LED Driver IC 16 Output Linear PWM Dimming 25mA 28-TSSOP The PCA9685 is an I2C-bus controlled 16-channel LED controller optimized for Red/Green/Blue/Amber (RGBA) color backlighting applications. Each LED output has its own 12-bit resolution (4096 steps) fixed frequency individual PWM controller that operates at a programmable frequency from a typical of 24 Hz to 1526 Hz with a duty cycle that is adjustable from 0 % to 100 % to allow the LED to be set to a specific brightness value. All outputs are set to the same PWM frequency. Each LED output can be off or on (no PWM control), or set at its individual PWM controller value. The LED output driver is programmed to be either open-drain with a 25 mA current sink capability at 5 V or totem pole with a 25 mA sink, 10 mA source capability at 5 V. The PCA9685 operates with a supply voltage range of 2.3 V to 5.5 V and the inputs and outputs are 5.5 V tolerant. LEDs can be directly connected to the LED output (up to 25 mA, 5.5 V) or controlled with external drivers and a minimum amount of discrete components for larger current or higher voltage LEDs. The PCA9685 is in the new Fast-mode Plus (Fm+) family. Fm+ devices offer higher frequency (up to 1 MHz) and more densely populated bus operation (up to 4000 pF). Although the PCA9635 and PCA9685 have many similar features, the PCA9685 has some unique features that make it more suitable for applications such as LCD or LED backlighting and Ambilight: • The PCA9685 allows staggered LED output on and off times to minimize current surges. The on and off time delay is independently programmable for each of the 16 channels. This feature is not available in PCA9635. • The PCA9685 has 4096 steps (12-bit PWM) of individual LED brightness control. The PCA9635 has only 256 steps (8-bit PWM). • When multiple LED controllers are incorporated in a system, the PWM pulse widths between multiple devices may differ if PCA9635s are used. The PCA9685 has a programmable prescaler to adjust the PWM pulse widths of multiple devices. • The PCA9685 has an external clock input pin that will accept user-supplied clock (50 MHz max.) in place of the internal 25 MHz oscillator. This feature allows synchronization of multiple devices. The PCA9635 does not have external clock input feature. • Like the PCA9635, PCA9685 also has a built-in oscillator for the PWM control. However, the frequency used for PWM control in the PCA9685 is adjustable from about 24 Hz to 1526 Hz as compared to the typical 97.6 kHz frequency of the PCA9635. This allows the use of PCA9685 with external power supply controllers. All bits are set at the same frequency. • The Power-On Reset (POR) default state of LEDn output pins is LOW in the case of PCA9685. It is HIGH for PCA9635. #CommonPartsLibrary #IntegratedCircuit #PowerManagement

-40℃~+85℃ 120° 3.2V 527nm 5mA 685mcd 80mW Discrete Diode Emerald Green Water Clear 0603 LED Indication - Discrete ROHS The BZ-C0603-G3-F1 is a surface-mount (SMD) 0603 chip LED designed to emit emerald green light (~527 nm). It is optimized for low-power indicator applications and backlighting, offering high brightness in a very small package size suitable for modern compact PCB designs. ⭐ Key Features 📦 Package: 0603 (1.6 × 0.8 mm SMT LED) 💡 Color: Emerald Green / Green LED (~527 nm wavelength) 🔆 Luminous intensity: up to ~685 mcd (typical high-brightness grade) ⚡ Forward voltage: ~2.6 V to 3.2 V (typical at 5 mA) 🔌 Forward current: ~5 mA (typical operating current) 📐 Viewing angle: ~120° wide viewing angle 🔥 Power rating: ~80 mW maximum 🌡️ Operating temperature: −40°C to +85°C 🧲 ESD protection: up to ~2000 V (HBM) ♻️ RoHS compliant, suitable for automated SMT assembly #CommonPartsLibrary #LED

Red 630nm LED Indication - Discrete 1.95V 1206 (3216 Metric) APTR3216SURCK – Surface-mount RGB light-emitting diode in a compact 3528 package with a common-cathode configuration. Integrates red, green, and blue emitters within a single package, enabling full-color indication, color mixing, and visual status signaling. Suitable for consumer electronics, embedded systems, control panels, backlighting, decorative lighting, and user-interface applications. Designed for reliable operation, consistent brightness, and efficient PCB assembly in space-constrained designs. #RGBLED #CommonCathode #3528LED #SMDLED #IndicatorLED #ColorMixing #EmbeddedSystems #ConsumerElectronics #LightingDesign #PCBAssembly

3.5x3.7×1.9 mm, 0.25 W intelligent externally controlled surface-mount device (SMD) type LED SK6812MINIRGBW-NW-P6 is a smart, addressable RGBW LED that integrates red, green, blue, and neutral white (NW) LEDs with a built-in control IC in a compact SMD package. Each LED acts as an individually addressable pixel, allowing precise color and brightness control through a single-wire digital interface. It is commonly used in RGBW lighting effects, backlighting, gaming peripherals, custom keyboards, LED displays, wearables, and decorative lighting applications. Key Features Individually addressable RGB + Neutral White (RGBW) LED Built-in intelligent control IC and constant-current driver Single-wire serial communication interface 32-bit color data (RGBW control) Cascadable design for long LED chains Integrated signal reshaping for reliable data transmission Operating voltage: 3.5V to 5.5V Typical data transmission rate: 800 kbps 256-level grayscale PWM dimming per channel Compact 3.7 mm × 3.5 mm SMD-6 package Built-in power-on reset circuit Wide operating temperature range: -40°C to +85°C Suitable for animations, indicators, displays, and smart lighting applications. #SK6812MINIRGBW #SK6812 #RGBWLED #AddressableLED #SmartLED #NeutralWhiteLED #DigitalLED #PixelLED #LEDLighting #EmbeddedSystems #PCBDesign #IoT #Electronics #LEDDisplay #LightingControl

Red, Green, Blue (RGB) 626nm Red, 528nm Green, 465nm Blue LED Indication - Discrete 2.15V Red, 2.65V Green, 2.85V Blue 6-PLCC The LRTBGWSR-4U4V-JW+8A8B-D8-3S4U-7Z is an automotive-grade RGB surface-mount LED from the OSIRE® E3635 family by ams OSRAM. It integrates independently controllable red, green, and blue LED chips within a compact 6-PLCC package, enabling precise color mixing and dynamic lighting effects. The device is designed for high-reliability applications requiring full-color illumination, status indication, ambient lighting, and display backlighting. Its wide viewing angle, high luminous intensity, and AEC-Q102 qualification make it suitable for automotive interior lighting, industrial controls, consumer electronics, and advanced human-machine interface applications. Features - Package: white PLCC-6 package, silicone resin - Chip technology: Thinfilm / Volume emitter on Sapphire (AlInGaN) - Typ. Radiation: 120° (Lambertian emitter) - Color: λdom = 626 nm (● red); λdom = 528 nm (● true green); λdom = 465 nm (● blue) - Corrosion Robustness Class: 3B - Qualifications: AEC-Q102 Qualified - ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2) Applications - Ambient Lighting - Automotive Aftermarket #CommonPartsLibrary #LED #RGBLED #OSRAM #amsOSRAM #OSIREE3635 #AutomotiveLED #AECQ102 #SMDLED #PLCC6 #IndicatorLED #AmbientLighting #ColorMixing #LRTBGWSR_4U4V_JW_8A8B_D8_3S4U_7Z

LED Lighting WL-SWTP White, Warm 2700K 3V 20mA 120° 1206 (3216 Metric) The 158301227 is a surface-mount white LED manufactured by Würth Elektronik, belonging to the WL-SWTP series of top-view PLCC-packaged light-emitting diodes designed for general illumination, backlighting, and signal indication applications in compact electronics. It is built on a gallium nitride semiconductor chip, the standard chip technology used in high-efficiency white LED production, which achieves white light emission by combining a blue GaN die with a phosphor conversion layer that down-converts a portion of the blue photons into broader-spectrum yellow light, with the combined blue and yellow output perceived by the human eye as white light. This particular variant is characterized by a warm white Sunrise color temperature, placing it in the lowest color temperature tier of the WL-SWTP family. Warm white light at this color temperature produces a yellowish, incandescent-like appearance that is widely preferred in residential, hospitality, and ambient lighting applications where a soft, comfortable visual environment is desired. This makes the device a natural fit for LED-based replacements for incandescent and halogen light sources in T5 and T8 fluorescent tube form factor products, as well as indoor display backlights, decorative architectural lighting, and other applications where a warm light quality is specified or preferred by end users. The WL-SWTP series features fast switching, no infrared radiation, high color rendering index, slim and miniature size, low power consumption, suitability for all SMT assembly methods, a top-view emission direction, and a wide viewing angle. The high color rendering index characteristic of this device means that objects illuminated by it appear with colors close to how they would look under natural daylight illumination, which is an important quality metric in retail, museum, medical examination, and other environments where accurate color representation enhances user experience or functional accuracy. Texas Instruments The PLCC package style used in this device is a molded plastic leaded chip carrier format that provides a well-defined, mechanically stable footprint for surface-mount assembly, with the optical emitting surface oriented perpendicular to the PCB plane in the top-view configuration. This top-view orientation makes the device suitable for direct illumination of surfaces positioned above the PCB, such as diffusers, light guides, or display panels mounted parallel to the LED board. The compact 3014 package footprint allows high-density LED arrays to be assembled on narrow PCB strips or modules, which is typical in LED tube light and edge-lit backlight designs. The device is supplied on tape-and-reel packaging suitable for automated high-speed pick-and-place assembly at production volumes. Spec Sheet Identification Part Number: 158301227 Series: WL-SWTP — SMD White Top View PLCC LED Manufacturer: Würth Elektronik GmbH & Co. KG Functional Classification Device Type: Surface-mount white LED Chip Technology: Gallium Nitride (GaN) with phosphor conversion Emission Type: White light via blue die plus phosphor down-conversion View Direction: Top view — perpendicular to PCB surface Optical Characteristics Emitting Color: Sunrise warm white Color Temperature: Warm white class, lowest CCT tier in WL-SWTP family Color Rendering Index: High CRI class, suitable for color-critical applications Viewing Angle: Wide angle, broad spatial distribution Infrared Radiation: None — no IR emission Electrical Characteristics Operating Current: Standard signal LED drive current class Forward Voltage: Standard GaN white LED forward voltage class Switching Speed: Fast switching capable Thermal Characteristics Thermal Resistance, Junction to Solder Point: Defined per series specification Maximum LED Junction Temperature: Rated to elevated junction temperature class Package & Mechanical Package Type: PLCC (Plastic Leaded Chip Carrier), PLCC-2 style Package Size: 3014 SMD footprint Mounting Method: Surface mount technology (SMT) Assembly Compatibility: Suitable for all standard SMT assembly methods including reflow soldering Target Applications Signal indication and pilot lights Indoor display backlighting General illumination and commercial lighting Replacement for PLCC 3528 devices in T8 and T5 LED tube designs Architectural and ambient lighting systems Environmental & Qualification RoHS Compliance: Yes REACH Compliance: Yes Packaging Supply Format: Tape-and-reel Standard Reel Quantity: Standard volume reel per Würth packaging convention #WuerthElektronik #WuerthElectronic #WLSWTP #WhiteLED #WarmWhiteLED #SunriseLED #PLCCLED #SMDLed #3014LED #TopViewLED #GaNLED #HighCRI #LEDBacklight #GeneralIllumination #IndoorLighting #SignalLED #LightingDesign #OptoelectronicComponent #EngineeringSpec #ComponentLibrary #CommonPartsLibrary #RoHSCompliant #REACHCompliant