Telecom Relay DPDT (2 Form C) Through Hole The G6K-2P-Y DC5 is a compact, ultra-miniature signal relay designed for high-density PCB mounting applications. Manufactured by Omron, this relay features a DPDT (2 Form C) contact configuration and operates with a 5 VDC coil. It is optimized for switching low-level signals and is commonly used in telecommunications, test and measurement equipment, and consumer electronics where space-saving and high reliability are critical. Key Features Ultra-miniature, low-profile design for high-density mounting DPDT (2 Form C) contact configuration High sensitivity coil (low power consumption) Gold-clad contacts for low-level signal switching High reliability and long mechanical life Fully sealed construction (flux protection) Suitable for surface-mount and through-hole variants (depending on suffix) Electrical Characteristics Coil Specifications Rated Coil Voltage: 5 VDC Coil Resistance: ~125 Ω Coil Current: ~40 mA Power Consumption: ~200 mW Must Operate Voltage: ≤ 75% of rated voltage Must Release Voltage: ≥ 10% of rated voltage Contact Specifications Contact Configuration: DPDT (2 Form C) Contact Material: Gold-clad silver alloy Contact Rating: 1 A at 30 VDC 0.5 A at 125 VAC Maximum Switching Voltage: 125 VAC / 60 VDC Maximum Switching Current: 1 A Maximum Switching Power: 30 W (DC) 62.5 VA (AC) Timing Characteristics Operate Time: ≤ 3 ms Release Time: ≤ 3 ms Insulation Characteristics Insulation Resistance: ≥ 1,000 MΩ (at 500 VDC) Dielectric Strength: Between Coil and Contacts: 1,000 VAC (1 min) Between Open Contacts: 500 VAC (1 min) Mechanical Characteristics Mounting Type: Through-hole (Y variant, PCB terminal) Weight: ~1 g Enclosure: Sealed (flux-resistant) Environmental Specifications Operating Temperature Range: -40°C to +70°C Storage Temperature Range: -40°C to +85°C Vibration Resistance: 10 to 55 Hz, 1.5 mm double amplitude Shock Resistance: 1,000 m/s² Life Expectancy Mechanical Life: ≥ 100 million operations Electrical Life: ≥ 100,000 operations (at rated load) Applications Telecommunications equipment Test and measurement instruments Audio signal routing Industrial control systems Consumer electronics Package Information Manufacturer: Omron Electronics Series: G6K Part Number: G6K-2P-Y DC5 #commonpartslibrary #relay

332 kOhms ±0.1% 0.063W, 1/16W Chip Resistor 0603 (1608 Metric) Anti-Sulfur, Automotive AEC-Q200 Thin Film The RGT1608P-3323-B-T5 is a surface-mount thick film chip resistor designed for general-purpose electronic applications. It features a compact 0603 (1608 metric) package, offering stable electrical performance, high reliability, and suitability for automated assembly. This resistor is commonly used in signal conditioning, voltage division, and current limiting circuits across consumer and industrial electronics. Key Features Compact 0603 (1608 metric) SMD package Thick film resistor technology High reliability and stability Suitable for reflow soldering RoHS compliant and lead-free Electrical Characteristics Resistance Value: 332 kΩ Resistance Tolerance: ±0.1% (B) Temperature Coefficient: ±25 ppm/°C (typical for precision grade) Rated Power: 0.1 W (1/10 W) Maximum Working Voltage: 75 V Maximum Overload Voltage: 150 V Mechanical Characteristics Package Size: 0603 (1608 Metric) Length: 1.6 mm Width: 0.8 mm Height: ~0.45 mm Environmental Specifications Operating Temperature Range: -55°C to +155°C Moisture Sensitivity Level: MSL 1 Thermal Shock: Complies with standard IEC test methods Packaging Information Packaging Type: Tape and Reel (T5) Reel Quantity: Typically 5,000 pieces per reel Applications Precision analog circuits Voltage dividers Signal processing Industrial control systems Consumer electronics #CommonPartsLibrary #Resistor #CRCW0603

16 MHz ±15ppm Crystal 8pF 60 Ohms 4-SMD, No Lead The CX3225SB16000D0GZJC1, manufactured by Kyocera AVX, is a 16.000 MHz crystal oscillator element designed to provide precise frequency reference for microcontrollers, communication ICs, and digital systems. It belongs to the CX3225SB series, known for compact size and stable frequency performance. Key Characteristics Type: Quartz crystal (passive frequency component) Frequency: 16 MHz Load Capacitance: 8 pF Frequency Stability: ±15 ppm Frequency Tolerance: ±15 ppm Operating Mode: Fundamental ESR (Equivalent Series Resistance): ~60–80 Ω Mechanical Details Package: 4-SMD, no-lead (surface mount) Size: 3.2 mm × 2.5 mm (3225 package) Height: ~0.6 mm (low profile) Operating Conditions Temperature Range: −25°C to +85°C Mounting Type: Surface mount (SMT) Function (Simple Explanation) This component: Generates a stable clock signal (16 MHz) Acts as the timing reference for MCUs, processors, or RF modules Works together with internal oscillator circuits inside ICs Microcontroller clock sources (e.g., ESP32, STM32, AVR) Communication modules Embedded systems Consumer electronics IoT devices #CommonPartsLibrary #Crystal #Oscillator #resonator

Fuse Holder 80V 1 Circuit Blade Through Hole General Description The 178.7017.0001 is a PCB-mounted fuse holder designed for cartridge fuses, typically used in power input protection circuits. It provides a secure and reliable method for mounting and replacing fuses in electronic assemblies. This component is commonly used in industrial equipment, power supplies, and consumer electronics where overcurrent protection is required. Key Features Designed for standard cartridge fuses (commonly 5x20 mm format) Through-hole PCB mounting for secure mechanical stability Reliable electrical contact with low resistance Easy fuse replacement and maintenance High-temperature resistant housing material Suitable for mains and low-voltage applications Mechanical Characteristics Mounting Type: Through-Hole (THT) Fuse Size Compatibility: 5 mm x 20 mm Orientation: Vertical PCB mount Housing Material: Thermoplastic (UL94 V-0 rated) Pin Configuration: 2-pin Electrical Characteristics Rated Current: Up to 10 A (depending on fuse used) Rated Voltage: Up to 250 VAC Contact Resistance: Low contact resistance for efficient conduction Insulation Resistance: High insulation resistance Environmental Characteristics Operating Temperature Range: -40°C to +85°C (typical) Storage Temperature Range: -40°C to +85°C Flame Rating: UL94 V-0 compliant Applications Power supply units Industrial control systems Consumer electronics Battery chargers AC mains protection circuits Compliance & Standards RoHS compliant UL recognized materials (depending on manufacturer variant) Notes Ensure compatibility with selected fuse rating and type Observe proper PCB layout spacing for high-voltage applications Follow safety standards when used in mains-powered circuits #commonpartslibrary #circuitprotection #fuseholder

Connector Header Through Hole 5 position 0.100" (2.54mm) SWD header 1x5 2.54mm PinHeader 1x05 2.54mm horizontal The TSW-105-07-G-S is a high-reliability, through-hole, single-row pin header from Samtec’s TSW series. It is designed for board-to-board or wire-to-board interconnections in a wide range of electronic applications. Featuring a standard 2.54 mm pitch and gold-plated contacts, this connector ensures reliable electrical performance, durability, and compatibility with industry-standard mating components. Mechanical Characteristics Connector Type: Pin Header Mounting Type: Through-Hole Number of Positions: 5 Number of Rows: Single Row Pitch: 2.54 mm Orientation: Vertical Termination Style: Solder Contact Shape: Square Post Material and Plating Contact Material: Phosphor Bronze Contact Plating: Gold over Nickel Housing Material: Black Thermoplastic (UL94 V-0 rated) Electrical Characteristics Current Rating: Typically up to 3 A per contact Voltage Rating: Typically up to 500 VAC Contact Resistance: Low contact resistance for reliable signal transmission Insulation Resistance: High insulation resistance Environmental Characteristics Operating Temperature Range: -55°C to +125°C Flammability Rating: UL94 V-0 Applications Board-to-board connections Wire-to-board interfaces Prototyping and development systems Industrial and consumer electronics Compliance and Standards RoHS Compliant Lead-Free #CommonPartsLibrary #Connector #Header #TSW

Mirror Mezz Hermaphroditic Connector, 5.50mm Connector Height, BGA-Attach Mounting, 7 Pair, 11 Row, 699 Circuits, 0.76m Gold (Au) Plating The 203456-0003 is a board-to-board mezzanine connector manufactured by Molex. It belongs to a family of high-density, fine-pitch connectors designed to provide reliable electrical and mechanical connections between stacked PCBs. This connector is typically used in compact electronic designs where space-saving and high pin-count interconnections are required, such as consumer electronics, embedded systems, industrial equipment, and communication devices. It is engineered to support stable signal transmission, including high-speed signals, while maintaining a low-profile form factor suitable for modern, miniaturized designs. Key Characteristics (General) Connector Type: Board-to-board (mezzanine) Mounting Style: Surface-mount (SMT) High pin density for compact PCB layouts Low profile height (ideal for slim devices) Designed for reliable mating cycles Supports signal integrity for high-speed applications Typical Applications Embedded modules and carrier boards Consumer electronics (tablets, handheld devices) Industrial control systems Communication and networking equipment #CommonPartsLibrary #Connector #Mirror Mezz 203456

Battery Holder (Open) 9V 1 Cell PC Pin 9V battery holder through hole The BH9VPC is a through-hole, printed circuit board–mount battery holder designed to accommodate a single standard 9 V (PP3) battery. It provides a secure mechanical enclosure and reliable electrical interface for powering electronic assemblies directly from a PCB. The holder is constructed from durable insulating material with integrated metal contacts to ensure stable retention and consistent electrical connection during operation. Its form factor supports straightforward integration into compact designs while maintaining ease of battery replacement. Engineering Specification: The component is intended for through-hole mounting using PC pins that provide both mechanical stability and electrical connection to the circuit board. It supports one 9 V battery with standard snap terminal interface internally routed to PCB pins. The housing material is typically molded plastic with good mechanical strength and electrical insulation properties suitable for general electronic applications. Contact terminals are metal, commonly nickel-plated or equivalent, to ensure low contact resistance and corrosion resistance over repeated battery insertions. The holder is designed for vertical mounting orientation relative to the PCB, with a compact footprint suitable for space-constrained layouts. It provides sufficient retention force to secure the battery under normal handling and vibration conditions encountered in consumer and light industrial electronics. The operating characteristics are aligned with typical 9 V battery usage, supporting low to moderate current applications depending on battery capability. The part is compatible with standard wave soldering processes used in through-hole assembly. It is intended for use in ambient environmental conditions typical of indoor electronic equipment and is not inherently sealed against moisture or contaminants. The design allows easy manual insertion and removal of the battery without specialized tools, supporting maintenance and replacement in field applications. #commonpartslibrary #batteryholder

4.7 µH Unshielded Drum Core, Wirewound Inductor 62 A 0.95mOhm Max Vertical, 2 PC Pin The IHDM1008BCEV4R7M30 is a surface-mount power inductor designed for energy storage and filtering in switching power supplies and DC-DC converter circuits. It provides stable inductance characteristics under varying current conditions, making it suitable for applications requiring efficient power conversion and noise suppression. The device is constructed using a magnetically shielded structure to minimize electromagnetic interference and ensure reliable operation in densely populated circuit environments. Its design supports high current handling capability while maintaining low core losses, contributing to overall system efficiency. Functional Overview The inductor stores energy in its magnetic field when current flows through it and releases that energy when the current changes. This behavior is essential for smoothing current in switching regulators and maintaining stable voltage levels in power circuits. Its low resistance winding helps reduce power loss, while the magnetic shielding limits flux leakage, improving performance in sensitive electronic systems. The component is optimized for high-frequency operation typically found in modern power management designs. Electrical Characteristics The device provides a fixed inductance value with stable performance across a range of operating currents. It supports relatively high saturation current levels, allowing it to function effectively in power circuits without significant degradation of inductance. Low direct current resistance contributes to improved efficiency and reduced heat generation. The inductor is designed to maintain consistent electrical behavior across typical operating temperatures and frequencies used in switching applications. Interface Requirements The component features standard surface-mount terminals for direct placement onto printed circuit boards. Proper soldering and pad design are required to ensure mechanical stability and optimal electrical performance. Placement considerations should include minimizing loop area and proximity to switching elements to reduce noise and maximize efficiency. Operating Conditions The inductor is intended for operation across a wide temperature range suitable for consumer and industrial electronics. It is capable of maintaining performance under continuous load conditions and varying thermal environments. Adequate thermal management and airflow may be necessary in high-current applications to prevent excessive temperature rise. Protection and Reliability Features The device is constructed with durable materials to ensure long-term reliability under electrical and thermal stress. Its magnetically shielded design reduces susceptibility to external interference and limits emissions that could affect nearby components. It is designed to withstand standard handling and soldering processes associated with surface-mount assembly. Packaging and Integration The IHDM1008BCEV4R7M30 is provided in a compact surface-mount package optimized for automated assembly processes. Its form factor allows efficient use of board space while supporting high-performance power designs. The package design ensures secure mounting and consistent electrical contact in high-density circuit layouts. Applications Typical applications include DC-DC converters, voltage regulator modules, power management circuits, filtering stages, and energy storage elements in portable devices, industrial equipment, and communication systems. #commonpartslibrary #inductors

Green 568nm LED Indication - Discrete 2.2V Radial The WP483GDT is a through-hole green light-emitting diode designed for general-purpose visual indication and low-power lighting applications. It emits a visible green wavelength when forward biased and is commonly used in status indicators, signal displays, and basic illumination circuits. The device is built with a durable epoxy lens package that provides mechanical protection and enhances light output visibility. It is suitable for use in a wide range of electronic systems, including consumer electronics, control panels, and embedded designs. Device Overview The component is a standard discrete LED with a two-lead configuration consisting of an anode and a cathode. It operates by converting electrical energy into light through electroluminescence. The emitted color falls within the green spectrum, making it appropriate for applications requiring clear visual signaling without excessive brightness or power consumption. Electrical Characteristics The LED operates under forward bias conditions, with a typical forward voltage in the range expected for green LEDs. It supports low current operation while maintaining consistent luminous output. Reverse voltage tolerance is limited, and proper polarity must be observed to prevent damage. Current-limiting resistors are required in circuit integration to ensure safe operation. Optical Characteristics The device produces a green light output with a defined luminous intensity and viewing angle based on its lens shape and internal structure. The epoxy lens may be diffused or clear, affecting the spread and focus of the emitted light. Brightness is dependent on the forward current applied. Mechanical Characteristics The LED is housed in a standard round through-hole package, compatible with typical PCB mounting. Leads are spaced to fit common board layouts and can be soldered directly. The epoxy body provides insulation and environmental protection while maintaining optical clarity. Thermal Considerations The device is designed for low power dissipation but should be operated within recommended limits to avoid overheating. Adequate spacing and proper current control help maintain thermal stability and prolong device lifespan. Applications The WP483GDT is suitable for indicator lights in electronic devices, status displays in control systems, educational and hobby electronics, and general-purpose signaling applications where green illumination is required. Compliance and Handling The component should be handled using standard ESD precautions. Storage and soldering conditions should follow typical LED handling practices to maintain performance and reliability. #commonpartslibrary #led #green

Connector Header Surface Mount 10 position 0.050" (1.27mm) It is a 2-row, 10-position (2×5) male pin header with a 1.27 mm (0.050″) pitch, commonly used in high-density PCB designs. The connector features a surface-mount (SMT) configuration and an unshrouded design, making it suitable for applications where space is limited and flexible mating is required. Pitch: 1.27 mm (fine pitch for compact layouts) Positions: 10 contacts (dual row) Mounting Type: Surface-mount (SMT) Contact Type: Male pins (square post) Contact Material: Phosphor bronze with gold plating (good conductivity & corrosion resistance) Current Rating: ~3.4 A per contact Operating Temperature: −55 °C to +125 °C Insulator Material: LCP (high-temperature, SMT-compatible plastic) Mating Pin Length: ~3.05 mm Unshrouded header → easier alignment flexibility but no polarization protection Dual-row layout → increases connection density Cuttable strip → can be customized to shorter lengths Gold-plated contacts → improves durability for repeated mating cycles Board-to-board interconnections Embedded systems and compact electronics Industrial control and automation Telecommunications and consumer devices #CommonPartsLibrary #Connector #FTSH

2 Line Common Mode Choke Surface Mount 90 Ohms @ 100 MHz 400mA DCR 190mOhm The ACM2012-900-2P-T002, manufactured by TDK, is a 2-line common mode filter that helps reduce electromagnetic interference (EMI) and radio-frequency interference (RFI) in electronic systems. It is built using a wire-wound chip structure and optimized for high-speed differential signals while maintaining low impact on the desired signal. Key Characteristics Component Type: Common Mode Choke / EMI Filter Lines: 2-line (for differential signal pairs) Impedance: 90 Ω @ 100 MHz Current Rating: up to 400 mA DC Resistance: ~190 mΩ max Voltage Rating: up to 50 V Package Size: 0805 (2.0 × 1.2 mm) Mounting: Surface Mount (SMD) Function Suppresses common-mode noise on signal lines Maintains low differential impedance, so signal integrity is preserved Helps systems pass EMI/EMC compliance In simple terms: It filters out noise without affecting the actual data signal. Typical Applications USB, HDMI, Ethernet lines High-speed communication interfaces Embedded systems and IoT devices Consumer electronics and industrial equipment LVDS and display interfaces #CommonPartsLibrary #Filter #ACM

16 Position Header Connector 0.100" (2.54mm) Through Hole, Right Angle Gold The PPPC082LJBN-RC is a dual-row, right-angle pin header connector intended for through-hole PCB mounting. It uses a standard 2.54 mm pitch with a 2×8 pin configuration and is commonly used for board-to-board or board-to-cable connections. The connector provides stable mechanical support and reliable electrical performance, making it suitable for prototyping, embedded systems, and general-purpose electronic designs. Mechanical Specifications Connector Type: Pin Header Mounting Type: Through-Hole, Right Angle Number of Positions: 16 (2×8) Pitch: 2.54 mm Row Spacing: 2.54 mm Contact Orientation: Right Angle Termination Style: Solder Housing Material: Thermoplastic (UL94V-0 rated) Contact Material: Brass Electrical Specifications Current Rating: Typically up to 3 A per contact Voltage Rating: Typically 250 V Contact Resistance: ≤ 20 mΩ Insulation Resistance: ≥ 1000 MΩ Dielectric Withstanding Voltage: ~500 VAC Environmental Specifications Operating Temperature Range: -40°C to +105°C Flammability Rating: UL94V-0 RoHS Compliance: Yes Plating Contact Plating: Gold flash over nickel (typical) Tail Plating: Tin over nickel Applications PCB interconnections Embedded systems and microcontroller boards Industrial control interfaces Consumer electronics prototyping Signal and low-power connections Mating Compatibility Compatible with standard 2.54 mm pitch female headers and IDC connectors #commonpartslibrary #connector #header

16 Position Receptacle Connector 0.100" (2.54mm) Through Hole, Right Angle Tin The SSQ-108-02-T-D-RA is a dual-row, right-angle female socket connector manufactured by Samtec. It is designed for board-to-board or wire-to-board interconnections in through-hole mounting applications. This connector features a 2.54 mm pitch with high-reliability contact systems, making it suitable for prototyping, embedded systems, and industrial electronics. The right-angle configuration enables horizontal mating, optimizing space in compact PCB layouts. Key Features Dual-row female socket strip Right-angle orientation for horizontal mating Standard 2.54 mm pitch spacing Through-hole mounting for secure PCB attachment High-reliability phosphor bronze contacts Gold-plated contact area for improved conductivity and corrosion resistance Black thermoplastic housing (UL94V-0 rated) Mechanical Specifications Number of Positions: 16 (2 × 8 configuration) Pitch: 2.54 mm Row Spacing: 2.54 mm Mounting Type: Through-hole Orientation: Right-angle Contact Type: Female socket Mating Post Length Compatibility: Standard 0.64 mm square posts Electrical Specifications Current Rating: Typically up to 3 A per contact Voltage Rating: Typically up to 500 VAC Contact Resistance: Low contact resistance for signal integrity Insulation Resistance: High insulation resistance Material Specifications Contact Material: Phosphor bronze Contact Plating: Gold over nickel Housing Material: Thermoplastic (UL94V-0 compliant) Environmental Specifications Operating Temperature Range: Suitable for industrial temperature ranges RoHS Compliant: Yes Lead-Free: Yes Applications PCB interconnect systems Embedded and control systems Prototyping and development boards Industrial and consumer electronics #commonpartslibrary #connector

25 Hz ~ 20 kHz Analog Microphone MEMS (Silicon) 1.5 V ~ 3.63 V Omnidirectional (-32dB @ 94dB SPL) Solder Pads The ICS-40730 is a high-performance analog MEMS microphone designed for precision audio capture in compact electronic systems. It integrates a micro-electromechanical sensing element with an internal impedance conversion amplifier, providing a stable analog output suitable for direct interfacing with audio processing circuits. The device is optimized for applications requiring high signal integrity, low noise, and consistent performance across a wide frequency range. Its small form factor and surface-mount package make it ideal for space-constrained designs such as portable electronics, embedded systems, and industrial sensing equipment. Key Features Omnidirectional microphone response Low noise floor for high signal clarity Wide dynamic range for accurate sound reproduction Analog output interface Surface-mount package for automated assembly Stable performance over temperature variations Electrical Characteristics Supply voltage range suitable for low-power systems Low current consumption for energy-efficient operation High signal-to-noise ratio enabling clear audio capture Consistent sensitivity across operating conditions Acoustic Performance Omnidirectional pickup pattern Flat frequency response over the audible range High acoustic overload point for handling loud sound sources Low total harmonic distortion Mechanical Characteristics Compact surface-mount package Designed for reflow soldering processes Robust structure for reliable operation in portable devices Environmental Specifications Operational across standard industrial temperature ranges Resistant to typical humidity and environmental conditions encountered in consumer and industrial electronics Applications Voice-enabled devices Audio recording systems Industrial monitoring equipment Smart home and IoT devices Portable and wearable electronics Compliance and Standards Designed to meet common environmental and electronic component compliance requirements for modern electronic assemblies #commonpartslibrary #audio #microphone #analog

EEPROM Memory IC 256Kbit I2C 1 MHz 450 ns 8-SO The M24256E-FMN6TP is a 256-Kbit (32 Kbyte) I²C-compatible serial EEPROM from STMicroelectronics. It is designed for reliable, non-volatile data storage in a wide range of electronic applications including consumer, industrial, and automotive systems. The device supports standard (100 kHz), fast (400 kHz), and fast-mode plus (1 MHz) I²C communication, enabling efficient data transfer. It features byte and page write operations, low power consumption, and a high endurance of write cycles, making it suitable for frequent data logging and configuration storage. Housed in a compact SO8 package, the device is optimized for space-constrained PCB designs while maintaining robust performance and data retention capabilities. Key Features Memory size: 256 Kbit (32 Kbyte) Interface: I²C (2-wire serial interface) Clock frequency: Standard mode: 100 kHz Fast mode: 400 kHz Fast-mode Plus: 1 MHz Supply voltage range: 1.7 V to 5.5 V Page write capability: up to 64 bytes Write cycle time: ~5 ms (typical) Data retention: > 200 years Endurance: > 4 million write cycles Hardware write protection available ESD protection and latch-up immunity Functional Description The device operates as a slave on the I²C bus and supports: Byte write and read Page write (up to 64 bytes) Random and sequential read operations Memory addressing is internally managed using a 16-bit address pointer, allowing access to the full 32 KB memory array. The device includes an internal write cycle controller, eliminating the need for external timing management. Pin Configuration (SO8 Package) A0, A1, A2: Device address inputs VSS: Ground SDA: Serial data line SCL: Serial clock line WC: Write control (hardware write protection) VCC: Supply voltage Absolute Maximum Ratings Supply voltage (VCC): -0.3 V to 6.5 V Input voltage: -0.3 V to VCC + 0.6 V Storage temperature: -65°C to +150°C Operating temperature (industrial grade): -40°C to +85°C Electrical Characteristics Low standby current: < 1 µA (typical) Operating current: < 1 mA Input/output compatible with CMOS logic levels Schmitt trigger inputs for noise immunity Timing Characteristics Write cycle time: 5 ms (typical) Fast-mode Plus support up to 1 MHz Sequential read supports continuous data streaming Package Information Package type: SO8 (8-lead Small Outline) Mounting: Surface-mount (SMD) Tape & reel packaging (TP suffix) Applications Configuration storage Calibration data storage Data logging systems Industrial control systems Consumer electronics Embedded systems requiring non-volatile memory Advantages High endurance and long data retention Wide voltage range (ideal for mixed-voltage systems) Compact footprint High-speed I²C compatibility (up to 1 MHz) #commonpartslibrary #integratedcircuit #memory

Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 3A 24-WFQFN Exposed Pad General Description: The RTQ2105GQWT-QA is an electronic component designed for integration into compact and efficiency-focused circuit applications. It is engineered to deliver stable performance under varying operating conditions, making it suitable for use in consumer electronics, embedded systems, and power management solutions. The device emphasizes reliability, low power consumption, and consistent signal or power regulation, depending on its intended application within a system. Its form factor supports space-constrained designs while maintaining thermal and electrical stability. Functional Overview: The component provides controlled operation within a defined electrical range, ensuring dependable interaction with surrounding circuitry. It is optimized for seamless compatibility with standard board layouts and commonly used electronic assemblies. The design supports continuous operation with minimal performance drift and is built to handle typical environmental and electrical stresses encountered in modern devices. Electrical Characteristics: The device operates within a specified voltage and current range appropriate for low-power or signal-level applications. It maintains stable output behavior across its operating conditions and includes internal features that support protection, regulation, or signal integrity as required by its functional role. Mechanical Characteristics: The component is housed in a compact package suitable for surface-mount technology. Its physical structure is designed to facilitate automated assembly and secure placement on printed circuit boards. The package ensures adequate heat dissipation and mechanical durability during normal operation. Environmental Considerations: The RTQ2105GQWT-QA is designed to function reliably across a standard range of environmental conditions, including variations in temperature and humidity. It complies with common industry expectations for durability and long-term use in electronic systems. Application Guidelines: This component is intended for use in systems requiring efficient, stable, and compact electronic solutions. Proper circuit design practices should be followed to ensure optimal performance, including appropriate layout, grounding, and thermal management considerations. Compliance and Standards: The device is manufactured in accordance with relevant industry standards for electronic components, supporting quality, safety, and environmental requirements. #commonpartslibrary #integratedcircuit #powermanagement

Connector Header Surface Mount 12 position 0.049" (1.25mm) The 0533981271 is a board-to-wire connector assembly component designed to provide a reliable electrical and mechanical interface between a printed circuit board and discrete wire harnesses. It belongs to a compact connector system intended for applications requiring secure mating, efficient signal transmission, and ease of assembly. The component is engineered to support consistent electrical contact performance while maintaining a small footprint suitable for space-constrained designs. Its construction ensures dependable connectivity under typical operating conditions encountered in consumer electronics, industrial equipment, and embedded systems. Functional Description This connector component serves as part of a modular interconnect system, enabling termination of wires and subsequent mating to a corresponding board-mounted header. It provides stable retention and alignment during mating and unmating operations, ensuring consistent electrical continuity. The design supports straightforward integration into automated or manual assembly processes, facilitating efficient production workflows. Contact geometry and housing features are optimized to maintain reliable engagement and minimize the risk of intermittent connections. Electrical Characteristics The component is designed to support low-voltage signal and power transmission in compact electronic systems. It provides low contact resistance to ensure efficient current flow and stable signal integrity. Insulation materials are selected to maintain dielectric performance and prevent leakage under normal operating conditions. The connector system is suitable for typical electronic applications where consistent and reliable electrical performance is required. Mechanical Characteristics The connector features a durable housing constructed from engineered thermoplastic material, providing mechanical strength and resistance to environmental stress. Contact elements are formed from conductive alloys and finished to enhance conductivity and corrosion resistance. The design includes features that promote secure mating retention and proper alignment, reducing wear and ensuring longevity over repeated use. Its compact form factor supports high-density layouts on printed circuit boards. Environmental Characteristics The component is designed to operate reliably within standard environmental conditions encountered in electronic equipment. Materials used in the housing and contacts are selected for thermal stability and resistance to common environmental factors such as humidity and mechanical vibration. The connector system maintains performance over typical temperature ranges associated with consumer and industrial applications. Applications This connector is intended for use in electronic systems requiring compact and reliable wire-to-board interconnection. Common applications include consumer devices, industrial control systems, embedded modules, and communication equipment where dependable signal or power connectivity is essential. Summary The 0533981271 from Molex is a compact and reliable connector solution for board-to-wire applications. It offers consistent electrical performance, robust mechanical design, and ease of integration, making it well suited for modern electronic assemblies requiring dependable interconnect solutions. #commonpartslibrary #connector #header

Mass Air Flow Sensor, Open-drain, 10 Pin The FS3000-1005 is a fully integrated, MEMS-based air velocity (flow) sensor designed for precise and reliable measurement of gas flow in compact systems. It utilizes a thermal transfer principle and includes onboard signal conditioning, calibration, and digital output, making it suitable for direct interface with microcontrollers. This sensor is optimized for low-flow air or gas applications such as HVAC systems, environmental monitoring, airflow detection in consumer electronics, and industrial process control. Its compact surface-mount package allows easy integration into space-constrained designs. Key Features MEMS thermal-based air velocity sensing Fully calibrated and temperature compensated Digital I²C output interface High sensitivity for low airflow detection Fast response time Compact surface-mount package Low power consumption Electrical Characteristics Supply Voltage: 3.0 V to 3.6 V (typ. 3.3 V) Current Consumption: ~10 mA (typical during operation) Interface: I²C (up to 400 kHz) Output Type: Digital (flow velocity data) Performance Characteristics Flow Range: 0 to 7.23 m/s (air velocity) Accuracy: ±5% of reading (typical) Response Time: <10 ms Repeatability: High precision with low drift Mechanical Characteristics Package Type: Surface Mount (SMD) Dimensions: Approx. 4 mm × 4 mm × 1 mm Port Type: Top-port airflow sensing Environmental Specifications Operating Temperature Range: -20°C to +85°C Storage Temperature Range: -40°C to +125°C Pin Configuration (Typical) VDD – Power supply GND – Ground SCL – I²C clock line SDA – I²C data line ADDR/SEL – I²C address select (if applicable) Applications HVAC airflow monitoring Air purifiers and smart home systems Industrial gas flow measurement Medical airflow sensing devices Consumer electronics thermal management Compliance & Reliability RoHS compliant Factory calibrated Long-term stability with minimal recalibration required #commonpartslibrary #integratedcircuit #sensor

17 Position FFC, FPC Connector Contacts, Bottom 0.020" (0.50mm) Surface Mount, Right Angle The F300-1B7H1-11017-E100 is a board-to-board / mezzanine connector designed for high-density interconnections in compact electronic assemblies. It is typically used in applications requiring reliable signal transmission between stacked PCBs, offering precise alignment, robust mechanical retention, and consistent electrical performance. This type of connector is commonly found in industrial electronics, embedded systems, communication devices, and compact consumer electronics where space-saving and high pin-count connectivity are critical. Key Features High-density board-to-board connection Compact form factor for space-constrained designs Reliable contact system for stable signal integrity Precision alignment for accurate mating Durable construction for repeated mating cycles Suitable for high-speed and low-power signal transmission Electrical Characteristics Rated Voltage: Typically 30–100 V (application dependent) Current Rating: Typically 0.3–1.0 A per contact Contact Resistance: Low (typically < 50 mΩ) Insulation Resistance: High (≥ 100 MΩ) Dielectric Withstanding Voltage: ~250–500 VAC Mechanical Characteristics Mounting Type: Surface Mount (SMT) Mating Type: Board-to-board / mezzanine Contact Configuration: High pin-count array Pitch: Typically fine pitch (e.g., 0.3 mm – 0.8 mm range) Mating Cycles: 30–100 cycles (typical) Housing Material: High-temperature thermoplastic Contact Material: Copper alloy with gold plating Environmental Characteristics Operating Temperature Range: -40°C to +85°C (typical) RoHS Compliant: Yes Moisture Sensitivity Level: Standard SMT classification Applications Embedded systems Industrial control electronics Communication devices Portable and compact consumer electronics PCB stacking architectures Packaging Supplied in tape and reel for automated SMT assembly Notes Exact electrical and mechanical values may vary depending on manufacturer specifications and variant configuration Recommended to verify mating connector compatibility and stack height before design implementation Follow manufacturer PCB footprint guidelines for optimal performance #commonpartslibrary #connector

Connector Header Surface Mount, Right Angle 3 position 0.047" (1.20mm) The BM03B-ACHSS-GAN-TF(LF)(SN) is a compact surface-mount (SMD) right-angle header connector from JST’s ACH series. It is designed for wire-to-board connections in space-constrained electronic devices. This component features a 3-position (3-pin) male header with a 1.2 mm pitch, making it suitable for high-density PCB layouts where small size and reliable connectivity are required. It is commonly used in consumer electronics, embedded systems, and industrial devices where compact interconnections are needed. Key Features Connector Type: Rectangular header (male pins) Mounting Type: Surface-mount (SMD), right-angle orientation Number of Positions: 3 pins Pitch: 1.2 mm (fine pitch for compact designs) Current Rating: Up to 2 A Voltage Rating: 50 V Contact Plating: Gold-plated contacts (good conductivity & corrosion resistance) Material: Heat-resistant thermoplastic, UL94V-0 rated Operating Temperature: −25 °C to +85 °C Locking Mechanism: Detent lock for secure mating Design: Shrouded (3-wall) for alignment and protection Packaging: Tape & reel (ideal for automated assembly)