RF Transistor 5 NPN 15V 50mA 550MHz 300mW Through Hole 14-PDIP The CA3046 contains five matched NPN bipolar junction transistors (BJTs) integrated on a single silicon chip. These transistors share a common substrate but are electrically isolated from each other, allowing flexible circuit configurations. It is commonly used in analog circuits where closely matched transistor characteristics are required, such as differential amplifiers and current mirrors. Key Features Type: NPN transistor array IC Number of Transistors: 5 matched transistors Integrated Structure: Monolithic silicon chip Isolation: Each transistor is individually accessible Matching: Good thermal and electrical matching between transistors Package: Typically 14-pin DIP or SOIC (varies by manufacturer) Electrical Characteristics (typical) Collector-emitter voltage (Vce): up to ~15 V (varies by variant) Collector current: a few milliamps per transistor (low-power signal applications) Frequency response: suitable for low to medium-frequency analog circuits Operating temperature: industrial range (depends on manufacturer spec) Typical Applications Differential amplifiers Current mirrors Temperature sensing circuits Signal processing circuits Oscillators and timing circuits General-purpose analog transistor building blocks #CommonPartsLibrary #Transistor # BJT #RF-transistor #Bipolar

17 Position FFC, FPC Connector Contacts, Bottom 0.020" (0.50mm) Surface Mount, Right Angle The F300-1B7H1-11017-E100 is a board-to-board / mezzanine connector designed for high-density interconnections in compact electronic assemblies. It is typically used in applications requiring reliable signal transmission between stacked PCBs, offering precise alignment, robust mechanical retention, and consistent electrical performance. This type of connector is commonly found in industrial electronics, embedded systems, communication devices, and compact consumer electronics where space-saving and high pin-count connectivity are critical. Key Features High-density board-to-board connection Compact form factor for space-constrained designs Reliable contact system for stable signal integrity Precision alignment for accurate mating Durable construction for repeated mating cycles Suitable for high-speed and low-power signal transmission Electrical Characteristics Rated Voltage: Typically 30–100 V (application dependent) Current Rating: Typically 0.3–1.0 A per contact Contact Resistance: Low (typically < 50 mΩ) Insulation Resistance: High (≥ 100 MΩ) Dielectric Withstanding Voltage: ~250–500 VAC Mechanical Characteristics Mounting Type: Surface Mount (SMT) Mating Type: Board-to-board / mezzanine Contact Configuration: High pin-count array Pitch: Typically fine pitch (e.g., 0.3 mm – 0.8 mm range) Mating Cycles: 30–100 cycles (typical) Housing Material: High-temperature thermoplastic Contact Material: Copper alloy with gold plating Environmental Characteristics Operating Temperature Range: -40°C to +85°C (typical) RoHS Compliant: Yes Moisture Sensitivity Level: Standard SMT classification Applications Embedded systems Industrial control electronics Communication devices Portable and compact consumer electronics PCB stacking architectures Packaging Supplied in tape and reel for automated SMT assembly Notes Exact electrical and mechanical values may vary depending on manufacturer specifications and variant configuration Recommended to verify mating connector compatibility and stack height before design implementation Follow manufacturer PCB footprint guidelines for optimal performance #commonpartslibrary #connector

LED Lighting Driver ICs LED Lighting Drivers 4-Channel RGBW Driver, I2C, 1.5x1.5mm TDFN The KTD2027BEWE-TR is a highly integrated, low-power RGB LED driver designed for portable and battery-powered applications. It features a compact WLCSP package and provides precise current control for up to three LED channels. The device includes an I²C-compatible interface, enabling flexible control of brightness, color mixing, and lighting effects. Integrated features such as programmable current sinks, dimming control, and built-in protection mechanisms make it suitable for indicators, backlighting, and decorative lighting in consumer electronics. Key Features Triple-channel constant current LED driver (RGB support) I²C-compatible digital interface Independent brightness control per channel Programmable current up to ~24 mA per channel Built-in PWM dimming and pattern generation Low quiescent current for power-sensitive applications Wide input voltage range Thermal shutdown and overcurrent protection Small WLCSP package (suitable for compact designs) Applications Mobile devices and wearables Status indicators and notification LEDs Backlighting and decorative lighting IoT and portable electronics Absolute Maximum Ratings Supply Voltage (VDD): −0.3 V to +6.0 V Logic Input Voltage: −0.3 V to VDD + 0.3 V Operating Temperature Range: −40°C to +85°C Storage Temperature Range: −55°C to +150°C Recommended Operating Conditions Supply Voltage (VDD): 1.8 V to 5.5 V LED Forward Voltage: Dependent on external LEDs Ambient Temperature: −40°C to +85°C Electrical Characteristics (Typical) Supply Current (Idle): < 1 µA (shutdown mode) Channel Current Accuracy: ±5% (typical) Maximum Output Current: ~24 mA per channel I²C Clock Frequency: Up to 400 kHz (Fast Mode) Functional Description The KTD2027BEWE-TR operates as a constant-current sink driver for RGB LEDs. Each channel can be independently programmed via the I²C interface to control brightness and enable dynamic lighting effects. Internal PWM generators allow smooth dimming without requiring continuous microcontroller intervention. The device also integrates protection features such as thermal shutdown and current limiting to ensure reliable operation. Pin Configuration (Typical WLCSP) VDD – Power supply GND – Ground SDA – I²C data line SCL – I²C clock line LED1 – Current sink output (Red) LED2 – Current sink output (Green) LED3 – Current sink output (Blue) Package Information Package Type: WLCSP (Wafer-Level Chip Scale Package) Mounting: Surface mount Tape & Reel: Yes (TR suffix) Ordering Information KTD2027BEWE-TR: Tape and reel packaging for automated assembly #commonpartslibrary #integratedcircuit #leddriver

Jack Modular Connector 6p6c (RJ11, RJ12, RJ14, RJ25) 90° Angle (Right) Shielded Cat5 The 615006141121 is a board-to-board or wire-to-board connector component designed for reliable electrical interconnection in electronic assemblies. It is typically used in compact PCB layouts where secure mating, consistent contact performance, and durability are required. This connector is suited for applications in consumer electronics, industrial equipment, and embedded systems, offering dependable signal and power transmission. Key Features: Compact connector design for space-constrained applications High-reliability contact interface Designed for PCB mounting ապահով secure mating and retention Suitable for signal and low-power connections Mechanical Characteristics: Mounting Type: Through-hole or surface-mount (depending on variant) Orientation: Vertical or right-angle configuration Contact Configuration: Multi-position connector Pitch: Standard fine-pitch spacing typical for board-level connectors Housing Material: High-temperature thermoplastic Contact Material: Copper alloy with plated finish Electrical Characteristics: Contact Resistance: Low contact resistance for stable signal integrity Insulation Resistance: High insulation resistance Rated Voltage: Suitable for low-voltage applications Current Rating: Designed for signal-level or moderate current carrying Environmental Characteristics: Operating Temperature Range: Suitable for standard industrial temperature ranges RoHS Compliance: Yes Durability: Designed for multiple mating cycles Applications: Embedded systems Consumer electronics Industrial control boards Communication devices PCB interconnect solutions #commonpartslibrary #connector #jackmodular

Bridge Rectifier Single Phase Standard 100 V Surface Mount 4-MiniDIP The HD01-T is a compact, high-reliability rectifier diode bridge designed for general-purpose AC-to-DC conversion applications. It integrates four diodes in a single package to provide full-wave rectification, making it suitable for power supply circuits, battery chargers, and low-power AC input stages. The device is optimized for space-constrained PCB designs while maintaining adequate current handling and voltage blocking capability. Key Features Single-phase full-wave bridge rectifier Compact through-hole package High surge current capability Low forward voltage drop Reliable and robust construction Suitable for automated assembly Electrical Characteristics Maximum Ratings Repetitive Peak Reverse Voltage: typically up to 100 V Average Forward Rectified Current: typically up to 1 A Peak Forward Surge Current: high surge tolerance for transient conditions Forward Characteristics Forward Voltage Drop: low, typically around 1.0 V per diode at rated current Reverse Characteristics Reverse Leakage Current: low under rated reverse voltage conditions Mechanical Characteristics Package Type: HD (through-hole, compact square package) Mounting: Through-hole PCB mounting Lead Configuration: 4-pin (AC, AC, +, −) Encapsulation: Molded plastic body for insulation and durability #commonpartslibrary #diodes #bridgerectifier

3 Position Wire to Board Terminal Block Horizontal with Board 0.138" (3.50mm) Through Hole The EBWA-03-A is typically identified as a 3-position board-to-wire connector (wafer/header type) used for making compact and reliable electrical connections between a PCB and external wiring harnesses. It is commonly used in consumer electronics, industrial control boards, and embedded systems, especially where a small, low-profile connector is required for signal or low-power connections. Note: The exact manufacturer and series naming for “EBWA-03-A” can vary depending on supplier, so slight differences in mechanical or electrical specs may exist across sources. 01x03 terminal block 3.50mm #CommonPartsLibrary #Connector #Terminal block

This is an Energy Meter project leveraging an ATTiny85 microcontroller (U1) to sense current through an ACS712 module (U2). It displays the data in real-time on an OLED display (OLED1) and interacts with three buttons (NEXT, MENU, OK). This compact energy meter is suitable for edge computing and low-power Internet of Things (IoT) applications #project #keypad #arduino #attiny85 #ISP #reusable #module #edge-computing #edgeComputing #microchip #sublayout

Automotive, dual, 40-V 4.5-MHz low-power operational amplifier #CommonPartsLibrary #IntegratedCircuit #Op-amp #Amplifier

Low-Power Quad-Channel Digital Isolator, 150Mbps, 2.5-5.5V, 2.5kV isolation, Fail-Safe Low, SOIC-16W 4Ch 4In Quad Digital Isolator 150Mbps SOIC*7.5x10.3mm*P1.27mm*

RV1106 is a Rockchip AI vision SoC designed for smart cameras and edge AI applications. It integrates a CPU + ISP + NPU, enabling real-time video processing, AI inference (like face/object detection), and low-power operation in compact embedded systems. #Microcontroller

A high-performance, low-power optical gaming mouse sensor IC from PixArt, featuring up to 26,000 CPI resolution, 650 ips tracking speed, and a 4-wire SPI interface, packaged in a 16-pin DIP with integrated infrared illumination for precise motion detection.

Buck Switching Regulator IC 0.5V~1.5V 1 Output 7A WLCSP-20 The RK860-2 is a low-dropout (LDO) linear voltage regulator IC designed to provide a stable, low-noise output voltage from a higher input supply. It is commonly used in small electronic modules, microcontroller power rails, and low-power analog/digital circuits where clean voltage regulation is important. Type: Low Dropout Linear Regulator (LDO) Input voltage: Typically up to ~6V (varies by variant) Output voltage: Fixed or adjustable (depends on suffix version) Dropout voltage: Low (suitable for battery-powered systems) Output current: ~300 mA to 600 mA class (package dependent) #CommonPartsLibrary #IntegratedCircuit #PowerManagement #RK860

The PAT9125EL-TKIT from PixArt Imaging Inc. is a low-power optical tracking miniature chip designed for precise motion detection using laser-based optical navigation technology. It integrates both the optical sensor and VCSEL laser light source into a single compact package, enabling accurate tracking even on smooth or glossy surfaces. This device captures sequential surface images and processes them internally to determine movement direction, speed, and displacement (X/Y data), which can be accessed by a host controller via digital interfaces. It is particularly suited for space-constrained, battery-powered, and enclosed systems, eliminating the need for mechanical components like code wheels or special surface markings. Key Features Integrated optical sensor + VCSEL laser (850 nm) in a single package No external lens required, simplifying design Wide depth of field (DOF): 1–30 mm, even on reflective surfaces Programmable resolution up to ~1275 CPI Supports I²C (TKIT) interface (SPI variant available as TKMT) Motion detection interrupt output Built-in oscillator (no external clock needed) Low power consumption: Run: ~0.7 mA Sleep: down to 10 µA Power-down: ~5 µA Pre-calibrated laser (no calibration required) IEC/EN 60825-1 Class 1 eye-safe laser compliant Key Specifications Supply Voltage: VDD: 1.7–3.6 V VLD (laser): 2.7–3.6 V Max Tracking Speed: up to ~30 inches/sec Package: 8-pin LGA (3.5 × 3.2 × 1.0 mm) Interface: I²C (for TKIT variant)

WS72324Q-16/TR is a quad low-power operational amplifier featuring rail-to-rail input and output capability. It is optimized for low-voltage, battery-powered applications with ultra-low quiescent current while maintaining good AC performance. The device supports single-supply operation and includes four independent op-amps in a compact QFN 3×3 mm package. Engineering Specifications Manufacturer Will Semiconductor (Will Semi) Part Number WS72324Q-16/TR Device Type Quad Operational Amplifier (4 channels) Package QFN 3×3 mm, 16-pin, 0.5 mm pitch Mounting Type Surface Mount (SMD) Electrical Characteristics Supply Voltage Range 1.8 V to 5.5 V Quiescent Current 42 µA typ per amplifier Gain Bandwidth Product (GBWP) 1.5 MHz Slew Rate 1.1 V/µs Input Offset Voltage ±3 mV max Offset Voltage Drift 1 µV/°C Input Bias Current ~1 pA typ Common Mode Rejection Ratio (CMRR) 101 dB typ Power Supply Rejection Ratio (PSRR) 105 dB typ Output Current (Short Circuit) 43 mA source / 47 mA sink Total Harmonic Distortion + Noise -102 dB @ 1 kHz -90 dB @ 10 kHz Input / Output Characteristics Input Type Rail-to-rail input Output Type Rail-to-rail output Common Mode Input Range (V−) − 0.2 V to (V+) + 0.2 V Output Voltage Swing Near rail-to-rail (load dependent) Load Drive Capability Down to 2 kΩ load Operating Conditions Operating Temperature Range −40°C to +125°C Maximum Supply Voltage 6 V Package Mechanical Data (QFN3x3-16L) Body Size 3.0 mm × 3.0 mm nominal Pin Pitch 0.50 mm Pad Width (b) 0.20 – 0.30 mm Pad Length (L) 0.25 – 0.35 mm Functional Features Rail-to-rail input/output operation Ultra-low quiescent current for battery applications No phase reversal with overdriven inputs No crossover distortion High CMRR and PSRR Stable with capacitive loads Typical Applications Active filters Battery-powered systems Portable medical devices Gas/smoke sensing circuits Low-side current sensing #commonpartslibrary #integratedcircuit

A general-purpose PNP bipolar junction transistor (BJT) in a TO-92 package, designed for low-power switching and amplification applications. #CommonPartsLibrary #TransistorBJT

137 MHz to 525 MHz Low Power Long Range Transceiver, spreading factor from 6 to 12, LoRA, QFN-28 low-power lora transceiver QFN*1EP*6x6mm*P0.65mm*

Single 1.8V Low-Power Open-Drain Output Comparator, SOT-23-5 cmp collector SOT?23*