15µH Shielded Drum Core, Wirewound Inductor 5.45 A 25.8mOhm Max Nonstandard The 7447798151 is a 15 µH shielded wirewound drum core inductor optimized for high current power applications. It features low DC resistance and high saturation current capability, making it suitable for compact, high-frequency power designs. Key Features Inductance: 15 µH High current rating: up to 5.45 A (RMS) Saturation current: ~4 A Low DC resistance: 25.8 mΩ max Shielded construction for low EMI / magnetic leakage High self-resonant frequency: ~19 MHz Wide operating temperature: -40°C to +150°C Compact SMD package (~10.2 mm × 10.2 mm footprint) Typical Applications DC-DC converters (buck / boost) Power supply filtering Automotive and industrial power systems Point-of-load (POL) regulators High-frequency switching circuits #WurthElektronik #WEPDF #PowerInductor #15uH #SMDInductor #ShieldedInductor #PowerElectronics #ElectronicsComponents #SMTComponents #CommonPartsLibrary #Fixed-Inductor

Non-Isolated PoL Module DC DC Converter 1 Output 0.8 ~ 6V 10A 6V - 20V Input The LMZ22010TZ/NOPB is a compact, high-efficiency step-down (buck) DC-DC power module from Texas Instruments. It integrates a switching regulator, power MOSFETs, inductor, and compensation components into a single package, simplifying power supply design. This module is capable of delivering up to 10A output current with excellent thermal performance and minimal external components. It is intended for high power density applications such as industrial systems, telecommunications equipment, and embedded processing platforms. Manufacturer Information Manufacturer: Texas Instruments Part Number: LMZ22010TZ/NOPB Product Type: DC-DC Buck Power Module Key Features Integrated power module with inductor and controller Output current up to 10A Wide input voltage range High efficiency operation Adjustable output voltage Built-in protection features (thermal shutdown, overcurrent protection) Power-good output and enable control Requires minimal external components Electrical Characteristics Parameter Value Input Voltage Range 6 V to 20 V Output Voltage Range 0.8 V to 6 V (adjustable) Output Current Up to 10 A Switching Frequency ~500 kHz Efficiency Up to ~95% Operating Temperature Range -40°C to +125°C Package Information Package Type: TO-PMOD (Power Module) Mounting Type: Surface Mount Integrated inductor and power components Optimized for thermal performance Pin Configuration (Typical) Pin Name Description VIN Input supply voltage VOUT Regulated output voltage GND Ground EN Enable input FB Feedback for output adjustment PGOOD Power-good indicator Typical Applications Industrial automation systems Telecom and networking equipment FPGA / DSP / processor power rails Embedded systems Point-of-load regulation Design Considerations Ensure proper PCB layout for heat dissipation Use appropriate input/output capacitors External resistors required to set output voltage Consider airflow for high-current operation #commonpartslibrary #powersupply #dcdc #converter

USB Type C PMIC 40-TQFN (6x6) The MAX25432 combines an automotive-grade buckboost controller capable of full-range 3.3V to 21V programmable power supply (PPS) at up to 6.35A, USB Power Delivery (USB PD) analog front-end (AFE), legacy USB charging support, and USB Type-C® protection switches for automotive USB host or downstream-facing (DFP) applications. The USB TypeC protection switches provide automotive system-level ESD protection and 24V short-circuit protection for D+, D-, CC1, CC2, and VCONN. The device can optionally support legacy charging modes for older passenger phones including BC1.2, Apple® Charge, Apple CarPlay®, Apple MFi, and USB On-The-Go (OTG). The MAX25432B integrates a USB PD AFE, which supports the USB-IF Type-C Port Controller Interface (TCPCI) specification and can interface with any I2C controller in the application. The MAX25432A provides configuration channel (CC) signal pass-through protection for an external USB PD controller. P-suffix and G-suffix devices include intelligent detection and protection to avoid high short-circuit currents flowing from the car battery through the cable shield to ground during fault events, thus preventing car module damage. The MAX25432 is available in a small, 6mm x 6mm, 40- pin TQFN-EP package and requires very few external components. The MAX25432 evaluation (EV) kit and collateral provide a convenient platform to the design engineer for rapid evaluation with reduced test and firmware development time. Integrated I2C Buck-Boost Controller with PPS 4.5V to 36V Input Operating Range 3.3V to 21V Constant Voltage, 10mV LSB 1A to 6.35A Current Limit, 25mA LSB 220kHz, 300kHz, and 400kHz SwitchingFrequency VBUS Cable Compensation up to 516mΩ External Frequency Synchronization and SpreadSpectrum for Reduced EMI USB PD 3.1 Type-C Port Controller USB-IF Compliant - TID 9154 Up to 800mV Ground Offset Pairs with ADI TCPM for Turn-Key Solution MAX25432BATLP Enables: ADI TCPM Alternate Mode and Dual-Role Port Improved CC Detection Advanced Monitoring Algorithms (V, T) Dynamic Loop Control Highest Performance, Safest, and Lowest Cost Passenger Cable-Shield Short-to-Battery Protection Minimizes Short-Circuit Currents with a Small,Single-FET Solution Integrated Current-Sense Amplifiers, ADC and DAC Integrated 3.3V to 5.0V, 1.5W, Smart, Reliable VCONN Switches and Protection, 50mA to 500mA OCP Integrated 24V DC Protection on Protected HVD+, HVD-, HVCC1, HVCC2 Outputs Integrated Legacy USB 2.0 Charging Support Including BC1.2, Apple CarPlay, OTG, and Apple MFi Rev 3x Integrated ±15kV Air-Gap/±8kV Contact Discharge ISO 10605 and IEC 61000-4-2 ESD Protection -40°C to +125°C Operating Temperature Range 40-Pin, 6mm x 6mm, TQFN Package with EP AEC-Q100 and AEC-Q006 Qualified #CommonPartsLibrary #IntegratedCircuit #PowerManagement

39 mH @ 10 kHz 2 Line Common Mode Choke Through Hole 300mA DCR The 744821039 is a common mode choke (CMC) designed for power line filtering. It is used to suppress electromagnetic interference (EMI), particularly common-mode noise in AC/DC power circuits and switching power supplies. Type: Common mode choke (power line filter) Inductance: 39 mH @ 10 kHz Rated current: 300 mA Number of lines: 2-line configuration Mounting: Through-hole (radial/vertical, 4 pins) AC voltage rating: up to 250 V DC resistance: ~3 Ω max Operating temperature: −40°C to +125°C Blocks high-frequency noise on power lines Allows normal differential current (useful signal) to pass Improves EMC compliance of electronic systems Reduces radio interference (RFI) in circuits AC/DC power supply input filters Switch-mode power supplies (SMPS) Industrial electronics and motor drives Household appliances and embedded systems Devices without proper grounding (noise suppression) #CommonPartsLibrary #Inductor #WE-CMB

33µH Shielded Drum Core, Wirewound Inductor 8 A 58mOhm Max Nonstandard The SRP1265A-330M is a shielded wirewound power inductor from the Bourns SRP1265A series, designed for high-current DC-DC converters, voltage regulator modules, and power supply applications. It features a carbonyl powder core construction that provides high saturation current capability, low electromagnetic interference (EMI), and stable inductance characteristics in compact surface-mount packaging. The device is AEC-Q200 qualified, making it suitable for automotive and industrial environments. Key Features 33 µH inductance Shielded construction for reduced EMI High saturation current capability Carbonyl powder core Low DC resistance Surface-mount package Wirewound drum-core structure AEC-Q200 qualified RoHS compliant and halogen free Operating temperature up to +150 °C Suitable for high-current switching regulators and DC-DC converters Electrical Characteristics Inductance: 33 µH Tolerance: ±20% Current Rating: 8 A Saturation Current (Isat): 11 A DC Resistance (Max): 58 mΩ Self-Resonant Frequency: 5 MHz Typical Applications DC-DC converters Switching power supplies Automotive electronics EMI filtering Industrial power systems LED drivers Battery-powered equipment #CommonPartsLibrary #Inductor #SMD

Non-Isolated PoL Module DC DC Converter 1 Output 1 ~ 36V 12A 5V - 36V Input The LTM®4712 is a high efficiency buck-boost µModule® (micromodule) regulator. The switching controller, power switches, inductor and support components are included in the package. The complete design requires only a few external components, including a resistor to set frequency, a resistor to set output voltage, input, and output capacitors, a sensing resistor to achieve input or output average current regulation. The LTM4712 operates over a 5V to 36V input voltage range and can regulate output voltages between 1V and 36V. The LTM4712 supports selectable forced continuous mode (FCM)/pulse-skipping mode (PSM) operation. The current mode control enables a fast transient response to line and load changes without sacrificing stability. The SYNC input and CLKOUT output allow easy synchronization. It supports multi-phase parallel operation for high power applications. The LTM4712 is offered in a 16mm × 16mm × 8.34mm ball grid array (BGA) package suitable for automated assembly by standard surface mount equipment. The LTM4712 is RoHS-compliant n Complete Buck-Boost Switch Mode Power Supply n VOUT Equal, Greater, Less Than VIN n Wide Input Voltage Range: 5V to 36V n Wide Output Voltage Range: 1V to 36V n 12A in Buck and Buck-Boost Mode, 6A under 12VIN and 24VOUT n Up to 98% Efficiency n Peak Current Mode Control n Adjustable Input or Output Average Current Limits n Input or Output Current Monitoring n Power Good Output Signal n Parallelable for Increased Output Current n Phase-Lockable Fixed Frequency: 100kHz to 600kHz n Selectable Forced Continuous/Pulse-Skipping Modes n VOUT is Disconnected from VIN During Shutdown n 16mm ×16mm × 8.34mm BGA Package #Power-supply