I’ll update the terminal metadata so the symbol uses parametric style and each pin family is assigned to a datasheet-based section, then verify the section assignments on representative pins.

The first pass updated the functional pin groups, but the duplicate power/ground ball names need explicit per-ball updates. I’m applying those now so every repeated VIN/VOUT/GND/SGND/SW ball receives the same parametric/section metadata.

Done. I converted the symbol terminals to parametric style and assigned datasheet-based sections across the pin groups: Ground, Power Input, Power Output, Switch Nodes, Current Sense / Monitor, Feedback / Compensation, Frequency / Synchronization, Mode / Enable / Status, and Internal Bias / Auxiliary Supply.

I also verified representative repeated pins, including late-list GND/VIN/VOUT entries, and confirmed the section/style metadata is present.

I’ll add Pin Group and Pin Orientation metadata to every terminal, grouping by datasheet function and using consistent orientations for parametric symbol layout, then verify representative pins across each group.

Done. I added Pin Group and Pin Orientation properties across the LTM4712 pins.

Verified examples include repeated GND/VIN entries and functional pins across the current sense, feedback/compensation, frequency/sync, mode/status, and internal bias groups.