Port Control With Power Delivery USB 2.0/USB 3.1 3.7V T/R 9-Pin DSBGA #commonpartslibrary #integratedcircuit #usb #interface

400mA Step-Up DC/DC Converter with Maximum Power Point Control and 250mV Start-Up 12-MSOP #CommonPartsLibrary #IntegratedCircuits #BatteryChargers #LTC3105

The BQ25750 is a wide input voltage, switched-mode buck-boost Li-Ion, Li-polymer, or LiFePO 4 battery charge controller with direct power path control. The device offers high-efficiency battery charging over a wide voltage range with accurate charge current and charge voltage regulation, in addition to automatic charge preconditioning, termination, and charge status indication. The device integrates all the loop compensation for the buck-boost converter, thereby providing a high density solution with ease of use. In reverse mode, the device draws power from the battery and regulates the SYS terminal voltage.

The TPS54531DDA is a high-efficiency step-down switching regulator designed for converting higher input voltages into regulated lower output voltages. It integrates a power MOSFET, control circuitry, and protection features into a compact package, enabling simplified power supply design for a wide range of industrial, consumer, communication, and embedded applications. The device utilizes current-mode control architecture to provide fast transient response, stable operation, and straightforward loop compensation. It supports a wide input voltage range and delivers efficient power conversion while minimizing external component count. Built-in protection mechanisms enhance system reliability by safeguarding against fault conditions such as overcurrent, undervoltage, and thermal overload. The TPS54531DDA is commonly used in distributed power systems, industrial controllers, networking equipment, telecommunications hardware, battery-powered devices, and embedded computing platforms requiring efficient voltage regulation. Features Integrated high-side power MOSFET High-efficiency buck regulator architecture Wide input voltage operating range Current-mode control operation Adjustable output voltage capability Fast transient response performance Internal soft-start functionality Cycle-by-cycle current limiting protection Thermal shutdown protection Undervoltage lockout protection Frequency compensation support Low standby current operation Compact surface-mount package Suitable for industrial temperature environments Electrical Characteristics Step-down DC/DC conversion topology Fixed switching frequency operation Adjustable output regulation High conversion efficiency across load conditions Stable operation with ceramic output capacitors Integrated power switch architecture Low output voltage ripple performance High load regulation accuracy Applications Industrial automation systems Embedded processors and microcontrollers Communication equipment Networking hardware Distributed power architectures Point-of-load regulators Consumer electronic products Measurement and instrumentation equipment Battery-powered systems Digital control platforms Package Information Package Type: SO PowerPAD package Surface-mount assembly compatible Thermally enhanced package construction Optimized for automated PCB manufacturing Compact footprint for space-constrained designs #commonpartslibrary #integratedcircuit #powermanagement #powersupply #buckconverter #dcdcconverter #switchingregulator #voltageregulator #embeddedsystems #industrialelectronics #powerelectronics #texasinstruments #energyefficiency #electronicsdesign #powersupplycontroller

TPS25940ARVCR is an integrated eFuse power protection device from Texas Instruments designed to provide advanced power path management and circuit protection for embedded and industrial electronic systems. The device combines power MOSFET control, inrush current limiting, overcurrent protection, overvoltage protection, and thermal shutdown features into a compact integrated solution for reliable power distribution. This eFuse controller is optimized for hot-swap applications, USB power interfaces, industrial control systems, communication equipment, and embedded platforms requiring controlled power sequencing and fault isolation. It enables safe startup behavior, adjustable current limiting, and fast fault response to protect sensitive downstream circuitry from abnormal operating conditions. The TPS25940ARVCR supports programmable protection thresholds and provides robust system reliability by reducing damage risks caused by short circuits, excessive load current, or transient voltage events. Its compact surface-mount package and high integration level simplify PCB layout and minimize external component requirements in modern power management architectures. #commonpartslibrary #efuse #powermanagement #circuitprotection #texasinstruments #hotswapcontroller #embeddedhardware #powersupply #industrialelectronics #electronicscomponents

OR Controller P-Channel 1:1 SC-70-6 The LM66100DCKR is an ideal diode and power path management device manufactured by Texas Instruments. This integrated circuit is designed to provide low-loss reverse polarity protection and automatic power path control for low-voltage DC power systems. By utilizing an integrated low-resistance MOSFET architecture, the device significantly reduces forward voltage drop and power dissipation compared to conventional Schottky diodes. The device supports automatic source selection, reverse current blocking, and efficient power OR-ing functionality, making it suitable for battery-powered devices, USB-powered electronics, industrial embedded systems, portable equipment, and redundant power supply architectures. Its ultra-low forward voltage characteristics improve overall system efficiency and help extend battery operating life in portable applications. The LM66100DCKR is optimized for compact embedded designs requiring efficient power routing, input protection, and seamless power source switching while minimizing thermal losses and PCB footprint requirements. Engineering Specification Device Type Ideal diode and power path protection IC Power Management Function Reverse current blocking and automatic power path control Switching Technology Integrated low-resistance MOSFET architecture Reverse Protection Reverse polarity and reverse current protection Forward Voltage Characteristics Ultra-low forward voltage drop for high-efficiency operation Power Path Features Automatic source selection and power OR-ing support Efficiency Characteristics Reduced conduction loss compared to conventional diode solutions Input Characteristics Designed for low-voltage DC power rail operation Thermal Characteristics Low thermal dissipation due to efficient MOSFET conduction Protection Features Reverse current blocking Reverse polarity protection Power path isolation Fault-tolerant operation Package Type SC70 surface-mount package Mounting Style Surface mount technology Applications Battery-powered electronics USB-powered systems Power multiplexing Portable devices Embedded systems Industrial electronics Redundant power supplies Power OR-ing circuits IoT hardware Low-power electronic systems Manufacturer Texas Instruments #commonpartslibrary #idealdiode #powermanagement #reversepolarityprotection #powerpathcontroller #texasinstruments #powerelectronics #embeddedhardware #portableelectronics #surfaceountcomponents #electronicsdesign #powersupply #usbpower #batterypowered #industrialelectronics

CONN HEADER TH R/A 6POS 2.5mm The M2557R-2x3-N0 is a 2×3 position (6-pin) right-angle wire-to-board header connector from XFCN. It is part of the 2.50 mm pitch M2557 series, commonly used for power and signal connections in consumer electronics, industrial control boards, power supplies, battery systems, and embedded devices. The connector is designed for through-hole PCB mounting and mates with the corresponding P2557 series housing and crimp terminals. Key Features Connector Type: Wire-to-board male header Positions: 6 pins (2 rows × 3 pins) Pitch: 2.50 mm Mounting Style: Through-hole, right-angle Current Rating: 3 A per contact Voltage Rating: 250 V AC/DC Operating Temperature: −25°C to +85°C Contact Material: Brass or phosphor bronze contacts Housing Material: Nylon 66, UL94V-0 flame-retardant Contact Resistance: 30 mΩ max Insulation Resistance: 1000 MΩ minimum Withstanding Voltage: 800 V AC for 1 minute RoHS Compliant Typical Applications Power distribution connections Battery-powered equipment Home appliances Industrial control systems Development boards and embedded electronics General-purpose signal and power interconnects Mechanical Description Configuration: 2 rows × 3 positions PCB Orientation: Right-angle (90°) Mating Housing: P2557 series receptacle housing Pitch Between Pins: 2.50 mm #CommonPartsLibrary #Connector

3 Position Wire to Board Terminal Block Horizontal with Board 0.200" (5.08mm) Through Hole The 1730405 is a PCB terminal block from Phoenix Contact, belonging to the MKDS 2,5 series. It is designed for secure screw-type wire-to-board connections, commonly used in industrial control systems, power distribution, and PCB interface applications. This component provides a reliable mechanical and electrical connection between wires and printed circuit boards (PCB) with a standard 5.08 mm pitch. Key Features 3-position PCB terminal block Compact single-row configuration for signal or power connections Screw connection technology Secure and vibration-resistant wire termination Standard 5.08 mm pitch Compatible with common industrial PCB layouts Rated electrical performance Nominal voltage up to 400 V Nominal current up to 24 A (with proper conductor size) Wire compatibility Solid and stranded wires: 0.14 mm² to 2.5 mm² AWG range: approximately 30–12 AWG High insulation rating Insulating material: PA (Polyamide) Flame class: UL 94 V-0 High surge voltage capability Up to 4 kV surge rating Through-hole PCB mounting Designed for soldering into PCB for stable mechanical retention Industrial-grade durability Suitable for harsh environments and long-term use Typical Applications Industrial automation systems Power supply and distribution boards Control panels Embedded PCB wiring interfaces Electrical instrumentation systems 1x3 terminal block #CommonPartsLibrary #Connector #Terminal block

Mobile Communications PMIC 30-WLP (2.62x3.07) The MAX77958EWV+ is a highly integrated USB Type-C and USB Power Delivery (USB PD) controller designed for portable and battery-powered electronic systems. Manufactured by Analog Devices/Maxim Integrated, the device provides complete USB Type-C Configuration Channel (CC) detection, USB PD protocol management, and power path control functionality within a compact wafer-level package. It is optimized for applications requiring flexible USB charging, power negotiation, and accessory support while minimizing external component count and system complexity. The device integrates a USB Type-C Port Controller (TCPC), Power Delivery Policy Engine, BC1.2 charger detection, VCONN management, dead battery support, and integrated protection features. It supports both sink and dual-role power operation, enabling intelligent power negotiation between connected devices and external power adapters. The controller communicates with the host processor through an I²C interface, allowing firmware-based configuration and monitoring. The MAX77958EWV+ is intended for smartphones, tablets, wearable devices, portable computing platforms, docking stations, embedded systems, and other USB Type-C enabled consumer electronics requiring reliable power delivery and advanced USB connectivity management. Electrical Characteristics The device operates from a low-voltage supply optimized for portable electronic systems. It supports USB Type-C and USB Power Delivery specifications with integrated CC line monitoring and protocol handling. The controller includes internal voltage regulation and protection mechanisms to ensure reliable operation during attachment, detachment, and fault conditions. The integrated USB Power Delivery engine supports multiple power profiles and dynamic voltage negotiation. The device supports sink functionality for charging applications and can be configured for dual-role operation depending on system requirements. Low standby current operation enables efficient battery-powered system implementation while maintaining USB attach detection capability. Functional Features Integrated USB Type-C Port Controller compliant with USB Type-C standards USB Power Delivery protocol engine supporting power negotiation and role management Support for sink and dual-role power configurations Integrated BC1.2 charger detection capability Dead battery support for autonomous attachment detection Integrated VCONN switch and cable orientation detection Automatic CC pin monitoring and cable attach detection I²C interface for host processor communication and configuration Integrated interrupt generation for event handling Support for programmable power profiles and policy management Internal fault monitoring and protection features Compact wafer-level package suitable for space-constrained applications Protection Features Overvoltage monitoring on USB Type-C interface lines Short-circuit protection support Thermal protection and fault detection mechanisms Integrated VCONN current limiting ESD protection for external USB interface connections Safe attach and detach handling during cable insertion events Interface Characteristics USB Type-C CC interface compliant with USB Type-C specifications I²C serial communication interface for host control Interrupt output for event notification Integrated support for orientation detection and cable identification Programmable configuration registers accessible through I²C Package Information Package type is wafer-level package optimized for compact portable designs RoHS compliant and suitable for lead-free manufacturing processes Designed for automated surface-mount assembly Applications Smartphones and mobile devices Tablet computers Wearable electronics Portable battery-powered equipment USB Type-C charging systems Embedded USB PD controllers Docking stations and accessories Consumer electronic products requiring USB Type-C connectivity #commonpartslibrary #integratedcircuit #powermanagement #mobilecommunications

The SI2300 is a N-channel enhancement-mode MOSFET designed for efficient switching and power management applications. Fabricated using advanced trench MOS technology, it delivers low on-state resistance, fast switching performance, and high current handling capability within a compact surface-mount package. The device is widely used in load switching, battery-powered equipment, DC-DC converters, motor control circuits, power distribution systems, and general-purpose switching applications where efficiency and space optimization are critical. Features N-channel enhancement-mode MOSFET Low on-state resistance for reduced conduction losses Fast switching characteristics Low gate charge for efficient drive operation Compact surface-mount package High current carrying capability Low power dissipation design Optimized for battery-operated systems Suitable for high-speed switching applications RoHS-compliant and lead-free construction Applications Power management circuits Load switching systems Battery protection modules Portable electronic devices DC-DC converter circuits Motor drive applications Power distribution networks Embedded control systems Consumer electronics Industrial automation equipment Electrical Characteristics Low drain-to-source on-resistance High drain current capability Low gate threshold voltage Fast turn-on and turn-off response Low gate capacitance High switching efficiency Low leakage current characteristics Enhanced thermal performance Stable operation across specified temperature ranges Reliable avalanche and transient performance Mechanical Characteristics Surface-mount package construction Compact footprint for high-density PCB layouts Suitable for automated assembly processes Compatible with standard reflow soldering methods Tape-and-reel packaging availability Robust package integrity for production environments Environmental Characteristics Industrial-grade reliability Resistance to mechanical shock and vibration within specification limits Moisture-resistant package design Suitable for operation in demanding electronic environments Compliant with RoHS and environmental regulations Long operational lifetime under recommended operating conditions #commonpartslibrary #mosfet #nchannelmosfet #powermanagement #powerswitching #semiconductor #transistor #loadswitch #dcdcconverter #batteryprotection #embeddedsystems #industrialelectronics #consumerelectronics #smtcomponent #electronicsdesign

Dip Switch SPST 2 Position Surface Mount Slide (Standard) Actuator 25mA 24VDC The 218-2LPSTJ is a two-position pluggable terminal block connector designed for secure wire-to-board connections in industrial and commercial electronic applications. It features a screw-clamp termination mechanism, allowing reliable and reusable connections for solid or stranded wires. The connector is typically used in power distribution, control systems, and signal wiring where ease of maintenance and field wiring is required. Key Features Pluggable terminal block, two positions Screw-clamp wire termination for secure connection Standard pitch suitable for common PCB layouts Removable plug for easy installation and maintenance Designed for solid and stranded wire compatibility High reliability for industrial environments Mechanical Specifications Number of Positions: 2 Pitch: 5.08 mm Mounting Type: Through-hole (header) with mating plug Wire Entry: Side entry Wire Gauge Range: Typically 24 AWG to 12 AWG (manufacturer dependent) Housing Material: High-temperature thermoplastic Color: Typically green Electrical Specifications Rated Voltage: Up to 300 V (UL rating typical) Rated Current: Up to 10–15 A (depending on wire size and conditions) Contact Resistance: Low resistance, suitable for power and signal transmission Insulation Resistance: High insulation resistance under standard conditions Environmental Specifications Operating Temperature Range: −40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Power supply connections Industrial control systems HVAC equipment Automation and instrumentation PCB-based terminal interfaces Mating / Compatibility Compatible with corresponding 2-position pluggable terminal block headers with 5.08 mm pitch Designed for repeated mating cycles without degradation #commonpartslibrary #switch #dip #spst

2 Position Wire to Board Terminal Block Vertical with Board 0.138" (3.50mm) Surface Mount The 1250360000 is a high-quality PCB terminal block manufactured by Weidmüller, designed for secure and reliable wire-to-board connections. It features a robust screw-clamp connection system that ensures strong mechanical retention and excellent electrical conductivity. This component is widely used in industrial control systems, power distribution modules, and automation equipment where dependable field wiring is required. The terminal block is designed for easy installation on printed circuit boards and supports solid or stranded wires. Its durable housing material provides resistance to environmental stress, making it suitable for long-term operation in demanding applications. Key Features Screw clamp connection for secure wire termination Through-hole PCB mounting for strong mechanical stability High current carrying capability مقاust insulating housing with flame-retardant properties واضحة labeling area for easy identification Suitable for industrial and automation applications Electrical Characteristics Rated Voltage: 300 V (typical, verify datasheet) Rated Current: Up to 10–16 A (depending on wire size) Contact Resistance: Low (optimized for power applications) Insulation Resistance: High (>10⁸ Ω typical) Mechanical Characteristics Mounting Type: Through-Hole PCB Connection Type: Screw Clamp Number of Positions: Typically 2–12 positions (variant dependent) Wire Gauge Range: ~24 AWG to 12 AWG (approx.) Pitch: Typically 5.00 mm or 5.08 mm (verify exact variant) Material Information Housing Material: Polyamide (PA), flame-retardant (UL94 V-0) Contact Material: Copper alloy Contact Plating: Tin-plated Environmental Characteristics Operating Temperature Range: -40°C to +105°C (typical) Flammability Rating: UL94 V-0 RoHS Compliant: Yes Applications Industrial control systems Power supply units Automation and PLC systems Signal and power distribution boards Building and factory wiring interfaces Notes Exact electrical ratings and pitch may vary depending on the specific configuration under this series. Always refer to the official Weidmüller datasheet for precise parameters before design integration. #commonpartslibrary #connector #terminalblock

Connector Header Through Hole, Right Angle 10 position 0.100" (2.54mm) The 1761607-3 is a pluggable terminal block connector manufactured by TE Connectivity. It is designed for reliable wire-to-board connections in industrial and electronic applications. The connector supports screw-clamp termination, allowing secure and reusable wire connections. Its modular design enables easy installation and maintenance, making it suitable for control systems, power distribution, and signal interfacing. Key Features Pluggable terminal block connector Screw-clamp wire termination Reliable mechanical and electrical connection Modular and field-serviceable design Suitable for industrial environments Electrical Characteristics Rated voltage: up to 300 V (typical, application dependent) Rated current: up to 8 A (depending on wire size and conditions) Contact resistance: low contact resistance for stable conductivity Insulation resistance: high insulation resistance Mechanical Characteristics Number of positions: 3 Pitch: 3.5 mm Termination type: screw clamp Wire size range: typically 26 AWG to 16 AWG Mounting type: through-hole PCB Mating type: pluggable header interface Material Properties Housing material: high-temperature thermoplastic Contact material: copper alloy Contact plating: tin plating Flammability rating: UL94 V-0 Environmental Specifications Operating temperature range: −40°C to +105°C RoHS compliant Suitable for industrial applications Applications Industrial control systems Power supply connections Signal interface modules Automation equipment HVAC and building control systems Compliance & Standards RoHS compliant UL recognized (application dependent) IEC standard compliant terminal block design #commonpartslibrary #connector #header

Buck Switching Regulator IC Positive Fixed 3.3V 1 Output 2A 8-SOIC (0.154", 3.90mm Width) # L6982N33DR ## General Description The L6982N33DR is a high-efficiency synchronous step-down switching regulator manufactured by STMicroelectronics. It is designed to provide a fixed regulated output voltage from a wide input voltage range while maintaining excellent conversion efficiency and low power dissipation. The device integrates high-side and low-side power MOSFETs, control circuitry, protection features, and compensation functions within a compact package, reducing external component count and simplifying power supply design. Its robust architecture makes it suitable for industrial automation systems, distributed power architectures, telecommunications equipment, embedded systems, consumer electronics, smart devices, and battery-powered applications requiring efficient DC-to-DC voltage conversion. ## Key Features ### Power Conversion Architecture * Synchronous buck regulator topology * Fixed output voltage regulation * Integrated power MOSFETs * High-efficiency power conversion * Optimized switching performance * Reduced external component requirements ### Electrical Characteristics * Wide input voltage operating range * Stable output voltage regulation * High conversion efficiency * Low standby power consumption * Fast transient response * Low output ripple performance ### Control Features * Current-mode control architecture * Internal compensation circuitry * Soft-start functionality * Frequency synchronization capability * Stable operation under varying load conditions ### Protection Features * Overcurrent protection * Short-circuit protection * Thermal shutdown protection * Undervoltage lockout protection * Safe startup operation * Enhanced system reliability ### Power Management * Low-power operating modes * Energy-efficient design * Suitable for battery-powered systems * Optimized thermal performance * Reduced power dissipation ### Package Characteristics * Surface-mount package * Compact footprint * Automated assembly compatible * High-density PCB design support * Industrial-grade packaging ### Material Construction * Monolithic integrated power management solution * Lead-free package materials * RoHS-compliant construction * High-reliability semiconductor technology ### Environmental Characteristics * Suitable for industrial operating environments * Long operational service life * Reliable continuous operation * Robust thermal performance ### Application Areas * Industrial Automation Equipment * Embedded Systems * Microcontroller Power Supplies * FPGA and Processor Power Rails * Telecommunications Equipment * Smart Metering Systems * Consumer Electronics * Building Automation Systems * Distributed Power Architectures * Battery-Powered Devices * IoT Products * Power Management Modules ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade Power Management Solution ## Manufacturer STMicroelectronics ## Product Family L6982 Synchronous Step-Down Switching Regulator Series #L6982N33DR #STMicroelectronics #BuckConverter #DCtoDCConverter #SwitchingRegulator #PowerManagement #PowerSupplyDesign #EmbeddedSystems #IndustrialElectronics #VoltageRegulator #PowerElectronics #IoTDevices #ElectronicsEngineering #PCBDesign #SMPS

2 Position Wire to Board Terminal Block Horizontal with Board 0.150" (3.81mm) Through Hole ## Engineering Specification ## General Description The **1727010** is a Phoenix Contact **MKDS series PCB terminal block** designed for secure wire-to-board electrical connection in printed circuit board assemblies. It provides a compact screw-clamp termination interface for connecting external conductors to PCB circuitry. The component is suitable for industrial electronics, automation equipment, control modules, power interfaces, instrumentation, and general electronic assemblies requiring reliable field wiring termination. ## Device Identification Manufacturer Part Number: **1727010** Manufacturer: **Phoenix Contact** Product Name: **MKDS 1/ 2-3,81** Product Series: **MKDS** Product Line: **COMBICON Terminals** Device Category: **Connector and Interconnect Component** Device Type: **PCB Terminal Block** Connection Type: **Wire-to-Board Terminal Block** Termination Method: **Screw Connection with Tension Sleeve** Mounting Type: **Through-Hole PCB Mount** ## Functional Description The device functions as a fixed PCB terminal block that allows external wires to connect directly to the printed circuit board. The screw-clamp mechanism provides both mechanical conductor retention and electrical continuity between the field wiring and PCB circuit. This makes the component suitable for applications where wiring must be secure, serviceable, and accessible during installation or maintenance. ## Mechanical Description The terminal block uses a compact housing with side-entry conductor access and through-hole solder pins for stable PCB attachment. Its construction supports organized wire routing and practical access for conductor insertion and screw tightening. The design is suitable for compact board layouts where reliable field wiring connection is required. ## Electrical Description The component is intended for signal and low-voltage power connection applications within the manufacturer’s specified electrical ratings. It provides stable electrical contact when used with compatible conductor sizes, correct wire preparation, and proper screw tightening torque. ## Material and Contact Description The terminal block uses an insulating housing with internal conductive contact elements that transfer current from the inserted conductor to the soldered PCB pins. The screw connection with tension sleeve helps maintain reliable contact pressure and secure conductor retention during normal operating conditions. ## Mounting and Assembly Description The **1727010** is intended for through-hole solder mounting on a printed circuit board. The PCB layout should follow the manufacturer’s recommended hole size, pad pattern, spacing, and soldering guidance. The component should be positioned to allow safe wire insertion, screwdriver access, and adequate clearance from nearby components or enclosure walls. ## Application Suitability The device is suitable for industrial control boards, automation modules, power supply interfaces, relay boards, instrumentation equipment, sensor wiring interfaces, building control systems, communication hardware, and other electronic products requiring secure PCB wire termination. ## Design Considerations The design should account for conductor size compatibility, current requirement, voltage rating, tightening torque, creepage and clearance spacing, solder joint strength, wire routing, and service access. The terminal block should not be used beyond the manufacturer’s specified electrical, mechanical, or environmental limits. ## Hashtags #commonpartslibrary #terminalblock #pcbterminalblock #phoenixcontact #mkds #combicon #wiretoboard #screwterminal #fixedterminalblock #throughholecomponent #soldermount #connector #interconnect #fieldwiring #industrialelectronics #automationequipment #controlsystems #powerinterface #pcbdesign #hardwaredesign #electronicscomponents #electronicparts #engineeringparts #componentlibrary #electronicsengineering

N-Channel 68 V 80A (Tc) 190W (Tc) Through Hole TO-220 # STP75NF68 ## General Description The STP75NF68 is a high-performance N-channel power MOSFET manufactured by STMicroelectronics and designed for efficient power switching and power management applications. Utilizing advanced STripFET™ power MOSFET technology, the device offers low on-state resistance, high current-handling capability, and excellent switching performance. Its rugged construction and optimized electrical characteristics make it suitable for industrial automation systems, motor control applications, power supplies, battery-powered equipment, DC-DC converters, automotive-support systems, and general-purpose power electronics. The device is engineered to provide high efficiency, reduced power losses, and reliable operation in demanding switching environments. ## Key Features ### Power MOSFET Architecture * N-channel enhancement-mode MOSFET * Advanced STripFET™ technology * Low on-state resistance * High-current switching capability * Optimized power conversion efficiency * Fast switching performance ### Electrical Characteristics * Low conduction losses * High-current carrying capability * Low gate drive requirements * Stable switching operation * Efficient energy transfer performance * Suitable for high-power electronic systems ### Switching Performance * Fast turn-on characteristics * Fast turn-off characteristics * Reduced switching losses * High-frequency operation support * Reliable dynamic performance * Enhanced power management capability ### Thermal Characteristics * High power dissipation capability * Efficient thermal transfer performance * Suitable for heatsink integration * Reliable operation under continuous load conditions * Stable thermal behavior in demanding applications ### Protection and Reliability * Avalanche-rated performance * Rugged semiconductor construction * High reliability under transient conditions * Long operational service life * Enhanced electrical robustness ### Package Characteristics * Through-hole power package * Industry-standard footprint * Easy integration into power electronic assemblies * Suitable for industrial and commercial applications * Compatible with automated and manual assembly processes ### Material Construction * Advanced silicon power MOSFET technology * High-reliability semiconductor materials * RoHS-compliant construction * Lead-free compatible package * Industrial-grade manufacturing quality ### Environmental Characteristics * Suitable for industrial operating environments * Reliable performance under continuous operation * Resistant to electrical and thermal stress * Long-term operational stability ### Application Areas * Motor Control Systems * Switching Power Supplies * DC-DC Converters * Battery Management Systems * Industrial Automation Equipment * Power Distribution Systems * Renewable Energy Equipment * Inverter Applications * Embedded Power Electronics * Automotive Electronic Systems * Uninterruptible Power Supplies * General Power Switching Circuits ### Compliance * RoHS Compliant * Lead-Free Compatible * Industrial-Grade Power Semiconductor Solution ## Manufacturer STMicroelectronics ## Product Family STripFET™ N-Channel Power MOSFET Series #STP75NF68 #STMicroelectronics #PowerMOSFET #NChannelMOSFET #STripFET #PowerElectronics #MotorControl #SwitchingPowerSupply #DCDCConverter #BatteryManagement #IndustrialElectronics #PowerManagement #EmbeddedSystems #ElectronicsEngineering #PowerSemiconductor

8 Position Wire to Board Terminal Block Horizontal with Board 0.197" (5.00mm) Through Hole 39593-3008 0395933008 is a PCB-mount terminal block from the Molex Eurostyle ESE 39593 series. It is an 8-position, 5.00 mm pitch, through-hole wire-to-board terminal block featuring screw-clamp wire termination for secure field wiring connections. Designed for industrial and power-distribution applications, it supports up to 15 A current and 300 V voltage ratings, making it suitable for control systems, power supplies, HVAC equipment, and industrial automation products. Key Features 8-position terminal block 5.00 mm pitch Through-hole PCB mounting Horizontal (side-entry) wire access Screw rising cage clamp termination Rated up to 15 A current Rated up to 300 V Supports 14–22 AWG wire sizes Tin-plated brass contacts Polyamide (PA66) housing Operating temperature: -40°C to +105°C RoHS compliant #CommonPartsLibrary #Connector #Molex #Eurostyle #TerminalBlock #WireToBoard #ThroughHole #IndustrialConnector #ScrewTerminal #PCBConnector #PowerConnection #Automation #0395933008

3 Position Wire to Board Terminal Block 45° (135°) Angle with Board 0.150" (3.81mm) Through Hole, Kinked Pin The 691412320003 is a pluggable terminal block connector designed for secure wire-to-board power and signal interconnection in industrial and embedded electronic systems. Manufactured by Würth Elektronik, this connector provides reliable field wiring capability with a compact footprint suitable for PCB mounting applications. The device supports screw-clamp wire termination, enabling dependable electrical contact and easy maintenance in control systems, power distribution modules, automation equipment, and general-purpose electronic assemblies. Its modular pluggable structure allows convenient installation and replacement while maintaining stable mechanical retention and electrical performance. Engineering Specification Product Type: Pluggable terminal block connector Manufacturer: Würth Elektronik Manufacturer Part Number: 691412320003 Connector Style: Plug component for mating terminal block system Mounting Type: Through-hole PCB mount Number of Positions: Three Pitch Spacing: 3.50 mm Wire Termination Method: Screw clamp termination Wire Entry Orientation: Horizontal Contact Material: Copper alloy Contact Plating: Tin plated Housing Material: High-temperature thermoplastic Housing Color: Green Flammability Rating: UL94 V-0 Rated Voltage: Suitable for low-voltage industrial and control applications Rated Current: Designed for moderate power and signal transmission Operating Temperature Range: Industrial-grade operating temperature capability Mating Style: Pluggable locking terminal interface Application Use: Industrial controls, power interfaces, embedded systems, automation equipment, and field wiring connections Compliance: RoHS compliant and lead-free compatible #commonpartslibrary #connector #terminalblock

Buck-Boost Switching Regulator IC Positive Programmable 0.8V 1 Output 8A 21-PowerVFQFN The TPS552892RYQR is a highly integrated synchronous buck-boost DC-DC converter designed for applications requiring regulated output voltage operation from input sources that may be above, below, or equal to the target output voltage. The device supports seamless transition between buck, boost, and buck-boost operating modes, enabling stable power delivery across wide input voltage ranges typically encountered in battery-powered and portable electronic systems. The converter integrates low-resistance power MOSFETs, control circuitry, compensation functions, and protection features within a compact package to minimize external component count and simplify power supply design. It is optimized for high efficiency operation over varying load conditions while maintaining low quiescent current and fast transient response. The device supports programmable output voltage configuration and offers flexible control interfaces suitable for embedded processors, industrial controllers, portable instrumentation, communication systems, consumer electronics, and USB-powered applications. Internal soft-start and current limiting mechanisms improve startup reliability and protect both the converter and downstream circuitry during fault conditions. The TPS552892RYQR includes comprehensive protection functions including overcurrent protection, thermal shutdown, undervoltage lockout, output overvoltage protection, and short-circuit protection. The converter architecture is designed to support compact PCB layouts while maintaining stable operation and low electromagnetic interference characteristics. The device is supplied in a compact surface-mount package intended for automated assembly and high-density power management designs where board space, efficiency, and thermal performance are critical considerations. Engineering Specification Device Type Synchronous buck-boost DC-DC switching regulator. Input Characteristics Supports wide input voltage operation for battery, adapter, and distributed power rail applications. Capable of operating with input voltages above or below the regulated output voltage while maintaining continuous regulation. Output Characteristics Provides programmable regulated output voltage with high conversion efficiency and fast transient response. Supports operation across varying load conditions with stable output regulation. Switching Architecture Integrated synchronous switching topology with automatic transition between buck, boost, and buck-boost operating modes. Internal MOSFET integration reduces external component requirements and improves efficiency. Efficiency Performance Optimized for high power conversion efficiency across broad operating conditions using low-resistance internal switching elements and advanced control techniques. Control Features Incorporates internal compensation, soft-start control, enable functionality, and programmable operating parameters suitable for embedded power management systems. Protection Features Includes overcurrent protection, short-circuit protection, thermal shutdown, undervoltage lockout, and output overvoltage protection to improve system reliability and fault tolerance. Thermal Characteristics Designed for efficient thermal dissipation in compact PCB layouts with exposed-pad package construction to support improved heat transfer. Package Information Provided in a compact leadless surface-mount package suitable for automated PCB assembly and space-constrained applications. Application Areas Suitable for portable electronics, battery-powered systems, USB power delivery subsystems, industrial embedded systems, communication equipment, handheld instruments, and general-purpose power conversion applications. #CommonPartsLibrary #IntegratedCircuit #PowerManagement #Voltage-regulator #Switching-regulator #TPS552892

Buck Switching Regulator IC Positive Fixed 5V 1 Output 1A SOT-23-6 The LMR50410Y5FQDBVRQ1 (part of the LMR50410-Q1 family from Texas Instruments) is a synchronous step-down (buck) DC-DC converter designed for automotive and industrial power applications. It operates over a wide input voltage range of 4 V to 36 V and can deliver up to 1 A output current, making it suitable for converting higher, unregulated voltages into stable lower voltages (e.g., 5 V or 3.3 V rails). The device integrates power switches, control circuitry, and compensation internally, allowing simple design with minimal external components and a compact PCB footprint. Key Features Power & Performance Wide input voltage range: 4 V to 36 V Output current: up to 1 A High switching frequency: 2.1 MHz (enables small inductors) High efficiency with PFM (light load) and FPWM (constant frequency) options Integration & Ease of Use Synchronous rectification (integrated high-side & low-side MOSFETs) Internal compensation (no complex external tuning) Minimal external components required Small SOT-23-6 package for compact designs Protection & Reliability Cycle-by-cycle current limit Short-circuit protection (hiccup mode) Thermal shutdown protection Undervoltage lockout (UVLO) ±1% reference voltage accuracy Automotive & Industrial Capability AEC-Q100 qualified (automotive grade) Operating temperature: Ambient: up to 125°C Junction: up to 150°C Designed for rugged automotive environments Additional Features Soft-start for controlled startup Precision enable pin for system control Monotonic startup with pre-biased output Available in fixed output (e.g., 5 V) variants Typical Applications Automotive electronics (ADAS, infotainment, lighting) Industrial power supplies Distributed power systems General-purpose DC-DC regulation #commonpartslibrary #integratedcircuit #powermanagement #voltageregulator