USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole, USB Type-C receptacle 16 pin power only The UJ20-C-H-G-SMT-2-P16-TR is a USB Type-C receptacle connector designed for USB 2.0 applications. It features a right-angle, surface-mount (SMT) configuration with additional through-hole retention tabs for improved mechanical strength on the PCB. This connector supports reversible USB-C plug insertion, making it suitable for modern embedded systems, consumer electronics, and charging/data interfaces. It is optimized for compact designs while maintaining reliable electrical and mechanical performance. Key Features Electrical Characteristics USB Standard: USB 2.0 (up to 480 Mbps data rate) Rated Current: up to 5 A (VBUS) Rated Voltage: 48 VDC max Mechanical / Physical Connector Type: USB Type-C receptacle Mounting: Surface Mount (SMT) + through-hole stakes Orientation: Right-angle (horizontal) Number of Contacts: 24 positions (16 active + 8 dummy) Contact Plating: Gold (≈3 µin) for durability Mating Cycles: ~10,000 insertions Materials & Build Shielding: Fully shielded (metal shell, SUS304) Insulator Material: UL94 V-0 rated (flame-retardant) Operating Temperature: -25°C to +85°C Packaging: Tape & Reel (TR) for automated assembly Series: UJ20 (Same Sky / former CUI Devices) Typical Applications Embedded systems (e.g., MCU/SoC boards) Power + data interface for IoT devices Consumer electronics (chargers, hubs, accessories) Development boards and custom PCB designs Quick Insight (Design Tip) Even though it’s a USB-C connector, this specific part is USB 2.0 only—so: No SuperSpeed (TX/RX) lines Only VBUS, GND, CC1/CC2, D+ / D- are typically used #CommonPartsLibrary #Connector #USB

Slide Switch SPDT Through Hole, Right Angle The SLW-864574-5A-RA-N-D, manufactured by Same Sky (formerly CUI Devices), is a single-pole double-throw (SPDT) slide switch with a right-angle, through-hole mounting configuration. It features a raised actuator for easy manual operation and is intended for PCB-based applications where space is limited but dependable switching is required. Key Features Switch Type: Slide switch (manual) Circuit Configuration: SPDT (Single Pole Double Throw) Switch Function: ON–ON (selects between two circuits) Contact Timing: Non-shorting (break-before-make) Mounting Type: Through-hole, right-angle Actuator: Raised slide, ~5 mm height Electrical & Mechanical Characteristics Rated Voltage: 50 VDC Rated Current: up to 500 mA Contact Resistance: ≤ 100 mΩ Insulation Resistance: ≥ 100 MΩ Operating Temperature: -20°C to +70°C Mechanical/Electrical Life: ~10,000 cycles Physical Characteristics Dimensions: approx. 8.6 × 4.5 × 6–7 mm Actuator Travel: ~2 mm Termination: PC pins (through-hole soldering) Orientation: Horizontal (right-angle insertion into PCB) #CommonPartsLibrary #Switch

Isolated Module DC DC Converter 1 Output 12V 2.5A 9V - 36V Input The PDQ30-Q24-S12-D is a compact isolated DC-DC converter module from CUI Inc. (also associated with Bel Power Solutions product lines). It is designed to convert a wide input voltage range (9–36 VDC) into a regulated 12 VDC output. This module delivers up to 30 watts of power and is packaged in a through-hole 6-DIP form factor, making it suitable for PCB mounting in industrial and embedded applications. It integrates isolation, regulation, and protection features, providing a reliable power solution for sensitive electronic systems. Key Features Power & Electrical Output power: 30 W Output voltage: 12 VDC Output current: up to 2.5 A Input voltage range: 9 – 36 VDC (wide range) Efficiency: up to ~89% Isolation & Protection 1.5 kV isolation voltage Built-in protections: Overcurrent (OCP) Overvoltage (OVP) Overtemperature (OTP) Short circuit protection (SCP) Undervoltage lockout (UVLO) Design & Integration Through-hole 6-DIP package (easy PCB mounting) Compact size: ~25.4 × 25.4 mm Single output design Remote On/Off control (Enable pin) Environmental Operating temperature: –40°C to +105°C Designed for industrial and commercial (ITE) applications Typical Applications Industrial automation systems Telecom and networking equipment Embedded control systems Robotics and process control Power distribution in PCB designs #CommonPartsLibrary #power-supply #DCDC-Converter #PDQ30-D (30W)

CUI_SJ-63073E CUI Devices 15.7mm Manufacturer Recommendations 1.0

SJ23593DSMTTR Phone Connectors 3.5mm Audio Jack SMT 3cond Tip/Ring swtch 5.1 490-SJ2-3593D-SMT-TR https://www.mouser.co.uk/ProductDetail/CUI-Devices/SJ2-3593D-SMT-TR?qs=DXv0QSHKF4wWj2AnIqZJhQ%3D%3D CUI Devices SJ2-3593D-SMT-TR

Tactile Switch SPST-NO Top Actuated Surface Mount #CommonPartsLibrary #Switch #SMD #CUI #TS06-667

ULTRASONIC SENSOR RECEIVER, 80 DEGREE BEAM ANGLE XDCR_CUSA-R80-15-2500-TH CUI Devices 7.3 mm

CUI_PJ-002AH-SMT-TR CUI Devices 2.0 x 6.5 mm, 5.0 A, Horizontal, Surface Mount (SMT), Dc Power Jack Connector None None https://www.snapeda.com/parts/PJ-002AH-SMT-TR/CUI+Devices/view-part/?ref=eda Manufacturer recommendations https://www.snapeda.com/parts/PJ-002AH-SMT-TR/CUI+Devices/view-part/?ref=snap PJ-002AH-SMT-TR https://www.snapeda.com/api/url_track_click_mouser/?unipart_id=46834&manufacturer=CUI Devices&part_name=PJ-002AH-SMT-TR&search_term=pj-002ah-smt-tr

02/18/2022 Manufacturer Recommendations 12.8 mm CUI

PR125V3601C https://www.cuidevices.com/product/resource/pr12.pdf General Purpose Relays 19 x 15.5 x 15.8 mm, 5 V, 6 A, SPDT (1 Form C), Power Relay 16.1 179-PR12-5V-360-1C https://www.mouser.co.uk/ProductDetail/CUI-Devices/PR12-5V-360-1C?qs=T%252BzbugeAwjjtf8LG%2FWiHrQ%3D%3D CUI Devices PR12-5V-360-1C

HB100 CUI Inc. \nIsolated Module DC DC Converter 1 Output 12V - - 8.3A 9V - 36V Input\n DIP-9 CUI None https://www.snapeda.com/parts/HB100/CUI/view-part/?ref=snap HB100 Not in stock https://www.snapeda.com/parts/HB100/CUI/view-part/?ref=eda

RCJ-017 CONN-TH_RCJ-013 LCSC Part Number: C22359757 JLCPCB Part Class: Extended Part Manufactured by CUI

Tactile Switches TS04-66-95-BK-260-SMT SW-SMD_4P-L6.0-W6.0-P4.50-LS10.0-1 LCSC Part Number: C4365135 JLCPCB Part Class: Extended Part Manufactured by CUI

PJ-080BH AUDIO-TH_PJ-080BH LCSC Part Number: C3094242 JLCPCB Part Class: Extended Part Manufactured by CUI

Buzzers CMT-8504-100-SMT-TR BUZ-SMD_4P-L8.5-W8.5-P8.50-TL-A LCSC Part Number: C22359707 JLCPCB Part Class: Extended Part Manufactured by CUI

Buzzers CSS-0575A-SMT-TR BUZ-SMD_3P-L5.0-W5.0-BL LCSC Part Number: C22359711 JLCPCB Part Class: Extended Part Manufactured by CUI

Buzzers CMA-4544PF-W MIC-TH_BD9.7-P2.54-D0.8-L-FD LCSC Part Number: C22359702 JLCPCB Part Class: Extended Part Manufactured by CUI

Buzzers CMI-9705-0580-SMT-TR BUZ-SMD_L9.7-W9.7 LCSC Part Number: C22359716 JLCPCB Part Class: Extended Part Manufactured by CUI

Buzzers CMI-9653S-SMT-TR BUZ-SMD_L9.6-W9.6-LS10.0-R LCSC Part Number: C22359737 JLCPCB Part Class: Extended Part Manufactured by CUI

MD-60SM DC-IN-TH_MD-60SM LCSC Part Number: C22359735 JLCPCB Part Class: Extended Part Manufactured by CUI