DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes.
Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations
Overview: BME280 Sensor data -> uSD card
Click on the bubble comments to see copilot design this project! Very impressed copilot routed all the SPI buses accurately for me.
TODO: Just realized that there is no footprint for the SD Card holder, gotta add that
Also, there needs to be a way to program the ATTINY841, Probably over UART?
AquaTimer is a programmable timer for 12V devices such as lighting, solenoid valves or pumps not only for aquariums. It has three switchable channels for currents up to 2A each and up to 5A in total. Connected lighting can be dimmed if desired and slowly faded in and out to simulate sunrises and sunsets. The internal RTC of the ATtiny is used as a clockwork in conjunction with a 32.768kHz crystal. A backup battery keeps the clock running even if the external power supply is interrupted. Settings are made using three buttons and the OLED display.
DIY BMS using ATTINY841-SSU this hardware has a higher balance current, fuse and TVS diode to help with voltage spikes.
Most importantly, an external crystal to the micro controller (attiny841) which means the device is more reliable in low voltage situations
The ATtiny85 Thermo Buzzer Board is a small but powerful tool that can help you prevent dangerous situations caused by high temperatures, making it an essential device for safety-conscious individuals.
#safetyfirst #hightemperaturewarning #electronicsafety #attiny85project #makerscommunity
TinyCharger is an ATtiny25/45/85-based, single-cell Li-ion battery charger with selectable charging current limit (100mA - 1000mA) and an OLED display for monitoring.
A tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your expensive dev-board and you aren't willing to take apart the project you worked so hard to design. It's our lowest-cost arduino-IDE programmable board!
The Qwiic PC Fan Controller allows you easily control almost any PC fan over the Qwiic bus using the on board ATtiny microcontroller and control firmware. The control firmware monitors the tachometer output of the fan in order to implement PI Control over the fan speed, allowing you to set your desired speed in real units.
The Arduino WS2812b Controller Shield is a shield designed to offload the implementation of the WS2812b protocol to the shield. It is implemented on an ATtiny85, and the Arduino communicates with the shield over standard SPI. The code for the ATtiny85 can be found at https://github.com/k3jph/ws2812b-spi-controller
The ATtiny85 Thermo Buzzer Board is a small but powerful tool that can help you prevent dangerous situations caused by high temperatures, making it an essential device for safety-conscious individuals.
#safetyfirst #hightemperaturewarning #electronicsafety #attiny85project #makerscommunity
The ATtiny85 LED controlled board is a compact microcontroller board that can control multiple LEDs. Perfect for DIY electronics projects. #ATtiny85 #LEDcontroller #microcontroller #DIYelectronics #maker
This is an Energy Meter project leveraging an ATTiny85 microcontroller (U1) to sense current through an ACS712 module (U2). It displays the data in real-time on an OLED display (OLED1) and interacts with three buttons (NEXT, MENU, OK). This compact energy meter is suitable for edge computing and low-power Internet of Things (IoT) applications #project #keypad #arduino #attiny85 #ISP #referenceDesign #edge-computing #edgeComputing #microchip #template #reference-design
This module is a minimalist Arduino Watch design. Consisting of a Microchip ATTINY85-20SU microcontroller, an OLED display for visual output, two user buttons for interface, and a Li-ion Battery for power. The schematic also includes graphic user interface with ISP for programming and minimal passive components for functionality. #wearableDevices #arduino #attiny85
This is an Energy Meter project leveraging an ATTiny85 microcontroller (U1) to sense current through an ACS712 module (U2). It displays the data in real-time on an OLED display (OLED1) and interacts with three buttons (NEXT, MENU, OK). This compact energy meter is suitable for edge computing and low-power Internet of Things (IoT) applications #project #keypad #arduino #attiny85 #ISP #referenceDesign #edge-computing #edgeComputing #microchip #template #reference-design
This is an Energy Meter project leveraging an ATTiny85 microcontroller (U1) to sense current through an ACS712 module (U2). It displays the data in real-time on an OLED display (OLED1) and interacts with three buttons (NEXT, MENU, OK). This compact energy meter is suitable for edge computing and low-power Internet of Things (IoT) applications #project #keypad #arduino #attiny85 #ISP #referenceDesign #edge-computing #edgeComputing #microchip #template #reference-design
