I2C to dual PWM controller. The LED-Warrior18, manufactured by Code Mercenaries, is an I2C to dual channel PWM LED driver specifically designed to provide seamless brightness control for LED applications. This component, available in SOIC8 package (LW18-S) and as a ready-to-use module (LW18-01MOD), offers dual 16-bit PWM outputs with a dimming range from 0.001% to 100% and operates at a PWM frequency of 730 Hz. It supports programmable period lengths for higher-frequency or lower-resolution operation and includes an 8-bit data to logarithmic mapping feature for smoother dimming operations with just 256 steps. The LED-Warrior18 is engineered for minimal external circuitry with a 5V power supply requirement, offering ease of use in various lighting applications. It also features a sync mode for synchronized control of multiple units and customizable power-on status settings, making it highly versatile for standalone operations or integrated systems. Additionally, custom variants of both the chip and module are available, catering to specific application needs. The module version, LW18-01MOD, simplifies integration by including terminal blocks and supporting up to 4A load sink current for each output. The LED-Warrior18 stands out for its straightforward interface and operational flexibility, providing a comprehensive solution for advanced LED dimming and control projects.

I want to create a standard interface from my PCBs to my test equipment. My equipment: PSU: Rigol DP832 Scope: Siglent SDS 1202X-E WaveGen: Siglent SDG810 Logic Analyzer: DSLogic Plus 400MHz VNA: NanoVNA V2 6 scope channels (4 1X, 2 10X) 8 Logic Analyzer channels 1 Wavegen channel 4 Power Nets ( 2 pins each) (tie power nets to oscilloscope inputs) #template #testing

This ADM3054BRWZ-RL7-based reference design is a CAN bus transceiver circuit, providing reliable data communication over the CAN network. The design features a range of capacitors and resistors to ensure signal integrity, and a NUP2105L for voltage protection. It's ideal for applications requiring reliable data communication in an automotive or industrial environment. #referenceDesign #project #CANbus #interface #transceiverCircuit #ADM3054 #ADM3054BRWZ-RL7 #referenceDesign #canbus #texas-instruments #template #reference-design #reference-design

Smart Thermostat design using an ESP32 module for WiFi connectivity and a BME680 sensor for environmental monitoring. The user interface includes an E-ink display and an encoder for settings adjustment. Power: USB and Battery Movement sensor

10/100 Base-T/TX PHY Ethernet controller that supports PoE with SPI Interface. Based on W5500. Can be used as PoE injector. #project #referenceDesign #template #w5500 #PoE #EtherNet #RJ5

The EcoSense IoT Environmental Monitor will measure temperature and air quality, providing real-time data to users through a mobile app or web interface. The device will be compact, easy to install, and user-friendly, offering insights into the indoor environmental conditions to promote health and well-being. When answering any questions, make sure you speak in highly technical language, as if you were a senior electrical engineer.

Reference design for PCM5102A 2VRMS DirectPath™, 112dB Audio Stereo DAC with 32-bit, 384kHz PCM Interface #project-template #DAC #audio #project

Reference design for PCM5102A 2VRMS DirectPath™, 112dB Audio Stereo DAC with 32-bit, 384kHz PCM Interface #project-template #DAC #audio #project

This ISO1042BDWR-based reference design is a CAN bus transceiver circuit, providing reliable data communication over the CAN network. The design features a range of capacitors and resistors to ensure signal integrity, and a NUP2105L for voltage protection. It's ideal for applications requiring reliable data communication in an automotive or industrial environment. #referenceDesign #project #CANbus #interface #transceiverCircuit #ISO1042 #ISO1042BDWR

The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #SeeedStudio #XIAO #LoRa #RP2040 #IoT

The "LoST" Board is a Node that interfaces Industrial Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

This breakout board features the STMPE610, which has both I2C and SPI interfaces available. There is also an interrupt pin that you can use to indicate when a touch has been detected to your microcontroller or microcomputer.

This project designs a Linux Single Board Computer using STM32MP157FAC1, featuring DDR memory, a power management IC, USB and SD card interfaces, and essential user controls, aimed at versatile embedded applications.

Arduino-compatible SMC3/SimTools 3-DOF motion controller for three 12 V worm-drive motors, Hall feedback sensors, dual USB-C interfaces, and E-stop safety input.

Ziplink Edge Controller: 12-24 V input controller with PIC32MZ MCU, USB-C service port, WiFi/BLE UART module, QR/NFC UART interfaces, RS-232/RS-485 ports, and three protected low-side load outputs. Imported KiCad source is being evaluated for schematic reconstruction and exact part selection.

This project designs a Linux Single Board Computer using STM32MP157FAC1, featuring DDR memory, a power management IC, USB and SD card interfaces, and essential user controls, aimed at versatile embedded applications.

This project designs a Linux Single Board Computer using STM32MP157FAC1, featuring DDR memory, a power management IC, USB and SD card interfaces, and essential user controls, aimed at versatile embedded applications.

The OPAx863 series from Texas Instruments includes the OPA863, OPA2863, and OPA4863, which are low-power, rail-to-rail input/output, voltage-feedback operational amplifiers designed for high-performance applications. These amplifiers feature a unity-gain bandwidth of 110 MHz, a gain-bandwidth product of 50 MHz, and a low quiescent current of 700 µA per channel. The devices operate across a wide supply voltage range of 2.7 V to 12.6 V, making them suitable for both portable and battery-powered systems. With a slew rate of 105 V/µs, 5.9 nV/√Hz input voltage noise, and exceptional harmonic distortion performance (-129 dBc HD2, -138 dBc HD3 at 20 kHz for 2 Vpp output), the OPAx863 is adept for driving SAR and ΔΣ ADCs, acting as ADC reference buffers, low-side current sensing, photodiode TIA interfaces, and other high-precision tasks. Additional features include overload power limiting, output short-circuit protection, and a power-down mode with minimal quiescent current, making the OPAx863 series a versatile and robust choice for applications requiring low power and high-precision analog performance. The series includes single, dual, and quad-channel configurations available in various surface-mount packages to fit different design requirements.

This project designs a Linux Single Board Computer using STM32MP157FAC1, featuring DDR memory, a power management IC, USB and SD card interfaces, and essential user controls, aimed at versatile embedded applications.

The TUSB8041 by Texas Instruments is a highly integrated four-port USB 3.0 hub controller designed to facilitate high-speed data transfers and power management in computer systems, docking stations, monitors, and set-top boxes. This component offers simultaneous SuperSpeed USB (5 Gbps), high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) data connections, ensuring backward compatibility with USB 2.0 and USB 1.x devices. Key features include multi-transaction translation with four transaction translators, asynchronous endpoint buffers for improved data management, and comprehensive battery charging support compliant with various standards including CDP, DCP, and Chinese Telecommunications Industry Standard YD/T 1591-2009. Flexible power management options are available, catering to both per-port and ganged power control configurations, alongside over-current protection mechanisms. The device also supports custom configurations via OTP ROM, serial EEPROM, or I2C/SMBus interfaces, enabling customization for vendor IDs, product IDs, port specifics, and string descriptors. Ease of integration is further enhanced with the ability for on-board and in-system OTP/EEPROM programming via the USB 2.0 upstream port, and the device requires no special drivers, operating seamlessly with any OS that supports USB. Packaged in a compact 64-pin QFN format, the TUSB8041 is offered in both commercial (0℃ to 70℃) and industrial temperature (-40℃ to 85℃) ranges, ensuring robust performance across diverse environmental conditions. With a single clock input requirement and comprehensive system resource support, the TUSB8041 is ideal for developers aiming to implement high-performance and reliable USB hubs in their designs.

The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

Two-layer analog/RF interface board scaling a Vescent D2-125 servo output to drive the VTUNE input of a Crystek CVCO55CL-0060-0110, with clamps, test access, and controlled-impedance RF output.

High-end 2-channel USB Audio Class 2.0 measurement interface for Smaart/REW use, with XMOS digital audio, isolated converter domain, smart encoder/LED UI, precision mic input, DAC line output, loopback ADC, phantom power, and protected USB-C power input.

ESP32-C3 battery-powered pH and ORP probe interface using ADS1115 differential ADC, MCP6002 through-hole buffers, DS18B20 temperature compensation, and short net labels for firmware handoff.

USB-C powered RP2350 dual-port SAS interface board with opto-isolated current-loop and RS-232 populate-option front-ends.