Connector Header Through Hole 6 position 0.100" (2.54mm) The 640456-6 is a 6-position, single-row wire-to-board header connector from TE Connectivity (AMP series), designed for reliable power and signal connections in a wide range of electronic applications. It features a 2.54 mm pitch and through-hole mounting for strong mechanical retention and ease of assembly. The connector is commonly used with matching crimp housings and terminals, providing a secure and serviceable interconnect solution for PCB-based systems. Key Features 6-position (1x6) header connector 2.54 mm pitch spacing Through-hole mounting (THT) Vertical (top-entry) orientation Friction-lock compatible with mating housings Tin-plated contacts for good conductivity and corrosion resistance Durable thermoplastic housing Mechanical Characteristics Mounting Type: Through Hole Orientation: Vertical (Top Entry) Pitch: 2.54 mm Number of Positions: 6 Row Configuration: Single row Mating Type: Friction fit with compatible housing Termination Type: Solder tails Electrical Characteristics Rated Current: Up to 3 A per contact (depending on wire gauge) Rated Voltage: 250 V AC/DC Contact Resistance: ≤ 20 mΩ (initial) Insulation Resistance: ≥ 1,000 MΩ Dielectric Withstanding Voltage: 1,000 VAC Material Specifications Housing: Thermoplastic, UL94V-0 rated Contacts: Copper alloy Contact Plating: Tin over nickel Environmental Specifications Operating Temperature Range: -40°C to +105°C Storage Temperature: -40°C to +105°C Packaging Information Packaging Type: Bulk or tray (varies by supplier) RoHS Compliant: Yes Lead-Free: Yes Compatible Components Mating Housing: TE Connectivity compatible crimp housings (e.g., AMP series) Crimp Terminals: соответствующие crimp contacts for 2.54 mm systems Typical Applications PCB interconnects Consumer electronics Industrial control systems Power and signal distribution Prototyping and development boards #CommonPartsLibrary #Connector #Header #Male-pins #MTA-100

JST PH Connector Header Through Hole 3 position 0.079" (2.00mm) The B3B-PH-K-S(LF)(SN) is a 3-position, 2.0 mm pitch, through-hole (THT) male header from the JST PH series, designed for wire-to-board connections. It is a top-entry, shrouded connector that mates with JST PH crimp housings, commonly used for compact internal wiring in electronic devices such as consumer electronics, battery connections, and embedded systems. This connector is optimized for high-density PCB layouts, offering a reliable and secure connection with a locking mechanism and low contact resistance. Key Features Mechanical 3 positions (3-pin) 2.0 mm pitch (compact spacing) Through-hole mounting (THT) Top-entry / vertical orientation Shrouded header (prevents misalignment) Detent lock / friction lock for secure mating Electrical Rated current: up to 2A per pin Rated voltage: up to 100V AC/DC Low contact resistance (~10 mΩ max initial) High insulation resistance (≥1000 MΩ) Environmental Operating temperature: -25°C to +85°C Design & Reliability Fully shrouded design → protects pins and ensures proper insertion Reliable contact structure with dimpled contacts for stable connection PCB retention mechanism → improves mechanical stability Tin-plated contacts for good conductivity and solderability Application Use Commonly used for: Battery connectors Sensor modules Embedded systems (e.g., microcontroller boards) Consumer electronics internal wiring Power + signal low-current connections #commonpartslibrary #connector #header #tht

Battery Holder (Open) 9V 1 Cell PC Pin 9V battery holder through hole The BH9VPC is a through-hole, printed circuit board–mount battery holder designed to accommodate a single standard 9 V (PP3) battery. It provides a secure mechanical enclosure and reliable electrical interface for powering electronic assemblies directly from a PCB. The holder is constructed from durable insulating material with integrated metal contacts to ensure stable retention and consistent electrical connection during operation. Its form factor supports straightforward integration into compact designs while maintaining ease of battery replacement. Engineering Specification: The component is intended for through-hole mounting using PC pins that provide both mechanical stability and electrical connection to the circuit board. It supports one 9 V battery with standard snap terminal interface internally routed to PCB pins. The housing material is typically molded plastic with good mechanical strength and electrical insulation properties suitable for general electronic applications. Contact terminals are metal, commonly nickel-plated or equivalent, to ensure low contact resistance and corrosion resistance over repeated battery insertions. The holder is designed for vertical mounting orientation relative to the PCB, with a compact footprint suitable for space-constrained layouts. It provides sufficient retention force to secure the battery under normal handling and vibration conditions encountered in consumer and light industrial electronics. The operating characteristics are aligned with typical 9 V battery usage, supporting low to moderate current applications depending on battery capability. The part is compatible with standard wave soldering processes used in through-hole assembly. It is intended for use in ambient environmental conditions typical of indoor electronic equipment and is not inherently sealed against moisture or contaminants. The design allows easy manual insertion and removal of the battery without specialized tools, supporting maintenance and replacement in field applications. #commonpartslibrary #batteryholder

Connector Header Through Hole 6 position 0.100" Pin Header 1x06 2.54mm PinHeader 1x6 2.54mm The TSW-106-07-G-S is a through-hole vertical header designed for board-to-board and board-to-wire interconnection in electronic systems. It is part of a precision connector series known for high reliability, consistent mechanical alignment, and excellent electrical performance. The component is commonly used in applications requiring modular connectivity, prototyping flexibility, and secure signal routing between printed circuit boards or peripheral interfaces. Its design supports repeated mating cycles while maintaining stable contact integrity, making it suitable for both development and production environments. Functional Description This component functions as a single-row header that provides a direct electrical interface between a printed circuit board and a mating connector or cable assembly. It enables straightforward signal or power routing through plated pins that are soldered into the PCB. The vertical orientation allows perpendicular mating, supporting compact and efficient board layouts. The connector is designed to ensure proper alignment and retention during mating, reducing the risk of intermittent connections. Electrical Characteristics The header supports low-voltage signal transmission and moderate current levels typical of board-level interconnects. It offers low contact resistance to maintain signal integrity and efficient current flow. The contact system is designed to provide consistent electrical performance across repeated insertions, ensuring reliability in both signal and power applications. Mechanical Characteristics The component features a robust insulating housing that maintains pin alignment and structural integrity during handling and operation. The contact pins are fabricated from conductive material and plated to enhance durability, conductivity, and مقاومت to corrosion. The through-hole mounting style provides strong mechanical anchoring to the printed circuit board, improving resistance to mechanical stress and vibration. The design supports reliable mating with compatible connectors and ensures long service life. Environmental Characteristics The TSW-106-07-G-S is constructed using materials that provide stable performance under typical environmental conditions encountered in electronic assemblies. It is designed to withstand standard temperature ranges and environmental stresses such as humidity and mechanical handling, maintaining electrical and mechanical reliability over time. Applications This header is widely used in embedded systems, industrial electronics, development platforms, communication equipment, and general-purpose PCB interconnect applications. It is especially suited for designs requiring modular connectivity, easy assembly, and dependable signal transfer. Summary The TSW-106-07-G-S from Samtec is a reliable through-hole header solution that combines mechanical durability with stable electrical performance. Its straightforward design, compatibility with standard interconnect systems, and suitability for a wide range of applications make it a common choice for board-level connectivity in modern electronic designs. #CommonPartsLibrary #Connector #Header #TSW

Bipolar (BJT) Transistor NPN 40V 600 mA 300MHz 300 mW Surface Mount SOT-23-3 (TO-236) The MMBT2222ALT3G is a NPN general-purpose bipolar junction transistor (BJT) manufactured by onsemi, designed in a SOT-23 surface-mount package. It is the SMD version of the well-known 2N2222A transistor family, used for switching and signal amplification in compact electronic circuits. It is widely used in industrial, automotive (AEC-Q101 qualified variants), and general embedded systems due to its reliability, small size, and good electrical performance. Key Features NPN General-Purpose Transistor Suitable for switching and low-power amplification Collector-Emitter Voltage (Vceo) Up to 40 V Collector Current Up to 600 mA Power Dissipation Around 225–300 mW (depending on package conditions) High Frequency Performance Transition frequency up to ~300 MHz DC Current Gain (hFE) Typically ~100 at moderate currents Low Saturation Voltage Efficient switching performance for digital circuits SOT-23 Surface-Mount Package Compact footprint for modern PCB designs Wide Temperature Range Typically -55°C to +150°C RoHS / Lead-Free Compliant Environmentally compliant manufacturing Typical Applications LED switching circuits Relay driver stages MCU signal interfacing (Arduino, ESP32, etc.) Small motor drivers General signal amplification Automotive and industrial control circuits Important Note MMBT2222ALT3G = SMD version (SOT-23) Equivalent to 2N2222A (TO-92 through-hole version) in function, but not in physical package. 2N2222A SOT-23 #commonpartslibrary #transistor #bjt

Connector Header Through Hole 6 position 0.100" (2.54mm) The TSW-103-07-G-D is a through-hole, dual-row (2×3) male pin header from the TSW series of Samtec. It is designed for board-to-board or cable-to-board interconnections, using a standard 2.54 mm (0.1″) pitch, making it widely compatible with common PCB layouts and prototyping systems. This connector features gold-plated square posts for reliable electrical contact and durability, and is commonly used in embedded systems, development boards, and general electronics applications. Key Features Connector Type: Male pin header (unshrouded) Number of Positions: 6 pins (2 rows × 3 pins) Pitch: 2.54 mm (0.100″) standard spacing Mounting Type: Through-hole soldering Contact System: 0.025″ (0.635 mm) square post Contact Material: Phosphor bronze with gold plating Orientation: Vertical (straight) Row Spacing: 2.54 mm Operating Temperature: −55 °C to +125 °C Insulator Material: PBT (UL94 V-0 rated) Typical Use: Board-to-board or cable interface AVR ISP 2x3 2.54mm header #commonpartslibrary #connector #header

Connector Header Through Hole 6 position 0.100" (2.54mm) The TSW-106-06-T-S is a through-hole, single-row, 6-position header from Samtec’s TSW series, designed for board-to-board or wire-to-board interconnections. It features a standard 2.54 mm (0.100") pitch and utilizes square posts for reliable mating with female sockets or IDC connectors. This header is commonly used in prototyping, development boards, and general-purpose PCB designs requiring robust and cost-effective interconnect solutions. Key Features Single-row vertical header 6 positions (1x6 configuration) Standard 2.54 mm pitch spacing Through-hole mounting for strong mechanical retention Tin-plated contacts for cost efficiency Square post design for reliable electrical contact Compatible with a wide range of mating connectors Electrical Characteristics Current Rating: ~3 A per contact (typical, depending on application) Contact Resistance: ≤ 10 mΩ (initial) Insulation Resistance: ≥ 1000 MΩ Withstanding Voltage: ~500 VAC Mechanical Characteristics Number of Positions: 6 Rows: 1 Pitch: 2.54 mm (0.100") Mounting Type: Through-hole Contact Type: Male pin (square post) Post Length Style: Standard (06) Tail Length: ~3.18 mm (0.125") typical Mating Pin Size: ~0.64 mm square Material and Plating Contact Material: Phosphor Bronze Plating: Tin over Nickel Insulator Material: Glass-filled thermoplastic (UL94 V-0 rated) Environmental Specifications Operating Temperature Range: -55°C to +105°C RoHS Compliant: Yes Lead-Free: Yes Applications PCB prototyping and development boards Embedded systems and microcontroller headers Board-to-board connections General-purpose signal connections Packaging Typically supplied in bulk or tube packaging depending on order quantity #commonpartslibrary #connector #header

Connector Header Through Hole 12 position 0.100" (2.54mm) pin header 1x12 2.54mm The TSW-112-07-G-S is a single-row, 12-position, 2.54 mm pitch through-hole male pin header from Samtec’s TSW series. It is designed for reliable board-to-board or wire-to-board connections in prototyping and production environments. Featuring gold-plated phosphor bronze contacts and a durable PBT housing, this connector ensures excellent electrical performance, corrosion resistance, and mechanical durability. It is commonly used in embedded systems, development boards, and general-purpose PCB interconnections. Product Type Pin Header / Pin Strip Number of Positions 12 Number of Rows 1 Pitch 2.54 mm (0.1 in) Mounting Style Through Hole Mounting Angle Straight Termination Style Solder Pin Contact Type Male Pin Contact Material Phosphor Bronze Contact Plating Gold Housing Material Polybutylene Terephthalate (PBT) Housing Color Black Flammability Rating UL 94 V-0 Current Rating 4.3 A to 6.3 A (application dependent) Voltage Rating Up to 550 VAC Packaging Bulk Country of Origin Vietnam RoHS Compliance Compliant #commonpartslibrary #connector #header

Connector Header Through Hole 22 position 0.100" (2.54mm) PinHeader_1x22_P2.54mm_Vertical General Description The TSW-122-07-G-S is a through-hole vertical pin header manufactured by Samtec. It is part of the TSW series, designed for board-to-board or wire-to-board interconnections. This component features a single-row configuration with standard 2.54 mm pitch spacing, making it widely compatible with common prototyping and production PCB designs. It is commonly used in embedded systems, development boards, and general-purpose electronic assemblies requiring reliable and cost-effective connectivity. Key Features Single-row vertical pin header Through-hole mounting style Standard 2.54 mm pitch spacing Tin-plated contacts for reliable electrical connection Black thermoplastic insulator housing Designed for board-to-board or cable interfacing Compatible with standard mating connectors and sockets Electrical Characteristics Current rating suitable for signal-level and low-power applications Contact resistance designed for stable electrical performance Insulation resistance suitable for typical PCB environments Mechanical Characteristics Number of positions: twenty-two Row configuration: single row Mounting type: through-hole Orientation: vertical Contact material: copper alloy Contact plating: tin Housing material: high-temperature thermoplastic Environmental Characteristics Operating temperature range suitable for industrial and commercial electronics RoHS compliant Designed for durability under normal handling and soldering conditions Applications Microcontroller and development boards Prototyping platforms Board-to-board interconnections Embedded systems General electronic assemblies #commonpartslibrary #connector #header

Jack Modular Connector 6p6c (RJ11, RJ12, RJ14, RJ25) 90° Angle (Right) Shielded Cat5 The 615006141121 is a board-to-board or wire-to-board connector component designed for reliable electrical interconnection in electronic assemblies. It is typically used in compact PCB layouts where secure mating, consistent contact performance, and durability are required. This connector is suited for applications in consumer electronics, industrial equipment, and embedded systems, offering dependable signal and power transmission. Key Features: Compact connector design for space-constrained applications High-reliability contact interface Designed for PCB mounting ապահով secure mating and retention Suitable for signal and low-power connections Mechanical Characteristics: Mounting Type: Through-hole or surface-mount (depending on variant) Orientation: Vertical or right-angle configuration Contact Configuration: Multi-position connector Pitch: Standard fine-pitch spacing typical for board-level connectors Housing Material: High-temperature thermoplastic Contact Material: Copper alloy with plated finish Electrical Characteristics: Contact Resistance: Low contact resistance for stable signal integrity Insulation Resistance: High insulation resistance Rated Voltage: Suitable for low-voltage applications Current Rating: Designed for signal-level or moderate current carrying Environmental Characteristics: Operating Temperature Range: Suitable for standard industrial temperature ranges RoHS Compliance: Yes Durability: Designed for multiple mating cycles Applications: Embedded systems Consumer electronics Industrial control boards Communication devices PCB interconnect solutions #commonpartslibrary #connector #jackmodular

Connector Header Through Hole 12 position 0.100" (2.54mm) The TSW-106-07-F-D is a double-row, through-hole vertical header from Samtec’s TSW series, designed for board-to-board or wire-to-board interconnections. It features a standard 2.54 mm pitch with 12 total contacts arranged in two rows of six positions. This connector is commonly used in prototyping, embedded systems, and general-purpose PCB applications where reliable and cost-effective interconnect solutions are required. Applications PCB prototyping Embedded systems Mezzanine board connections Development boards General-purpose interconnects Mating Compatibility Compatible with standard 2.54 mm pitch female headers and sockets Works with IDC connectors and jumper wires #commonpartslibrary #connector #header

Connector Header Through Hole 10 position 0.100" (2.54mm) The TSW-105-07-G-D is part of the Samtec TSW series, which consists of 0.100″ (2.54 mm) pitch PCB header strips. It is a dual-row, 10-position (2×5) male pin header intended for through-hole mounting on printed circuit boards. This connector provides a simple and reliable way to connect PCBs or interface with cables and other connectors (e.g., female sockets or IDC connectors). Key Features Connector Type: Rectangular header (male pin) Mounting Type: Through-hole (THT) Pitch: 2.54 mm (0.100″ standard spacing) Number of Positions: 10 pins Rows: Dual-row (2×5 configuration) Contact Style: 0.025″ (0.635 mm) square posts Orientation: Vertical (straight header) Plating: Gold (indicated by “G”) for reliable contact Electrical & Mechanical Highlights Current Rating: up to ~6.3 A per contact (series typical) Voltage Rating: up to ~400–550 VAC Operating Temperature: approx. -55 °C to +125 °C High durability: supports multiple mating cycles (extended-life design) Typical Applications Microcontroller and development boards Board-to-board connections Prototyping systems (breadboard-compatible headers) Industrial and embedded electronics Cable-to-board interfaces #CommonPartsLibrary #Connector #Header #TSW

Dip Switch SPST 2 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC The 218-2LPSTJ is a two-position pluggable terminal block connector designed for secure wire-to-board connections in industrial and commercial electronic applications. It features a screw-clamp termination mechanism, allowing reliable and reusable connections for solid or stranded wires. The connector is typically used in power distribution, control systems, and signal wiring where ease of maintenance and field wiring is required. Key Features Pluggable terminal block, two positions Screw-clamp wire termination for secure connection Standard pitch suitable for common PCB layouts Removable plug for easy installation and maintenance Designed for solid and stranded wire compatibility High reliability for industrial environments Mechanical Specifications Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole (header) with mating plug Wire Entry: Side entry Wire Gauge Range: Typically 24 AWG to 12 AWG (manufacturer dependent) Housing Material: High-temperature thermoplastic Color: Typically green Electrical Specifications Rated Voltage: Up to 300 V (UL rating typical) Rated Current: Up to 10–15 A (depending on wire size and conditions) Contact Resistance: Low resistance, suitable for power and signal transmission Insulation Resistance: High insulation resistance under standard conditions Environmental Specifications Operating Temperature Range: −40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Power supply connections Industrial control systems HVAC equipment Automation and instrumentation PCB-based terminal interfaces Mating / Compatibility Compatible with corresponding 2-position pluggable terminal block headers with 5.08 mm pitch Designed for repeated mating cycles without degradation #commonpartslibrary #switch #dip #spst

680 kOhms ±5% 0.25W, 1/4W Through Hole Resistor Axial Automotive AEC-Q200 Carbon Film The CFR-25JB-52-680K is a carbon film through-hole resistor designed for general-purpose electronic applications requiring stable resistance characteristics, reliable long-term performance, and cost-effective implementation. This resistor is commonly used in signal conditioning, voltage division, pull-up and pull-down networks, biasing circuits, and low-power analog or digital systems. Its axial leaded construction supports automated insertion and conventional through-hole assembly methods, making it suitable for consumer electronics, industrial controls, instrumentation, and embedded systems. The device utilizes carbon film resistive technology to provide dependable electrical performance with moderate noise characteristics and good environmental stability. The flame-retardant coating enhances mechanical durability and improves resistance against moisture and environmental exposure. The component is optimized for standard operating environments where compact size, stable operation, and economical design are required. Electrical Characteristics Resistance Value: 680 kΩ Resistance Tolerance: ±5% Resistor Technology: Carbon Film Rated Power Dissipation: 1/4 W Maximum Working Voltage: 250 V Maximum Overload Voltage: 500 V Temperature Coefficient: ±350 ppm/°C Insulation Resistance: High reliability insulation structure suitable for general electronic equipment Mechanical Characteristics Package Type: Axial Through-Hole Mounting Style: Through Hole Body Style: Cylindrical Flame-Retardant Coated Body Lead Material: Tin-Plated Copper Lead Configuration: Axial Leads for PCB insertion Environmental Characteristics Operating Temperature Range: −55°C to +155°C Moisture Resistance: Suitable for standard humidity environments Flame Resistance: Flame-retardant protective coating compliant with general safety requirements Applications Signal Conditioning Circuits Voltage Divider Networks Pull-Up and Pull-Down Resistors Industrial Control Electronics Consumer Electronic Products General Analog and Digital Circuitry Embedded Systems and Microcontroller Interfaces #commonpartslibrary #passivecomponents #resistor #carbonfilm #throughhole #axialresistor #powermanagement #analog #digital #industrialelectronics

Fuse Holder 20 A 250V 1 Circuit Cartridge Through Hole The 696309001002 is a vertical PCB terminal block connector manufactured by Wurth Elektronik. It is designed for reliable wire-to-board connections in industrial control, power distribution, embedded electronics, and automation systems. The connector features a compact through-hole design with screw clamp wire termination for secure electrical and mechanical contact. Its modular construction supports easy field wiring and dependable long-term operation in demanding environments. Engineering Specification Manufacturer: Wurth Elektronik Manufacturer Part Number: 696309001002 Product Type: PCB Terminal Block Connector Style: Wire-to-Board Mounting Type: Through Hole Orientation: Vertical Number of Positions: 2 Pitch: 5.00 mm Wire Termination Method: Screw Clamp Wire Entry Direction: Top Entry Contact Material: Copper Alloy Contact Plating: Tin Housing Material: High Temperature Thermoplastic Housing Color: Green Rated Voltage: 300 V Rated Current: 16 A Supported Wire Gauge: 24 AWG to 12 AWG Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94 V-0 RoHS Compliance: Yes Applications: Industrial controls, power interfaces, embedded systems, automation equipment, power supply connections, signal and low-voltage wiring systems. #commonpartslibrary #circuitprotection #fuseholder

Connector Header Through Hole 13 position 0.100" (2.54mm) pin header 1x13 2.54mm The TSW-113-07-F-S is a surface-mount, dual-row header designed for reliable board-to-board or board-to-wire connections in compact electronic assemblies. It is commonly used in applications where space efficiency, mechanical stability, and consistent electrical performance are required. The component features a low-profile design suited for automated assembly processes and is compatible with standard reflow soldering techniques. Configuration and Design This connector is configured as a dual-row header with a fine pitch layout, enabling high-density interconnections while maintaining signal integrity. The surface-mount termination style allows for direct placement onto printed circuit boards without the need for through-hole mounting, supporting modern manufacturing practices and reducing assembly time. Material and Construction The housing is typically constructed from a high-temperature thermoplastic material suitable for reflow soldering environments. Contacts are manufactured from a conductive alloy and are plated to enhance durability, corrosion resistance, and electrical conductivity. The plating material is selected to ensure long-term reliability under normal operating conditions. Electrical Characteristics The connector supports low-voltage signal transmission and is designed to maintain consistent contact resistance throughout its service life. It is suitable for general-purpose electronic applications where stable electrical connections are essential. Mechanical Properties The component is engineered to provide secure mating retention and resistance to mechanical stress during handling and operation. Its surface-mount design contributes to improved alignment and stability on the PCB, especially in high-vibration environments when properly soldered. Environmental Considerations The device is capable of operating within standard commercial temperature ranges and is designed to withstand typical environmental conditions encountered in electronic assemblies. Materials used are compliant with common industry standards for environmental safety and manufacturing. #commonpartslibrary #connector #header

Connector Header Through Hole 26 position 0.100" (2.54mm) The 827881-1 is a TE Connectivity board-to-board / wire-to-board connector component (AMP series header/socket depending on configuration) designed for reliable electrical interconnection in compact electronic assemblies. It is commonly used in industrial, automotive, and consumer electronic applications where stable signal or power transmission between PCBs or wiring harnesses is required. Key Features Manufacturer: TE Connectivity (AMP) Connector Type: PCB header / receptacle (depends on mating part) Contact Arrangement: Multi-position (varies by variant) Mounting Style: Through-hole or board mount (variant dependent) Contact Material: High-reliability copper alloy with plating for corrosion resistance Current Rating: Suitable for signal-level and moderate power applications (varies by configuration) Voltage Rating: Designed for standard low-voltage electronic systems Durability: High mating cycle life for repeated connections Polarization: Mechanical keying to prevent mismating Locking Feature: Secure retention for vibration resistance Application Areas: Industrial control boards Automotive electronics Communication modules Embedded systems and PCB interconnects #CommonPartsLibrary #Connector

Connector Header Through Hole 32 position 0.100" (2.54mm) PCB Header, 2x16, Straight, Gold, AMPMODU Mod II Series | TE Connectivity 1-826656-6 2x16 Pin Header 2.54 mm Through-Hole

DIODE GP 75V 150mA SOD-123 The 1N4148 (SOD-123) is a silicon epitaxial planar switching diode designed for fast switching applications. It is widely used in surface-mount designs as the SMD version of the classic 1N4148 (DO-35 through-hole type). It is mainly used for low-current, high-speed switching circuits, such as signal clamping, protection, logic circuits, and general rectification in small electronics. Key Features Fast switching speed (reverse recovery time typically ≤ 4 ns) Reverse voltage up to 100 V (peak) Average forward current: ~150 mA Compact SOD-123 surface-mount package (2-pin SMD) Low power dissipation (~400–500 mW depending on manufacturer) Low reverse leakage current (very small, µA or less) Low junction capacitance (~2–4 pF typical) for high-speed operation Wide operating temperature range: -55°C to +150°C Suitable for automatic PCB assembly (SMT reflow compatible) #CommonPartsLibrary #Diode

CONN SOCKET 4POS 2.54mm SINGLE ROW TH This connector consists of a single row of 4 electrical pins spaced 2.54 mm apart. It is typically available as a male pin header, female header, or wafer connector depending on the application. The part is commonly used for power, signal, UART, GPIO, sensor, and programming connections in embedded systems and prototyping. Key Features 2.54 mm pitch spacing Industry-standard spacing compatible with breadboards and jumper wires 1x4 configuration Single row with 4 contacts/pins Compact PCB connection solution Suitable for board-to-board or wire-to-board applications Easy solder mounting Typically through-hole (THT), though SMT variants may exist Wide compatibility Works with Arduino, Raspberry Pi modules, sensors, and development boards Durable metal contacts Usually tin- or gold-plated for reliable electrical connection Multiple orientations available Straight vertical or right-angle versions Low-cost and widely available Commonly used in consumer electronics and DIY projects Common Applications GPIO and sensor connections UART / serial interfaces Power input/output headers Embedded system prototyping Module interconnections Debug and programming interfaces #CommonPartsLibrary #Connector