Kinetis KL16 series, 48-MHz/32-bit ARM Cortex-M0+, 128 kB flash, 16 kB SRAM, I²S, TSI, LQFP-64 Kinetis KL16 ARM Cortex M0+ LQFP*10x10mm*P0.5mm*

Kinetis KL16 series, 48-MHz/32-bit ARM Cortex-M0+, 128 kB flash, 16 kB SRAM, I²S, TSI, QFN-48 Kinetis KL16 ARM Cortex M0+ QFN*7x7mm*P0.5mm*

Kinetis KL16 series, 48-MHz/32-bit ARM Cortex-M0+, 128 kB flash, 16 kB SRAM, I²S, TSI, QFN-32 Kinetis KL16 ARM Cortex M0+ QFN*5x5mm*P0.5mm*

60 Hz ~ 15 kHz Digital, I²S Microphone MEMS (Silicon) 1.62 V ~ 3.63 V #I2S #MEMS #Part

TDK InvenSense MEMS Microphone, 24-bit I2S, 65 dBA SNR, LGA-6 microphone MEMS 24bit I2S ICS-43434 TDK InvenSense InvenSense*ICS*43434*

50 Hz ~ 20 kHz Digital, I2S Microphone MEMS (Silicon) 1.62 V ~ 3.63 V Omnidirectional (-26dB ±1dB @ 94dB SPL) Solder Pads I2S or TDM digital MEMS microphone I2S / TDM digital MEMS microphone

Tiny, Low-Cost, PCM Class D Amplifier with Class AB Performance The MAX98357AETE+T is a highly integrated digital input Class-D audio amplifier designed to convert digital audio streams directly into high-efficiency speaker output signals. It features an integrated digital-to-analog conversion stage and Class-D output driver, eliminating the need for an external DAC and significantly simplifying audio system design. The device accepts digital audio data through a standard I²S interface and delivers high-quality audio output suitable for portable electronics, smart speakers, embedded systems, Internet of Things devices, multimedia products, and consumer audio equipment. Its high-efficiency architecture minimizes power dissipation while maintaining excellent audio performance, making it particularly suitable for battery-powered applications. The MAX98357AETE+T incorporates advanced audio processing capabilities, low electromagnetic interference characteristics, and integrated protection features to ensure reliable operation in compact embedded audio designs. Features Digital input Class-D audio amplifier Integrated digital-to-analog conversion functionality Direct I²S audio interface support High-efficiency power amplification architecture Filterless output design Compact surface-mount package Low electromagnetic interference operation Integrated click-and-pop suppression Low power consumption High audio fidelity performance Simplified external component requirements Integrated thermal protection Short-circuit protection capability Suitable for mono speaker applications Optimized for embedded audio systems Electrical Characteristics Digital audio input architecture Class-D switching amplifier topology High-efficiency power conversion Low distortion audio reproduction Wide operating supply range Low standby power consumption Direct speaker drive capability Integrated audio signal processing functions Applications Smart speakers Embedded audio systems Internet of Things devices Portable electronics Voice-enabled products Multimedia equipment Consumer audio devices Wireless audio products Home automation systems Educational and development platforms Battery-powered audio applications Human-machine interface systems Package Information TQFN surface-mount package Compact footprint for space-constrained designs Suitable for automated PCB assembly Thermally optimized package construction High-density electronic product integration #commonpartslibrary #integratedcircuit #audio #audioamplifier #classd amplifier #digitalaudio #i2s #dac #embeddedaudio #consumerelectronics #iot #multimedia #signalprocessing #powermanagement #maximintegrated #analogdevices #electronicsdesign #audioelectronics #speakerdriver #embeddedsystems

IC RF TXRX+MCU BLE 48QFN 64 MHz Cortex-M4 with FPU 512/64 KB Flash 2.4 GHz Transceiver 2 Mbps, 1 Mbps Bluetooth Low Energy Bluetooth mesh +4 dBm TX power 128-bit AES UART, SPI, TWI, PDM, I2S PWM 12-bit ADC NFC-A #microcontrollers #Nordic #commonpartslibrary

This is a Kitchen Assistant Module that runs on an ESP32 that connects to the network. The board has a microphone and bazer for communication and a display #referenceDesign #edge-computing #reusable #module #edge-computing #edgeComputing #espressif #sublayout #esp32 #iot #i2s

Audio D/A Converter ICs SABRE 8 Channel DAC with Line Drivers, 5mmx5mm, 40-QFN The ES9081Q is a high-performance stereo digital-to-analog converter developed by ESS Technology and based on the SABRE audio DAC architecture. It is designed for premium audio applications requiring ultra-low distortion, high dynamic range, and high-resolution audio playback. The device integrates ESS HyperStream architecture and advanced jitter elimination technology to deliver accurate and transparent audio reproduction across a wide range of consumer and professional audio systems. The ES9081Q supports high-resolution PCM and DSD audio formats, making it suitable for portable audio devices, USB DACs, home audio systems, automotive infotainment platforms, digital media players, and professional audio equipment. The integrated digital processing and low-noise analog output stages simplify system design while maintaining excellent audio fidelity. The device supports multiple digital audio interfaces and provides flexible clocking configurations for compatibility with modern audio processors and SoCs. Its low power consumption and compact package make it suitable for space-constrained and thermally sensitive designs. Key Features SABRE HyperStream DAC architecture Integrated Time Domain Jitter Eliminator Stereo audio DAC implementation High dynamic range audio performance Ultra-low total harmonic distortion plus noise Support for high-resolution PCM audio streams Support for native DSD audio playback Multiple digital audio input interface support Integrated digital interpolation filters Configurable audio processing functions Low-noise analog output stage Low power consumption operation Flexible master clock configurations Hardware and software control support Compact surface-mount package Electrical Characteristics Wide digital core supply voltage support Separate analog and digital power domains Low standby power consumption High signal-to-noise ratio performance Low output noise floor Excellent channel separation characteristics Precision clock synchronization capability Audio Performance High-resolution audio conversion capability Support for elevated PCM sampling frequencies Native DSD decoding support Low latency audio path High linearity across audio bandwidth Low jitter sensitivity High-fidelity stereo playback performance Digital Interface Support I2S audio interface compatibility Left-justified digital audio format support Multiple word length compatibility Master and slave clock operation modes Serial control interface support Package Information Surface-mount QFN package Compact footprint for embedded audio applications RoHS compliant package option Optimized thermal performance package design Typical Applications High-resolution USB DACs Portable digital audio players Wireless audio receivers Home theater systems Automotive infotainment systems Professional audio interfaces Premium headphone amplifiers Network audio streaming devices #commonpartslibrary #integratedcircuit #audio #dac #stereodac #highresolutionaudio #ess #sabredac #consumeraudio #professionalaudio

SM261S4030H0R is an omnidirectional, Top‐ported, I 2 S digital output MEMS microphone. It has high performance and reliability.    MSM261S4030H0R is available in a 4 mm × 3 mm × 1.0 mm metal can LGA package. It is SMT compatible with no sensitivity degradation Cost effective Low Power mode Digital I2S output Compatible with Sn/Pb and Pb‐free solder processes RoHS/Halogen free compliant Sensitivity Matching within +/‐1dB #CommonPartsLibrary #MEMS #Microphone #Vibration-motor

20.5dBm ESP32-C3 Chip 2.4GHz VFQFN-32-EP WiFi Modules ROHS RF Transceiver ICs ESP32-C3-WROOM-02-N4 BULETM-SMD_ESPRESSIF_ESP32-C3-WROOM-02-N4-4MB LCSC Part Number: C2934560 Espressif ESP32-C3-WROOM-02 wireless MCU module, based on ESP32-C3 32-bit RISC-V single-core processor up to 160MHz, supports 2.4GHz Wi-Fi 802.11b/g/n and Bluetooth LE 5.0 with Bluetooth mesh, 4MB or 8MB SPI flash options, 384KB ROM, 400KB SRAM and 8KB RTC SRAM, up to 15 GPIOs, SPI, UART, I2C, I2S, LED PWM, USB Serial/JTAG, ADC, timers and watchdogs, integrated 40MHz crystal oscillator, 3.0V to 3.6V supply voltage, on-board PCB antenna, RoHS/REACH compliant, 18.0 x 20.0 x 3.2mm module size. Search Keywords: ESP32-C3-WROOM-02, ESP32-C3-WROOM-02-N4, ESP32-C3-WROOM-02-H4, ESP32-C3-WROOM-02-N8, Espressif ESP32-C3-WROOM-02, ESP32-C3 WiFi Bluetooth module, ESP32-C3 RISC-V module, WiFi BLE 5 module, 802.11bgn module, Bluetooth mesh module, ESP32-C3 PCB antenna module, ESP32-C3 4MB flash module, ESP32-C3 8MB flash module Hashtags: #ESP32C3WROOM02 #ESP32C3WROOM02N4 #ESP32C3WROOM02H4 #ESP32C3WROOM02N8 #EspressifESP32C3 #ESP32C3 #WiFiBluetoothModule #WiFiModule #BluetoothLEModule #BLE5Module #RISCVMCU #IoTModule #PCBantenna #80211bgn

ARM Microcontrollers - MCU ARM M4 1024 FLASH 168 Mhz 192kB SRAM 100-LQFP (14x14) Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB Flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1 Mbyte of Flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM – 512 bytes of OTP memory – Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories • LCD parallel interface, 8080/6800 modes • Clock, reset and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power operation – Sleep, Stop and Standby modes –VBAT supply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™ • Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os • Up to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock – 2 × CAN interfaces (2.0B Active) – SDIO interface • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII #CommonPartsLibrary #IntegratedCircuit #Microcontroller #STM32F407

ARM® Cortex®-M4 series Microcontroller IC 32-Bit Single-Core 168MHz 1MB (1M x 8) FLASH 64-LQFP (10x10) Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces, and camera Includes ST state-of-the-art patented technology • Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions • Memories – Up to 1 Mbyte of flash memory – Up to 192+4 Kbytes of SRAM including 64- Kbyte of CCM (core coupled memory) data RAM – 512 bytes of OTP memory – Flexible static memory controller supporting CompactFlash™, SRAM, PSRAM, NOR and NAND memories • LCD parallel interface, 8080/6800 modes • Clock, reset, and supply management – 1.8 V to 3.6 V application supply and I/Os – POR, PDR, PVD and BOR – 4-to-26 MHz crystal oscillator – Internal 16 MHz factory-trimmed RC (1% accuracy) – 32 kHz oscillator for RTC with calibration – Internal 32 kHz RC with calibration • Low-power operation – Sleep, Stop, and Standby modes –VBAT supply for RTC, 20×32-bit backup registers + optional 4 KB backup SRAM • 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode • 2×12-bit D/A converters • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support • Up to 17 timers: up to twelve 16-bit and two 32- bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input • Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M4 Embedded Trace Macrocell™ • Up to 140 I/O ports with interrupt capability – Up to 136 fast I/Os up to 84 MHz – Up to 138 5 V-tolerant I/Os • Up to 15 communication interfaces – Up to 3 × I2C interfaces (SMBus/PMBus) – Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control) – Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock – 2 × CAN interfaces (2.0B Active) – SDIO interface • Advanced connectivity – USB 2.0 full-speed device/host/OTG controller with on-chip PHY – USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI – 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII #commonpartslibrary #integratedcircuit #microcontroller

The ESP32-C3-DEVKIT-RUST-1 from Espressif Systems is a development platform designed for RF, RFID, and wireless applications. Built around the ESP32-C3-MINI IC, it supports Bluetooth (BLE) and IEEE 802.11 b/g/n Wi-Fi at 2.4GHz, providing reliable connectivity for wireless communication projects. Powered by a 32-bit RISC-V single-core processor running up to 160MHz, the board features 384KB ROM, 400KB SRAM, and 22 programmable GPIO pins for extensive interfacing. It also includes 3 x SPI, 2 x UART, 1 x I2C, 1 x I2S, RMT (Remote Control Peripheral), LED PWM, and a General DMA controller, making it ideal for developing Bluetooth and Wi-Fi-enabled devices and exploring the ESP32-C3-MINI's capabilities in IoT projects.

The ESP32-DEVKITC-VE evaluation kit from Espressif Systems is a high-performance development platform for RF, RFID, and wireless applications. It features the ESP32-WROVER-E with embedded Xtensa dual-core 32-bit LX6 microprocessor running up to 240 MHz, with 8MB Flash and 8MB PSRAM for efficient data processing. This board supports Wi-Fi 802.11 b/g/n and Bluetooth® Smart Ready 4.x (BLE) connectivity at 2.4GHz, offering wireless communication options. With 448KB ROM, 520KB SRAM, and 16KB SRAM in RTC, it provides ample memory for complex applications. It includes up to 24 GPIOs, SD card, UART, SPI, SDIO, I2C, LED and motor PWM, I2S, IR, pulse counter, capacitive touch sensor, ADC, DAC, and TWAI® (compatible with ISO 11898-1/CAN 2.0) #commonpartslibrary #ESP32-WROVER-E #evaluationboard

ADC, Audio 768k I²C, SPI 24-WQFN (4x4) The TLV320ADC3140 is a Burr-Brown™ highperformance, audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to four analog channels or eight digital channels for the pulse density modulation (PDM) microphone input. The device supports line and microphone inputs, and allows for both single-ended and differential input configurations. The device integrates programable channel gain, digital volume control, a programmable microphone bias voltage, a phase-locked loop (PLL), a programmable high-pass filter (HPF), biquad filters, low-latency filter modes, and allows for sample rates up to 768 kHz. The device supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with either the I2C or SPI interface. These integrated high-performance features, along with the ability to be powered from a single-supply of 3.3 V or 1.8 V, make the device an excellent choice for space-constrained audio systems in far-field microphone recording applications. #commonpartslibrary #integratedcircuit #adc #audio

ARM® Cortex®-M0+ - Microcontroller IC 32-Bit Dual-Core 133MHz External Program Memory 56-QFN (7x7) Part Description The RP2040 by Raspberry Pi is an ARM® Cortex®-M0+ microcontroller featuring a 32-Bit Dual-Core processor capable of running at 133MHz. It supports external program memory and integrates a comprehensive set of peripherals including I2C, IrDA, QSPI, SPI, UART/USART, USB, and more. This IC is packaged in a 56-pin QFN (7x7) with exposed pads, making it ideal for surface-mount applications and high-density designs. Additional features include integrated data converters (4x12b SAR A/D), 264K x 8 RAM, and robust connectivity along with peripherals like brown-out detection, DMA, I2S, LCD control, POR, PWM, and Watchdog Timer. Note that the image is a representation only; exact specifications must be confirmed via the product datasheet. Manufacturer Lead Time: 8 Weeks Packaging Options: Tape & Reel (TR) Cut Tape (CT) Digi-Reel® Hashtags #RP2040 #ARM #CortexM0Plus #DualCore #133MHz #Microcontroller #Embedded #RaspberryPi #56QFN #SurfaceMount #ExternalMemory #TapeAndReel #CutTape #DigiReel

WiFi 802.11a/b/g/n, Bluetooth v5.0 Transceiver Module 2.4GHz PCB Trace The ESP32-S3-WROOM-1-N8R2 is a compact, low-power Wi-Fi and Bluetooth® Low Energy (BLE) module developed by Espressif Systems. It is based on the ESP32-S3 system-on-chip (SoC), which integrates a dual-core Xtensa® LX7 processor optimized for high performance and edge AI processing. This module includes 8 MB of external SPI flash memory and 2 MB of PSRAM, enabling efficient handling of memory-intensive applications such as graphical interfaces, buffering, and embedded machine learning workloads. Designed for flexibility and scalability, the module integrates RF components, power management, and a wide range of peripherals into a surface-mount package suitable for IoT, industrial, and consumer electronics applications. Key Features Dual-core Xtensa® LX7 processor operating up to 240 MHz Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) Bluetooth 5 Low Energy support Embedded 8 MB SPI flash memory Integrated 2 MB PSRAM AI acceleration through vector instruction support USB OTG (full-speed) capability Multiple low-power operating modes Built-in hardware security features Extensive peripheral interface support Functional Overview The module consists of several integrated subsystems, including a dual-core processing unit, memory subsystem (flash and PSRAM), RF subsystem for wireless communication, peripheral interface controllers, power management circuitry, and a hardware-based security engine. Electrical Characteristics Operating voltage range: 3.0 V to 3.6 V (typical 3.3 V) Operating temperature range: -40°C to +85°C RF operating frequency: 2.4 GHz Current consumption varies depending on operating mode, ranging from microamp levels in deep sleep to hundreds of milliamps during active transmission Processor and Memory The module features a dual-core Xtensa® LX7 CPU capable of running at frequencies up to 240 MHz. It includes approximately 512 KB of internal SRAM, supplemented by 8 MB of external flash memory and 2 MB of PSRAM for extended data storage and processing. Wireless Connectivity The ESP32-S3-WROOM-1-N8R2 supports Wi-Fi communication compliant with 802.11 b/g/n standards in the 2.4 GHz band. It also supports Bluetooth 5 Low Energy for short-range wireless communication. The module includes an integrated PCB antenna and supports RF output power up to approximately +20 dBm. Peripheral Interfaces The module provides a wide range of interfaces, including general-purpose input/output (GPIO) pins, SPI, I2C, UART, and I2S for audio applications. It also supports PWM for LED control, a 12-bit analog-to-digital converter (ADC), and USB OTG functionality. Pin functions are multiplexed to maximize flexibility. Power Management Power efficiency is achieved through multiple operating modes, including active mode, modem sleep, light sleep, and deep sleep. The module includes an RTC subsystem for low-power timekeeping and supports dynamic frequency scaling to optimize performance and energy consumption. Security Features The module incorporates several hardware-based security mechanisms, including secure boot, flash encryption, and digital signature verification. It also includes a hardware random number generator and cryptographic accelerators supporting AES, SHA, RSA, and ECC algorithms. Mechanical Characteristics The module is designed for surface-mount integration and measures approximately 18 mm by 25.5 mm. It includes an onboard PCB antenna and is suitable for compact embedded designs. Pin Configuration Overview GPIO pins are multiplexed to support various peripheral functions such as analog inputs, communication interfaces, and control signals. Dedicated pins are provided for power supply, module enable, and boot configuration. Typical Applications Internet of Things (IoT) devices Smart home systems Industrial automation and monitoring Edge AI and machine learning applications Wearable electronics Audio and multimedia systems USB-enabled embedded devices Compliance The module is designed to meet Wi-Fi and Bluetooth standards and is compliant with RoHS requirements. Certification such as FCC or CE may apply depending on the specific module variant and deployment. Ordering Information The ESP32-S3-WROOM-1-N8R2 variant includes 8 MB of flash memory and 2 MB of PSRAM. #commonpartslibrary #integratedcircuit #transceiver #wireless #rf