Digital To Analog Converters (DACs) PCM5122PWR TSSOP-28_L9.8-W6.6-P0.65-BL LCSC Part Number: C962071 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器) Texas Instruments PCM5121/PCM5122 stereo audio DAC, 2VRMS DirectPath ground-centered output, 112dB/106dB dynamic range depending on variant, supports 16/20/24/32-bit audio data and up to 384kHz PCM sampling rate, I2S, left-justified, right-justified, TDM and DSP audio formats, integrated audio processing with EQ, filtering and dynamic range control, integrated charge pump, PLL and mute system, SPI or I2C control, 1.8V or 3.3V digital input support, single-supply operation, available in TSSOP-28 package, suitable for AV receivers, DVD/BD players, HDTV receivers and high-quality 2VRMS audio output applications. Search Keywords: PCM5121, PCM5122, Texas Instruments PCM5121, Texas Instruments PCM5122, TI PCM5121, TI PCM5122, PCM512x DAC, PCM5121 audio DAC, PCM5122 audio DAC, stereo audio DAC, 2VRMS audio DAC, DirectPath DAC, 32-bit audio DAC, 384kHz PCM DAC, I2S DAC, TDM audio DAC, DAC with charge pump, DAC with PLL, PCM5121 TSSOP-28, PCM5122 TSSOP-28, PCM5121 datasheet, PCM5122 datasheet Hashtags: #PCM5121 #PCM5122 #PCM512x #TexasInstrumentsPCM5121 #TexasInstrumentsPCM5122 #TIAudioDAC #AudioDAC #StereoDAC #DirectPathDAC #2VRMSDAC #32BitDAC #384kHzDAC #I2SDAC #TDMDAC #PCMInterfaceDAC #DACWithPLL #DACWithChargePump #TSSOP28

RF IC Synthesizer, VCO VSAT 7.3GHz ~ 14.6GHz SPI Interface 48-LGA (7x7) The ADF5611 allows implementation of fractional-N or integer-N phase-locked loop (PLL) frequency synthesizers when used with an external loop filter and an external reference source. The wideband microwave voltage controlled oscillator (VCO) design permits frequency operation from 7300MHz to 14,600MHz at a single RF output. A series of frequency dividers with a differential frequency output allows operation from 57MHz to 14,600MHz. Analog and digital power supplies for the PLL circuitry range from 3.15V to 3.45V, and the VCO supplies are between 4.75V and 5.25V. The ADF5611 has an integrated VCO with a fundamental frequency of 3650MHz to 7300MHz. These frequencies are internally doubled and routed to the RFOUT pin. An additional differential output allows the doubled VCO frequency to be divided by 1, 2, 4, 8, 16, 32, 64, or 128, allowing the user to generate RF output frequencies as low as 57MHz. A simple 3- or 4-wire serial port interface (SPI) provides control of all on-chip registers. To conserve power, this divider block can be disabled when not needed through the SPI. Likewise, the output power for both the single-ended output and the differential output are programmable. The integrated phase detector and Δ-Σ modulator, capable of operating at up to 100MHz, permit wide loop bandwidths and fast frequency tuning with a typical spurious level of −105dBc. With a VCO open-loop phase noise at an 100kHz offset from −115dBc/Hz at a 7.3GHz RFOUT to −109dBc/Hz at a 14.6GHz RFOUT, the ADF5611 is equipped to minimize blocker effects and to improve receiver sensitivity and transmitter spectral purity. The low phase noise floor eliminates any contribution to modulator and mixer noise floor in transmitter applications. ► RFOUT frequency range: 7300MHz to 14,600MHz ► PDIV_OUT and NDIV_OUT frequency range: 57MHz to 14,600MHz ► Fractional-N synthesizer and integer-N synthesizer modes ► Typical PFD spurious: <−105dBc ► Integrated RMS jitter at 1kHz to 100MHz integration bandwidth: <40fs ► Normalized inband phase noise floor FOM ► Integer mode: −232dBc/Hz ► Fractional mode: −229dBc/Hz ► Maintains frequency lock over −40°C to +85°C (lock and leave) ► Low phase noise VCO ► −115dBc/Hz typical at 100kHz (7.3GHz) ► −114dBc/Hz typical at 100kHz (10GHz) ► −109dBc/Hz typical at 100kHz (14.6GHz) ► RFOUT power (typical): 6dBm ► Programmable divide by 1, 2, 4, 8, 16, 32, 64, or 128 output ► Programmable output power level ► Typical power dissipation: 1W ► 48-terminal, 7 mm × 7 mm LGA package: 49 mm2 #ADF5611BCCZ #ADF5611 #FrequencySynthesizer #PLL #MicrowaveSynthesizer #RFIC #LowPhaseNoise #VCO #WirelessInfrastructure #SatelliteCommunication #MicrowaveRadio #TestAndMeasurement #AnalogDevices #RFDesign #ClockGeneration

Clock Generators, PLLs, Frequency Synthesizers ADF4351BCPZ LFCSP-32_L5.0-W5.0-P0.50-BL-EP3.5 LCSC Part Number: C654681 JLCPCB Part Class: Extended Part Manufactured by ADI(亚德诺)/LINEAR(凌特) Analog Devices ADF4351 wideband fractional-N and integer-N PLL frequency synthesizer with integrated voltage-controlled oscillator (VCO), generating RF output frequencies from 35MHz to 4.4GHz. Features low phase noise, programmable output divider ratios (/1, /2, /4, /8, /16, /32, /64), programmable RF output power, dual-modulus prescaler (4/5 or 8/9), analog and digital lock detect, fast lock mode, cycle slip reduction, auxiliary RF output, RF mute function, and 3-wire serial programming interface. Operates from 3.0V to 3.6V and is widely used in RF signal generators, local oscillators, SDR systems, wireless infrastructure, test equipment, microwave communications, clock generation, and laboratory instrumentation. Search Keywords: ADF4351, Analog Devices ADF4351, ADF4351BRUZ, RF synthesizer, PLL synthesizer, fractional N PLL, integer N PLL, integrated VCO, 35MHz to 4.4GHz synthesizer, RF signal generator IC, microwave frequency synthesizer, local oscillator PLL, SDR synthesizer, programmable RF generator, low phase noise synthesizer, SPI PLL synthesizer, RF clock generator Hashtags: #ADF4351 #AnalogDevices #PLL #FractionalNPLL #IntegerNPLL #FrequencySynthesizer #RFSynthesizer #IntegratedVCO #RFGenerator #SignalGenerator #LocalOscillator #MicrowaveRF #SDR #ClockGenerator #RFIC #WirelessInfrastructure #TestEquipment #LowPhaseNoise #SPIInterface #ADF4351Module

USB 3.0 high-definition video capture chip MacroSilicon Technology Co., Ltd. MS2130 is a USB 3.0 high-definition video and audio capture IC designed to convert HDMI/DVI input signals into USB video and audio streams. It integrates a USB 3.0 device controller, data transceiver, and audio/video processing modules, allowing HD video capture and preview on PCs, smartphones, and tablets through a USB interface. The device supports UVC/UAC standards and provides YUV422 and MJPEG video output formats for broad operating system compatibility. Key Features: HDMI 1.4b receiver with DVI 1.0 compatibility Supports HDCP 1.4 Maximum HDMI input resolution up to 4K (3840 × 2160) @ 30Hz Supports RGB444, YCbCr422, YCbCr444, and YCbCr420 color formats Supports deep color modes (24/30/36-bit) Integrated USB 3.0 device controller and transceiver USB 2.0 device mode compatibility Supports USB Video Class (UVC 1.0) and USB Audio Class (UAC 1.0) Video output supports YUV422 and MJPEG formats Default USB video output up to 1920 × 1080 @ 60Hz USB audio output with 48 kHz stereo support Compatible with Windows, Android, Linux, and macOS systems Requires external 24 MHz crystal oscillator Integrated PLL and power-on reset circuitry Available in QFN-64-EP (9 mm × 9 mm) package RoHS compliant Applications: HDMI to USB capture devices Video streaming equipment Online conferencing devices Embedded video acquisition systems Portable multimedia devices Hashtags: #MS2130 #MacroSilicon #USB30 #HDMICapture #VideoCaptureIC #HDMIToUSB #USBVideo #EmbeddedSystems #VideoProcessing #UVC #UAC #QFN64 #ElectronicsDesign #PCBDesign

Phase Lock Loop (PLL) IC 2.4MHz 1 16-DIP (0.300", 7.62mm) CD4046BE is a CMOS Micropower Phase-Locked Loop (PLL) integrated circuit that combines a linear Voltage-Controlled Oscillator (VCO), two phase comparators, a source follower, and a Zener diode in a single package. It is designed for frequency synthesis, frequency detection, FM demodulation, clock recovery, motor speed control, and other synchronization applications. The device operates over a wide supply voltage range and offers low power consumption, high noise immunity, and excellent VCO linearity. Key Features Wide operating supply voltage range: 3 V to 18 V Integrated Voltage-Controlled Oscillator (VCO) Two selectable phase comparators for flexible PLL design Operating frequency range up to approximately 1.4 MHz Very low power consumption High VCO linearity (typically <1%) Low frequency drift with temperature VCO inhibit control for ON/OFF keying applications Built-in source follower output for demodulation applications High noise immunity characteristic of CMOS technology Available in 16-pin PDIP (CD4046BE) package Typical Applications Frequency synthesis and multiplication FM modulation and demodulation Frequency discrimination Clock recovery and data synchronization Tone decoding Voltage-to-frequency conversion FSK modulation/demodulation Motor speed control systems Signal tracking and phase synchronization circuits Hashtags #CD4046BE #PLL #PhaseLockedLoop #VCO #ClockRecovery #FrequencySynthesizer #FMDemodulator #FSKModulation #CMOS #TexasInstruments #AnalogIC #TimingIC #SignalProcessing #EmbeddedSystems #ElectronicsDesign

Audio 16 b, 20 b, 24 b, 32 b 768k I2C, I2S, TDM 20-WQFN (3x3) The TAA3020IRTER is a high-performance 2-channel audio analog-to-digital converter (ADC) from Texas Instruments, designed for professional and embedded audio applications. It supports up to two analog microphone/line inputs or four digital PDM microphone channels with simultaneous sampling. The device delivers excellent audio quality with a 104 dB dynamic range, supports sample rates up to 768 kHz, and integrates advanced audio processing features such as programmable gain, digital filters, automatic gain control (AGC), voice activity detection (VAD), and an integrated PLL. It communicates through an I²C control interface and supports I²S, TDM, and Left-Justified (LJ) digital audio formats, making it ideal for smart speakers, conferencing systems, IP cameras, and other high-performance audio acquisition systems. Key Features High-performance 2-channel audio ADC Supports 2 analog microphone/line inputs or 4 digital PDM microphone inputs 104 dB dynamic range (DR) and –95 dB THD+N Sampling rates from 8 kHz to 768 kHz Programmable microphone gain from 0 dB to 42 dB Digital volume control from –100 dB to +27 dB Integrated programmable HPF, biquad filters, and low-latency filter modes Built-in Automatic Gain Control (AGC) and Voice Activity Detection (VAD) Integrated audio PLL and programmable microphone bias supply Supports I²S, TDM, and Left-Justified (LJ) audio interfaces Configurable for 1.8 V or 3.3 V supply operation Available in a compact 20-pin WQFN (RTE) package Operating temperature range: –40°C to +105°C #AudioADC #TexasInstruments #TAA3020 #HighPerformanceADC #I2S #TDM #PDMMicrophone #AudioProcessing #AGC #VAD #EmbeddedAudio #ProfessionalAudio

The RFFC5072 is a highly integrated wideband RF frequency conversion IC that combines a fractional-N PLL synthesizer, low phase-noise VCO, and a high-linearity RF mixer in a single device. It is designed for wireless infrastructure, software-defined radio (SDR), test equipment, military communications, and broadband frequency conversion applications. The device can generate local oscillator (LO) frequencies from 85 MHz to 4.2 GHz and perform frequency conversion for RF signals up to 6 GHz while maintaining excellent phase noise and spurious performance. Features  85MHz to 4200MHz LO Frequency Range  Fractional-N Synthesizer with Very Low Spurious Levels  Typical Step Size 1.5Hz  Fully Integrated Low Phase Noise VCO and LO Buffers  Integrated Phase Noise • 0.18° rms at 1GHz • 0.50° rms at 3GHz  High Linearity RF Mixer(s)  30MHz to 6000MHz Mixer Frequency Range  Input IP3 +23dBm  Mixer Bias Adjustable for Low Power Operation  Full Duplex Mode (RFFC5071)  2.7V to 3.3V Power Supply  Low Current Consumption  3- or 4-Wire Serial Interface Applications  Wideband Radios  Distributed Antenna Systems  Diversity Receivers  Software Defined Radios  Frequency Band Shifters  Point-to-Point Radios  WiMax/LTE Infrastructure  Satellite Communications  Wideband Jammers #RFFC5072 #Qorvo #RFMixer #FrequencySynthesizer #PLL #VCO #WidebandRF #FrequencyConverter #SDR #WirelessInfrastructure #RFDesign #MicrowaveEngineering #Telecommunications #EmbeddedSystems #ElectronicsDesign #RFIC #SignalProcessing #HardwareEngineering

ADC, Audio 32 b 8k ~ 192k I2S 20-WQFN (3x3) The PCM1822 is a high-performance, Burr-Brown™ audio analog-to-digital converter (ADC) that supports simultaneous sampling of up to two analog channels. The device supports single-ended and differential line and microphone inputs with a 1-VRMS full-scale signal. The device integrates a phase-locked loop (PLL), a DC removal high-pass filter (HPF), and supports sample rates up to 192 kHz. The device supports time-division multiplexing (TDM) or I2S audio formats, selectable with the hardware pin level. Additionally, the PCM1822 supports master and slave mode selection for the audio bus interface operation. These integrated high-performance features, along with the ability to be powered from a single supply of 3.3 V, make the device an excellent choice for costsensitive, space-constrained audio systems in far-field microphone recording applications. The PCM1822 is specified from –40°C to +125°C, and is offered in a 20-pin WQFN package. Features • Stereo high-performance ADC: – 2-channel analog microphones or line-in • ADC line and microphone differential and singleended input performance: – PCM1822 dynamic range: • 117-dB, dynamic range enhancer enabled • 111-dB, dynamic range enhancer disabled – THD+N: –95 dB • 1-VRMS full-scale input • ADC sample rate (fS) = 8 kHz to 192 kHz • Hardware pin control configurations • Linear-phase or low-latency filter selection • Flexible audio serial data interface: – Master or slave interface selection – 32-bits, 2-channel TDM – 32-bits, 2-channel I2S • Automatic power-down upon loss of audio clocks • Integrated high-performance audio PLL • Single-supply operation: 3.3 V • I/O-supply operation: 3.3 V or 1.8 V • Power consumption for 3.3-V AVDD supply: – 19.6 mW/channel at 16-kHz sample rate – 21.3 mW/channel at 48-kHz sample rate #CommonPartsLibrary #IntegratedCircuit #PCM1822IRTER #TexasInstruments #AudioADC #StereoADC #BurrBrown #I2S #TDM #AudioElectronics #EmbeddedAudio #SmartSpeaker #AVReceiver #HighResolutionAudio #PCBDesign #ElectronicsDesign #SignalProcessing

Clock Generators, PLLs, Frequency Synthesizers PLL1708DBQ SSOP-20_L8.7-W3.9-P0.64-LS6.0-BL LCSC Part Number: C2869485 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

Clock Generators, PLLs, Frequency Synthesizers PLL1706DBQR SSOP-20_L8.6-W3.9-P0.64-LS6.0-BL LCSC Part Number: C2878920 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

Clock Generators, PLLs, Frequency Synthesizers PLL1708DBQR SSOP-20_L8.7-W3.9-P0.64-LS6.0-BL LCSC Part Number: C2663191 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

Clock Generators, PLLs, Frequency Synthesizers PLL1705DBQ SSOP-20_L8.7-W3.9-P0.64-LS6.0-BL LCSC Part Number: C2872607 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Clock Generators, PLLs, Frequency Synthesizers PLL1705DBQR SSOP-20_L8.7-W3.9-P0.64-LS6.0-BL LCSC Part Number: C2864623 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Clock Generators, PLLs, Frequency Synthesizers PLL1707DBQR SSOP-20_L8.7-W3.9-P0.64-LS6.0-BL-1 LCSC Part Number: C2663193 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Clock Generators, PLLs, Frequency Synthesizers PLL1707IDBQRQ1 SSOP-20_L8.7-W3.9-P0.64-LS6.0-BL LCSC Part Number: C2865279 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Clock Generators, PLLs, Frequency Synthesizers PLL1707DBQ SSOP-20_L8.7-W3.9-P0.64-LS6.0-BL-1 LCSC Part Number: C1519963 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Clock Generators, PLLs, Frequency Synthesizers PLL1706DBQ SSOP-20_L8.6-W3.9-P0.64-LS6.0-BL LCSC Part Number: C1535737 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Clock Generators, PLLs, Frequency Synthesizers PLL1708DBQRG4 SSOP-20_L8.7-W3.9-P0.64-LS6.0-BL LCSC Part Number: C2663204 JLCPCB Part Class: Extended Part Manufactured by TI(德州仪器)

Clock Generators, PLLs, Frequency Synthesizers CD74HCT4046AM96 SOIC-16_L9.9-W3.9-P1.27-LS6.0-BL LCSC Part Number: C2662606 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)

Clock Generators, PLLs, Frequency Synthesizers TRF3761-EIRHAT VQFN-40_L6.0-W6.0-P0.50-TL-EP4.5 LCSC Part Number: C2662655 JLCPCB Part Class: undefined Manufactured by TI(德州仪器)