I can’t start PCB creation right now because this workspace has no available ACUs, so AI execution tools are unavailable.
What’s accomplished so far:
- No project changes have been made in this session.
- I identified that the target is a PCB around the Rockchip RV1106G3 / RV1106 vision SoC project.
What remains to be done once ACUs are available:
- Confirm the exact RV1106G3 package/part variant and required peripherals.
- Build or verify the schematic: power rails, DDR/memory, boot flash, camera interface, USB/UART/debug, clocks, reset, and power sequencing.
- Research datasheet/reference design constraints for the RV1106G3.
- Place the SoC, memory, PMIC/regulators, decoupling, clocks, connectors, and high-speed interfaces.
- Define stackup/impedance rules and route critical nets.
- Run ERC/DRC and prepare manufacturing outputs.