Seeed Studio CAN Bus Breakout Board is an expansion board compatible with all XIAO development boards. The integration of the MCP2515 controller and SN65HVD230 transceiver chips on the expansion board ensures seamless and efficient communication over the CAN Bus.

This is a ESP8684-MINI-1 Module for easy and fast design. The minimum necessary for development is stored on the board. There is USB C with CH340 for firmware, EN, and BOOT buttons #IoT #WiFi #MCU #RF #ESP32 #reusable #module #simple-embedded #espressif #sublayout

This is a ESP8684-MINI-1U Module for easy and fast design. The minimum necessary for development is stored on the board. There is USB C with CH340 for firmware, EN, and BOOT buttons #IoT #WiFi #MCU #RF #ESP32 #reusable #module #simple-embedded #espressif #sublayout

BNO085 - Accelerometer, Gyroscope, Magnetometer, 3 Axis Sensor Evaluation Board The BNO085 Evaluation Board is a development platform designed to evaluate and prototype applications using the BNO085 9-axis Inertial Measurement Unit (IMU). It integrates a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer with an onboard ARM Cortex-M0+ processor running advanced sensor fusion algorithms. The board provides accurate real-time orientation, motion tracking, rotation vectors, and heading information while offloading complex sensor fusion calculations from the host microcontroller. It is widely used in robotics, AR/VR systems, drones, motion tracking devices, navigation systems, and IoT applications. The evaluation board typically supports I²C, SPI, and UART communication interfaces, enabling easy integration with various embedded platforms. Key Features 9-DOF motion sensing with integrated accelerometer, gyroscope, and magnetometer Built-in ARM Cortex-M0+ processor for onboard sensor fusion Real-time orientation output including quaternions, Euler angles, and rotation vectors Supports I²C, SPI, and UART communication interfaces High-speed motion tracking with low latency operation Dynamic calibration for improved accuracy and stability Integrated motion detection features such as step counting and activity tracking Configurable sensor data rates and timestamped sensor reports Low-power operation suitable for battery-powered applications Ideal for robotics, VR/AR, wearable devices, navigation, and industrial motion sensing #BNO085 #IMU #9DOF #SensorFusion #MotionTracking #OrientationSensor #Robotics #EmbeddedSystems #IoT #WearableTech #ARVR #Navigation #EvaluationBoard #Accelerometer #Gyroscope #Magnetometer #commonpartslibrary #developmentboard #accelerometer

The Seeed Studio RS-485 Breakout Board is a versatile RS-485 expansion designed for all Seeed Studio XIAO development boards. Equipped with the TP8485E transceiver IC, this breakout board efficiently converts UART serial streams to RS-485 signals. Operating as a half-duplex transceiver, the TP8485E enables unidirectional communication, spanning distances of up to 1200 meters. This breakout board is engineered for efficiency, consuming power from a single 5V or 12VDC power source. Its RS-485 output is facilitated through 3-pin terminals for both signal wires and power connections. These features collectively make it an ideal choice for robust data transmission across extensive distances and in challenging, high-noise environments.

The ESP32-DevKitC is an official ESP32-based development board from Espressif Systems designed for rapid prototyping and IoT application development. It integrates an ESP32 module (such as ESP32-WROOM-32E or ESP32-WROVER variants), USB-to-UART programming interface, power regulation circuitry, reset and boot buttons, and access to most ESP32 GPIOs through dual-row headers. The board is breadboard-friendly and supports wireless connectivity, making it suitable for smart devices, industrial monitoring, home automation, wearable electronics, and embedded control systems. Key Features ESP32 Dual-Core Processor Xtensa® 32-bit LX6 dual-core MCU Up to 240 MHz clock frequency High-performance embedded processing capability. Wireless Connectivity Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth Classic (BR/EDR) and Bluetooth Low Energy (BLE) support. Memory Typically includes 4 MB SPI Flash Some variants provide additional PSRAM for memory-intensive applications. Rich Peripheral Interfaces UART, SPI, I²C, I²S, SDIO ADC and DAC PWM outputs Capacitive touch sensing Pulse counter and timer peripherals. Extensive GPIO Access Most ESP32 pins are broken out to headers Supports digital I/O, interrupts, analog inputs, and communication interfaces. Development-Friendly Hardware USB-to-UART bridge for programming and debugging Dedicated EN (Reset) and BOOT buttons On-board 3.3 V regulator Breadboard-compatible layout. Flexible Power Options Powered through Micro-USB and onboard power circuitry Supports external power connections through header pins. #DevelopmentBoard

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Through Hole, Right Angle The USB4085-GF-A is a USB Type-C receptacle connector designed for compact embedded and consumer electronic applications requiring USB connectivity and power delivery support. It provides a reversible plug interface compliant with USB Type-C mechanical specifications and is commonly used in portable devices, development platforms, industrial electronics, and power-enabled USB systems. This connector supports USB data communication and power connections through a surface-mount design optimized for automated PCB assembly. The device includes integrated through-hole shell stakes for enhanced mechanical retention and durability under repeated insertion cycles. Its compact footprint and standardized pin arrangement enable compatibility with modern USB Type-C implementations while maintaining reliable electrical and mechanical performance. The USB4085-GF-A is suitable for USB charging, data transfer, embedded systems, battery-powered devices, and general-purpose USB Type-C interface applications. Engineering Specification Connector Type USB Type-C Receptacle Connector USB Interface Standard USB Type-C compliant receptacle Mounting Style Surface-mount technology with through-hole shell retention tabs Contact Configuration Dual-row reversible USB Type-C contact arrangement Number of Contacts Twenty-four signal and power contacts Orientation Right-angle PCB mount Data Support USB data communication support compatible with USB Type-C applications Power Capability Supports USB power and charging applications Shielding Integrated metal shell shielding for EMI reduction and mechanical protection Mechanical Retention Reinforced through-hole shell stakes for connector stability and insertion durability Contact Material Copper alloy contacts with plated finish for conductivity and corrosion resistance Housing Material High-temperature thermoplastic suitable for reflow soldering Operating Temperature Range Industrial-grade operating temperature capability suitable for embedded electronic systems Assembly Compatibility Compatible with automated SMT reflow assembly processes Application Areas Portable electronics, embedded systems, industrial controllers, development boards, battery-powered devices, USB charging interfaces, and communication equipment #commonpartslibrary #connector #usbtypec #interface #powermanagement #embeddedhardware #electronics #usbconnector

ESP32-WROOM32 ESP32 802.11 b/g/n (WiFi/WLAN/Wi-Fi 4), Bluetooth® Smart 4.x Low Energy (BLE) Transceiver 2.4GHz Evaluation Board ESP32-POE is an ESP32-based IoT development board that combines Wi-Fi, Bluetooth, Ethernet connectivity, and Power over Ethernet (PoE) in a single platform. It is designed for industrial automation, smart home systems, remote monitoring, and other network-connected embedded applications where both power and data can be delivered through a single Ethernet cable. The board supports the ESP32 dual-core processor and provides expansion interfaces for sensors, storage, and peripherals. FEATURES • ESP32-WROOM-32 WiFi/BLE module • Ethernet 100Mb interface with IEEE 802.3 PoE support • LiPo battery charger • LiPo battery connector • UEXT connector • User button • Reset button • Micro USB with programmer for ESP32 programming • MicroSD card • Two extension connectors 0.1" step spaced at 1" • PCB dimensions: (75 x 28)mm ~ (3 x 1)" #ESP32 #ESP32POE #IoT #Ethernet #PoE #WiFi #Bluetooth #EmbeddedSystems #IndustrialIoT #SmartHome #OpenSourceHardware #Microcontroller #EdgeComputing #Automation #MakerProjects