259621DDAR ESOP-8_L4.9-W3.9-P1.27-LS6.0-BL-EP LCSC Part Number: C2155774 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TPS2596 eFuse integrated FET hot-swap protection IC, 2.7V to 19V input voltage range, 21V absolute maximum input rating, 0.125A to 2A adjustable current limit, 89mΩ typical on-resistance, accurate current monitor output, active-high enable with adjustable UVLO, fast overvoltage clamp or adjustable OVLO options, adjustable output slew-rate control, overtemperature protection, fault indication pin, IEC 61000-4-4 EFT immunity, -40°C to +125°C junction temperature range, SOIC-8 package. Search Keywords: TPS2596, Texas Instruments TPS2596, TI TPS2596, TPS2596 eFuse, TPS2596 hot swap controller, TPS2596 power protection IC, TPS2596 current limit switch, TPS259620DDA, TPS259621DDA, TPS259630DDA, TPS259631DDA, 2A eFuse, 19V eFuse, 89mOhm eFuse, adjustable current limit eFuse, overvoltage protection eFuse, current monitor eFuse, SOIC-8 eFuse, TPS2596 datasheet Hashtags: #TPS2596 #TexasInstrumentsTPS2596 #TIEFuse #eFuse #HotSwapProtection #PowerProtectionIC #CurrentLimitSwitch #IntegratedFETSwitch #2AeFuse #19VeFuse #89mOhmSwitch #OvervoltageProtection #UVLOProtection #CurrentMonitorIC #FaultIndicator #SOIC8 #TPS259620DDA #TPS259621DDA #TPS259630DDA #TPS259631DDA

IC SURGE STOPPER 2.7V~18V WSON-8-EP(2x2) TPS259530DSGT is a highly integrated eFuse (electronic fuse) from Texas Instruments designed to provide advanced circuit protection and power management for systems operating from 2.7 V to 18 V. It integrates a low-resistance MOSFET, adjustable current limiting, fast overvoltage protection, inrush current control, and thermal shutdown features, making it ideal for hot-swap, industrial, consumer electronics, storage, and adapter-powered applications. Key Features Wide input voltage range: 2.7 V to 18 V 34 mΩ typical integrated MOSFET on-resistance Adjustable current limit from 0.5 A to 4 A Fast overvoltage protection with 5 µs typical response time Adjustable undervoltage lockout (UVLO) Adjustable output slew rate (dV/dt) for inrush current control Load current monitor (ILM) output Fault indication (FLT) output Overtemperature protection (OTP) Hot-swap and hot-plug capable IEC 62368-1 certified and UL recognized Compact 8-pin WSON/DSG package Hashtags #TPS259530DSGT #TexasInstruments #eFuse #HotSwapController #CircuitProtection #PowerManagement #OvervoltageProtection #CurrentLimiting #InrushCurrentControl #IndustrialElectronics #EmbeddedSystems #HardwareDesign #ElectronicsEngineering #PowerSupplyProtection #PCBDesign

TPS25940ARVCR is an integrated eFuse power protection device from Texas Instruments designed to provide advanced power path management and circuit protection for embedded and industrial electronic systems. The device combines power MOSFET control, inrush current limiting, overcurrent protection, overvoltage protection, and thermal shutdown features into a compact integrated solution for reliable power distribution. This eFuse controller is optimized for hot-swap applications, USB power interfaces, industrial control systems, communication equipment, and embedded platforms requiring controlled power sequencing and fault isolation. It enables safe startup behavior, adjustable current limiting, and fast fault response to protect sensitive downstream circuitry from abnormal operating conditions. The TPS25940ARVCR supports programmable protection thresholds and provides robust system reliability by reducing damage risks caused by short circuits, excessive load current, or transient voltage events. Its compact surface-mount package and high integration level simplify PCB layout and minimize external component requirements in modern power management architectures. #commonpartslibrary #efuse #powermanagement #circuitprotection #texasinstruments #hotswapcontroller #embeddedhardware #powersupply #industrialelectronics #electronicscomponents

TPS4816-Q1 is an automotive-qualified high-side switch controller from Texas Instruments designed for intelligent power distribution, battery management, DC/DC converter protection, and automotive power systems. Supporting operating voltages from 3.5 V to 95 V (100 V absolute maximum), the device drives external N-channel MOSFETs and provides advanced protection, diagnostics, and bidirectional current monitoring. Integrated features include overcurrent protection with programmable circuit breaker timer (I²t), fast short-circuit protection, undervoltage and overvoltage protection, reverse polarity protection down to -60 V, gate pre-charge circuitry for capacitive loads, temperature monitoring, and fault diagnostics. The controller is optimized for 12 V, 24 V, and 48 V automotive architectures, offering low standby current, high reliability, and robust protection for power distribution and battery-connected systems. Search Keywords: TPS4816-Q1, TPS4816Q1, Texas Instruments TPS4816, High Side Switch Controller, Automotive High Side Driver, Smart High Side Switch, MOSFET Controller, Battery Protection Controller, Automotive Power Distribution, Electronic Fuse Controller, eFuse Controller, Reverse Polarity Protection IC, Bidirectional Current Monitor, I2t Protection Controller, Automotive Power Management IC, 48V Automotive System, DC DC Converter Protection, Battery Management System Controller, High Voltage Switch Controller, Automotive Diagnostics IC Hashtags: #TPS4816Q1 #TexasInstruments #HighSideSwitch #SmartSwitch #AutomotiveElectronics #PowerDistribution #BatteryManagement #PowerManagement #MOSFETDriver #EFuse #CircuitProtection #CurrentMonitoring #AutomotivePower #DCDCConverter #EmbeddedSystems #PowerElectronics #ElectronicsDesign #PCBDesign #HardwareEngineering #ElectricalEngineering

Hot Swap Controller 1 Channel General Purpose 23-LQFN-CLIP (6x5) The TPS16850VMAR is an automotive-grade integrated hot-swap and protection controller designed for robust power-path management in low-voltage DC systems. The device provides comprehensive protection features including overvoltage protection, undervoltage protection, reverse current blocking, inrush current control, overcurrent protection, and short-circuit protection. It is intended for applications requiring controlled power delivery and fault isolation in harsh electrical environments. The device integrates dual back-to-back MOSFET control to support bidirectional current blocking and safe power switching. Adjustable protection thresholds and timing parameters allow flexible system configuration for various power rail requirements. The TPS16850VMAR supports operation across a wide supply voltage range and is optimized for automotive and industrial systems requiring high reliability and transient immunity. The controller includes fault reporting and system status monitoring functions to support intelligent power management architectures. Soft-start capability minimizes inrush current during startup, reducing stress on connectors, power supplies, and downstream circuitry. Integrated thermal protection enhances system safety during abnormal operating conditions. The TPS16850VMAR is qualified for automotive applications and complies with AEC-Q100 requirements. The device is provided in a compact VQFN package suitable for space-constrained designs and high-density PCB layouts. Key Features Automotive-qualified hot-swap and eFuse controller Wide operating input voltage range Adjustable overvoltage and undervoltage protection Reverse current and reverse polarity protection Inrush current control with programmable soft-start Adjustable overcurrent and short-circuit protection Fault monitoring and reporting outputs Integrated thermal shutdown protection Back-to-back MOSFET control architecture Fast fault response and isolation Support for controlled power sequencing Designed for harsh automotive electrical environments AEC-Q100 qualified for automotive applications Compact VQFN surface-mount package Applications Automotive electronic control units Infotainment and telematics systems ADAS and camera modules Industrial power distribution Hot-swappable system power rails Battery-powered embedded systems Power-path management systems Protection for sensitive downstream electronics Electrical Characteristics Operates from low-voltage DC power rails Supports programmable protection thresholds Integrated current sensing and fault detection High transient immunity for automotive environments Low standby current operation Fast response to overload and fault conditions Mechanical Characteristics Surface-mount VQFN package Compact footprint for dense PCB layouts RoHS-compliant package construction Suitable for automated assembly processes Environmental and Reliability Specifications Automotive AEC-Q100 qualified Extended operating temperature range ESD protection on interface pins Designed for high-reliability applications Supports operation in electrically noisy environments #commonpartslibrary #integratedcircuit #powermanagement #hotswapcontrollers