Buck-Boost Switching Regulator IC Positive Adjustable 1.2V 1 Output 3.5A (Switch) 14-VFDFN Exposed Pad The TPS63020DSJT is a high-efficiency synchronous buck-boost DC-to-DC converter manufactured by Texas Instruments. This integrated power management device is designed to provide a stable regulated output voltage from input power sources that may vary above or below the desired output level. The converter automatically transitions between buck and boost operating modes to maintain efficient and continuous voltage regulation across a wide input range. The device integrates low-resistance power MOSFETs, advanced control circuitry, and high-efficiency switching architecture to minimize power loss and optimize battery utilization in portable electronic systems. It is widely used in battery-powered applications, embedded systems, wireless communication devices, portable instrumentation, industrial electronics, and USB-powered hardware requiring compact and reliable voltage regulation. The TPS63020DSJT is optimized for systems powered by single-cell lithium-ion, lithium-polymer, or multi-cell alkaline battery configurations. Its compact package and integrated functionality reduce external component count and simplify PCB layout while delivering high power conversion efficiency and low quiescent current performance. Engineering Specification Device Type Synchronous buck-boost DC-to-DC converter Power Conversion Topology Automatic buck and boost regulation architecture Input Characteristics Supports input voltages above or below regulated output voltage Output Characteristics Stable regulated DC voltage output Switching Technology Integrated synchronous MOSFET switching architecture Efficiency Characteristics High-efficiency power conversion for battery-powered systems Control Features Automatic operating mode transition and load regulation Power Consumption Low quiescent current operation for portable electronics Thermal Characteristics Integrated thermal management and protection features Protection Features Overcurrent protection Thermal shutdown Undervoltage lockout Short-circuit protection Package Type WSON surface-mount package Mounting Style Surface mount technology Applications Portable electronics Battery-powered systems Embedded hardware Wireless communication devices USB-powered electronics Industrial control systems Portable instrumentation IoT devices Consumer electronics Power management systems Manufacturer Texas Instruments #commonpartslibrary #buckboostconverter #dcdcconverter #powermanagement #texasinstruments #powerelectronics #powersupply #embeddedhardware #portableelectronics #batterypowered #surfaceountcomponents #electronicsdesign #voltageregulator #iothardware #industrialelectronics

Buck-Boost Switching Regulator IC Positive Adjustable 2.5V 1 Output 2A 15-PowerVFQFN The TPS63070RNMT is a high-efficiency buck-boost DC-to-DC converter manufactured by Texas Instruments. This power management integrated circuit is designed to provide a stable regulated output voltage from input sources that may be above, below, or equal to the desired output voltage. The device automatically transitions between buck and boost operating modes to maintain efficient and continuous power delivery across varying supply conditions. The converter integrates low-resistance power MOSFETs and advanced control circuitry to achieve high conversion efficiency, low quiescent current, and compact implementation. It is widely used in battery-powered systems, portable electronics, embedded devices, industrial control systems, wireless communication equipment, and USB-powered applications requiring stable voltage regulation from fluctuating power sources. The TPS63070RNMT is optimized for applications demanding high power density, extended battery life, and reliable operation under dynamic load conditions. Its compact package and integrated functionality reduce external component count and simplify PCB design for modern power management architectures. Engineering Specification Device Type Synchronous buck-boost DC-to-DC converter Power Topology Automatic buck and boost mode operation Input Voltage Characteristics Supports input voltages above, below, or equal to output voltage Output Characteristics Regulated fixed or adjustable DC voltage output Switching Technology Integrated synchronous power MOSFET architecture Efficiency Characteristics High-efficiency power conversion across wide operating conditions Control Architecture Advanced PWM/PFM power regulation control Current Capability Designed for medium-to-high current portable power applications Quiescent Current Low standby current for battery-powered operation Thermal Characteristics Integrated thermal protection and efficient heat management Protection Features Overcurrent protection Thermal shutdown Undervoltage lockout Short-circuit protection Package Type VQFN surface-mount package Mounting Style Surface mount technology Applications Battery-powered electronics Portable devices USB-powered systems Industrial automation Embedded systems Wireless communication equipment IoT devices Portable instrumentation Power banks Single-cell battery applications Manufacturer Texas Instruments #commonpartslibrary #powermanagement #buckboostconverter #dcdcconverter #texasinstruments #powerelectronics #powersupply #embeddedhardware #portableelectronics #batterymanagement #surfaceountcomponents #electronicsdesign #voltageregulator #industrialelectronics #usbpower

DC-DC Converters TPS63060DSCT WSON-10_L3.0-W3.0-P0.50-BL-EP-A LCSC Part Number: C2070911 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments TPS63060/TPS63061 high input voltage buck-boost DC/DC converter, 2.5V to 12V input voltage range, fixed and adjustable output voltage options from 2.5V to 8V, up to 93% efficiency, 2A switch current limit, output current up to 2A in buck mode and 1.3A in boost mode depending on conditions, automatic transition between step-down and boost modes, 2.4MHz fixed-frequency operation with synchronization, power-save mode, power-good output, load disconnect during shutdown, overtemperature and overvoltage protection, available in 10-pin 3x3mm WSON package. Search Keywords: TPS63060, TPS63061, Texas Instruments TPS63060, Texas Instruments TPS63061, TI TPS63060, TI TPS63061, TPS6306x buck boost converter, TPS63060 buck boost, TPS63061 buck boost, high input voltage buck boost converter, 2.5V to 12V buck boost, 2A switch current converter, 2.4MHz buck boost converter, WSON-10 buck boost, 3x3mm buck boost converter, TPS63060 datasheet, TPS63061 datasheet Hashtags: #TPS63060 #TPS63061 #TPS6306x #TexasInstrumentsTPS63060 #TexasInstrumentsTPS63061 #TIBuckBoostConverter #BuckBoostConverter #DCDCConverter #HighInputVoltageConverter #2ASwitchCurrent #24MHzConverter #PowerSaveMode #PowerGoodOutput #LoadDisconnect #WSON10 #3x3mmPackage

LED Driver IC 1 Output DC DC Controller SEPIC, Step-Down (Buck), Step-Up (Boost) Analog, PWM Dimming 8-SO-EP # AL8866QSP-13 Engineering Specifications **General Description** The AL8866QSP-13 is an automotive-qualified, multi-topology DC-switching LED controller manufactured by Diodes Incorporated. It is designed to control an external power MOSFET for high-power automotive LED lighting systems. The device supports buck, boost, buck-boost and single-ended primary-inductance converter configurations. Its wide input-voltage range makes it suitable for automotive power systems and various high-voltage LED applications. The controller uses fixed-frequency peak current-mode regulation with spread-spectrum frequency modulation to reduce electromagnetic interference. It supports both analog and pulse-width-modulation dimming through the DIM input. An integrated programmable soft-start function gradually increases the inductor and switching currents during startup to reduce output-voltage and current stress. The open-drain fault output provides system-level fault reporting for abnormal operating conditions. **Engineering Specifications** **Manufacturer:** Diodes Incorporated **Manufacturer Part Number:** AL8866QSP-13 **Component Type:** Automotive LED driver controller **Converter Topologies:** Buck, boost, buck-boost and SEPIC **Control Architecture:** Fixed-frequency peak current-mode control **External Switching Device:** External power MOSFET **Minimum Input Voltage:** Four point seven volts **Maximum Input Voltage:** Eighty-five volts **Maximum Output Voltage:** Eighty-five volts **Switching Frequency:** Four hundred kilohertz **Frequency Modulation:** Spread-spectrum modulation for reduced electromagnetic interference **LED Current Control:** External current-sense resistor and external MOSFET configuration **Feedback Voltage:** Two hundred millivolts **Typical Quiescent Current:** One point eight milliamperes **Typical Efficiency:** Up to approximately ninety-three percent, depending on the application circuit and external components **Dimming Methods:** Analog dimming and pulse-width-modulation dimming **Analog Dimming Range:** One percent to one hundred percent **Analog Dimming Dynamic Range:** Greater than one hundred to one **Pulse-Width-Modulation Dimming Ratio:** One hundred to one at a two-hundred-hertz dimming frequency **Pulse-Width-Modulation Frequency Range:** Approximately one hundred hertz to one kilohertz **Full-Brightness Current Accuracy:** Approximately plus or minus three percent **Low-Level Dimming Current Accuracy:** Approximately plus or minus twelve percent at twenty-percent dimming **Soft-Start Function:** Externally programmable **Fault Output:** Active-low open-drain fault indicator **Protection Features:** Output overvoltage protection, LED open-circuit protection, output undervoltage protection, LED short-circuit protection, cycle-by-cycle overcurrent limitation, current-sense resistor short-circuit protection, inductor and diode short-circuit detection, diode open-circuit protection and thermal shutdown **Automotive Qualification:** AEC-Q100 Grade One qualified **Automotive Documentation:** PPAP capable **Manufacturing Standard:** Manufactured in IATF-certified automotive facilities **Operating Temperature Range:** Minus forty degrees Celsius to positive one hundred twenty-five degrees Celsius **Package Type:** Thermally enhanced SO-8 exposed-pad package **Pin Count:** Eight leads with exposed thermal ground pad **Mounting Style:** Surface mount **Packing Method:** Thirteen-inch tape and reel **Standard Packing Quantity:** Two thousand five hundred components per reel **Moisture Sensitivity:** Level One **Terminal Finish:** Matte-tin-plated leads **Environmental Compliance:** Lead-free, RoHS compliant, halogen-free and antimony-free **Typical Applications** Automotive high-beam and low-beam lighting Automotive daytime running lights Automotive fog lights Automotive turn-signal lights Automotive position lights Automotive brake and stop lights High-power exterior LED lighting Multi-topology automotive LED driver modules #AL8866QSP13 #AL8866Q #DiodesIncorporated #LEDDriver #AutomotiveLED #AutomotiveElectronics #BuckConverter #BoostConverter #BuckBoostConverter #SEPICConverter #PowerElectronics #LEDLighting #ElectronicComponents #EngineeringSpecifications