This project is a reference design for a 2A Solar Panel Power Manager With 7.2V LiFePO4 Battery and 17V Peak Power Tracking based on LT3652 IC. It includes components like resistors, capacitors, LEDs, and a JST connector for power input and battery connection. The design caters to high input voltage applications and ensures efficient charging with minimal components. #project #LT3652 #ReferenceDesign #charger #BatteryManagement #solar #LiFePO4 #referenceDesign #bms #analog #template #reference-design

Power Barrel Connector Jack 2.10mm ID (0.083"), 5.50mm OD (0.217") Through Hole #commonpartslibrary #connector #barrel #jack #Power-Connector #PJ-044

20-W MONO CLASS-D AUDIO POWER AMPLIFIER with terminal block connector for a speaker #audioDevices

20-W MONO CLASS-D AUDIO POWER AMPLIFIER with terminal block connector for a speaker

20-W MONO CLASS-D AUDIO POWER AMPLIFIER with terminal block connector for a speaker #audioDevices

20-W MONO CLASS-D AUDIO POWER AMPLIFIER with terminal block connector for a speaker #audioDevices

20-W MONO CLASS-D AUDIO POWER AMPLIFIER with terminal block connector for a speaker

This project is a QRE1113 opto-reflective sensor circuit, using a 47K pull-up resistor (R2) and a 100 Ohm resistor (R1). It includes a 1µF capacitor (C1) for stability and attaches to a JST connector (J1) for easy interfacing. Power is provided via VCC, with the output signal (OPTO_OUT) fed back. #referenceDesign #industrialsensing #onsemi #template #reference-design

20-W MONO CLASS-D AUDIO POWER AMPLIFIER with terminal block connector for a speaker

This project is a Smart Thermostat design using an ESP32 module for WiFi connectivity and a BME680 sensor for environmental monitoring. The user interface includes an E-ink display and an encoder for settings adjustment. Power is managed through a USB-C connector with a 3.3V regulator. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a Smart Thermostat design using an ESP32 module for WiFi connectivity and a BME680 sensor for environmental monitoring. The user interface includes an E-ink display and an encoder for settings adjustment. Power is managed through a USB-C connector with a 3.3V regulator. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a Smart Thermostat design using an ESP32 module for WiFi connectivity and a BME680 sensor for environmental monitoring. The user interface includes an E-ink display and an encoder for settings adjustment. Power is managed through a USB-C connector with a 3.3V regulator. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a Smart Thermostat design using an ESP32 module for WiFi connectivity and a BME680 sensor for environmental monitoring. The user interface includes an E-ink display and an encoder for settings adjustment. Power is managed through a USB-C connector with a 3.3V regulator. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a distance detecting sensor circuit build around GP2Y0D805Z0F IC from SHARP/Socle Technology. It includes decoupling capacitors, feedback resistors, and a LED for signal indication, with power being supplied via the J1 connector. #referenceDesign #industrialsensing #sharp #template #reference-design

Board for low power projects based on ESP32. It has I2C connector, one UART connector, boot and reset buttons and RGB led #led #esp32 #sd #iot

Board for low power projects based on ESP32. It has I2C connector, one UART connector, boot and reset buttons and RGB led

This is a reference design of a BQ24070-based li ion charging IC created according to the manufacturer's recommendations. The board has a connector with pins for setting modes and 3 power connectors #BQ24070 #IC #lion #referenceDesign #bms #texas-instruments #template #reference-design

This project is a reference design for the VCNL3040 sensor interfaced via I2C. It includes a VCNL3040 ambient light sensor, a voltage regulator (AP2112K-3.3TRG1), an I2C level shifter using BSS138 MOSFETs, and necessary support components. Circuit interfaces through a JST connector. All components are powered by a 3.3V power source. #referenceDesign #industrialsensing #vishay #template #reference-design

Board for low power projects based on ESP32, here is one I2C connector, one UART connector, boot and reset buttons and RGB led

Single-project implementation of the Blue Ant AMP Architecture Rev2 using one shared schematic with six logical board partitions: PCB-01 phono stage, PCB-02 input selector and relay attenuator interface, PCB-03 balanced driver and RCA-to-balanced conversion interface, PCB-04 dual logical power amplifier channels, PCB-05 multi-rail power supply, and PCB-06 isolated control and display. Explicit inter-partition connector interfaces and named nets preserve balanced signal handling after RCA conversion, distinct rail domains (+63V, -63V, +15V, -15V, +5V, +3.3V), and documented hard constraints including low-noise analog isolation and high-voltage domain separation.

The LoST 3296 board features an Low Power STM32, an RFM95 Module for LoRA connectivity and a connector to interface different sensors. You can hook up a UART module, I2C module and a module using the RS485. The board is powered by the USB-C port

DC Power Receptacle 3mm 6.2mm 5A 24V Plugin AC/DC Power Connectors ROHS

This project is a WiFi Gesture Light Switch controlled by an ESP32 microcontroller. It leverages APDS-9960 and CH340C ICs for gesture recognition and USB communication respectively. Essential components include diodes for voltage protection, LEDs for status indication, and an AMS1117 voltage regulator to ensure a stable power supply. Connectors like USB Type-C are used for power and data transfers. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a WiFi Gesture Light Switch controlled by an ESP32 microcontroller. It leverages APDS-9960 and CH340C ICs for gesture recognition and USB communication respectively. Essential components include diodes for voltage protection, LEDs for status indication, and an AMS1117 voltage regulator to ensure a stable power supply. Connectors like USB Type-C are used for power and data transfers. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a WiFi Gesture Light Switch controlled by an ESP32 microcontroller. It leverages APDS-9960 and CH340C ICs for gesture recognition and USB communication respectively. Essential components include diodes for voltage protection, LEDs for status indication, and an AMS1117 voltage regulator to ensure a stable power supply. Connectors like USB Type-C are used for power and data transfers. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a WiFi Gesture Light Switch controlled by an ESP32 microcontroller. It leverages APDS-9960 and CH340C ICs for gesture recognition and USB communication respectively. Essential components include diodes for voltage protection, LEDs for status indication, and an AMS1117 voltage regulator to ensure a stable power supply. Connectors like USB Type-C are used for power and data transfers. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a WiFi Gesture Light Switch controlled by an ESP32 microcontroller. It leverages APDS-9960 and CH340C ICs for gesture recognition and USB communication respectively. Essential components include diodes for voltage protection, LEDs for status indication, and an AMS1117 voltage regulator to ensure a stable power supply. Connectors like USB Type-C are used for power and data transfers. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a WiFi Gesture Light Switch controlled by an ESP32 microcontroller. It leverages APDS-9960 and CH340C ICs for gesture recognition and USB communication respectively. Essential components include diodes for voltage protection, LEDs for status indication, and an AMS1117 voltage regulator to ensure a stable power supply. Connectors like USB Type-C are used for power and data transfers. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

Digitally controlled 24 V to 0-12 V 1 A buck converter with STM32G4 MCU, CC/CV regulation, SWD debug, SPI expansion connectors, and placeholder power I/O connectors.

This project is a WiFi Gesture Light Switch controlled by an ESP32 microcontroller. It leverages APDS-9960 and CH340C ICs for gesture recognition and USB communication respectively. Essential components include diodes for voltage protection, LEDs for status indication, and an AMS1117 voltage regulator to ensure a stable power supply. Connectors like USB Type-C are used for power and data transfers. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a WiFi Gesture Light Switch controlled by an ESP32 microcontroller. It leverages APDS-9960 and CH340C ICs for gesture recognition and USB communication respectively. Essential components include diodes for voltage protection, LEDs for status indication, and an AMS1117 voltage regulator to ensure a stable power supply. Connectors like USB Type-C are used for power and data transfers. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

This project is a WiFi Gesture Light Switch controlled by an ESP32 microcontroller. It leverages APDS-9960 and CH340C ICs for gesture recognition and USB communication respectively. Essential components include diodes for voltage protection, LEDs for status indication, and an AMS1117 voltage regulator to ensure a stable power supply. Connectors like USB Type-C are used for power and data transfers. #referenceDesign #project #ESP32 #ESP32WROOM #RF #WIFI #MCU #thermostat #referenceDesign #edge-computing #edgeComputing #espressif #template #reference-design

ChargeGuard Gateway - PCB layout review status: schematic power tree review is clean; remaining work is PCB-layout-only cleanup. Current DRC inventory: 136 Overlapping Copper, 56 Floating Copper, 88 Airwires, 0 Missing Footprints, 0 Invalid Layer, 0 Important Overrides. Priority 1: protected input and power-path regions around VIN_PROTECTED, VIN_FILTERED, +5V_MAIN, +3V3_MAIN because these can block reliable routing and copper pours. Manual PCB editor tasks: remove/reshape overlapping copper, reconnect broken traces or redraw routes causing airwires, delete stranded copper islands, inspect ambiguous pad-to-trace shorts around power devices and connectors. Agent-preparable tasks: maintain issue inventory, classify nets and priorities, preserve stackup/documentation, define DRC recheck loop, and guide Auto-Layout sequencing after manual copper cleanup. Recheck loop: fix one issue class or one critical region at a time, rerun DRC, confirm counts decrease, then move to next batch until airwires/floating copper/overlaps are zero. Completion checklist: 1) clear power-path overlaps, 2) remove floating copper islands, 3) close all airwires, 4) rerun DRC after each batch, 5) confirm clean layout before manufacturing export.

Introducing our innovative modular, AI-powered DIY laptop carrier board project! This design focuses on a step-by-step approach, starting with a solid architectural scaffold that lays the groundwork for a high-performance system. The project is built around a hierarchical schematic structure including: • A Top Sheet outlining the system overview and power tree • SoM Connectors organized into three 100-pin assemblies (two CM4/5-compatible and one dedicated to high-speed operation) • Dedicated Power/PD management • An M.2 A+E interface for the Coral TPU (PCIe x1 from PORT0) • An M.2 M-key interface for an NVMe SSD (PCIe x2 from PORT1) • Comprehensive USB & Hub configurations • A microSD integration module • Supervisory and Reset controls The design aligns with cost-effective 4-layer board stackup practices (JLCPCB friendly) while following best high-speed design guidelines for USB/PCIe integrity. The integrated silkscreen placeholders feature custom sci-fi fonts for a unique, personal branding touch. Key routing notes include precise PCIe lane mappings based on the Orange Pi CM5 manual, ensuring clean ground return paths, effective decoupling, and proper AC-coupling placement. With paired USB hubs optimized for minimal depth and latency and robust power sequencing strategies, this project is poised to evolve into a high-speed, scalable prototype. #DIYElectronics #ModularDesign #PCBDesign #EmbeddedSystems #PCIe #USBDesign #OrangePiCM5 #TechInnovation #HighSpeedElectronics

System Architecture Overview with PWM Interface, Power Stage, Protections, EMI Filters, Connectors, Hall-Effect Current Monitoring, 4-pin JST-XH Control Header, Isolation & Default-OFF PWM Behavior, Compact Mechanical Layout #hall-sensing #isolated-control #compact-layout

This project is a design for a UV sensor circuit based on the Lite-On LTR-390UV-01. Key components include a voltage regulator (AP2112K-3.3TRG1), level-shifting N-channel MOSFETs (BSS138), resistors, and capacitors. The circuit interface includes I2C communication and power connections, facilitated through JST connectors. #referenceDesign #industrialsensing #liteon #template #reference-design

This project is a design for a UV sensor circuit based on the Lite-On LTR-390UV-01. Key components include a voltage regulator (AP2112K-3.3TRG1), level-shifting N-channel MOSFETs (BSS138), resistors, and capacitors. The circuit interface includes I2C communication and power connections, facilitated through JST connectors. #referenceDesign #industrialsensing #liteon #template #reference-design

This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

This is a climate control system reference design with a STM32WB5 microcontroller, power manager IC, USB Type-C, JST connectors, and an LCD driver. #referenceDesign #edge-computing #edgeComputing #stm #template #iot #control #BLE #reference-design

Universal Serial Bus (USB) is an industry standard that establishes specifications for cables and connectors and protocols for connection, communication and power supply (interfacing) between computers, peripherals and other computers

A presence sensing device powered by a mean well AC DC converter with a ESP32 C3 for it's brain plus a ld2410 mmwave module. the relay can be used to switch mains power. the ld2410 is connected through the terminal connectors.

Project Title: Plant Monitoring and Irrigation System Overview: This system is based on the ESP32-S3 and is designed to manage irrigation for a multi-floor building. Key Features: Multi-Floor Operation: The system controls three separate floors. Each floor's irrigation can be managed independently. Irrigation and Pump Control: Each floor uses a solenoid valve to regulate water flow. The solenoid valves are operated via MOSFETs. A relay engages an AC water pump when a MOSFET triggers a solenoid valve. Hardware Interconnects: Screw Terminal connectors are added for connecting the solenoid valves and the motor pump. A DC Jack is included to supply power to the system. User Interface & Connectivity: Two JST connectors are provided for integrating an OLED display, a rotary encoder, and a pushbutton. Future enhancements may include the addition of soil moisture sensors. Remote Control: The system is designed for future integration with Blynk IoT. Blynk IoT will offer both manual control and timer-based irrigation modes for each floor.

Programmable USB Type‐C Controller with Power Delivery(PD) support. Include ESD Protection Diodes. With JST connectors and with block terminal connectors for VBUS #project-template #USB #typec #powerdelivery #project

This project is a simple operational amplifier circuit using a UA741CP chip. It provides essential differentiation and integration functions, featuring connections for power, input, and output. Two resistors, one capacitor, and several connectors complete the circuit design. #project

CNC hydraulic press brake controller with STM32H743, ADS1256, 5x DAC8501 ±10V outputs, 3x AD598 LVDT interfaces, isolated 24V digital inputs, 100BASE-TX Ethernet, watchdog, E-stop hardware disable, and 4-layer 220mm x 160mm PCB architecture. Domains: field 24V I/O, precision analog, logic/Ethernet. Safety behavior: E-stop and valve-disable force all analog command outputs to 0V-safe state and disable field enables; watchdog and power-good supervisor reset MCU on comms or rail faults. PCB constraints: L1/L4 signal+components, L2 solid GND, L3 power plane, 1.0mm board inset margin, RJ45 at edge, field connectors on opposite edge, isolation corridor between field wiring and logic/Ethernet, 4x M4 plated mounting holes inset 10mm from corners.