3.7V Lipo Charger. Interfaces with MT3608 Boost Converter to convert 3.7V to 5V. Slot on top of your Arduino and charge your battery while the Arduino is plugged in. Or run your Arduino portably using the battery.

Product Type: Wearable AI pendant Primary Function: Records audio, generates transcripts, and organizes information about daily interactions User Interaction: Input: Activation button Output: RGB LED ring, Bluetooth link to phone Key Features: Audio Recording: Activated by button press Transcription: Converts audio to text Sentiment Analysis: Embedded AI evaluates sentiment Information Management: Filters essential information and action items Technical Specifications Form Factor: Wearable pendant Display: RGB LED ring around the edge Sensors: 2 Microphones 1 Button Connectivity: Bluetooth for phone linkage Wi-Fi USB-C for charging Wireless Protocol: Wi-Fi, Bluetooth Battery Type: LiPo 2000 mAh Battery Life: 6 hours of continuous use Charging Method: USB-C Operating Voltage: 3.3V Operating Conditions: Temperature Range: -10°C to 70°C Humidity: 10 to 90% Software: Python for AI and processing Compliance: RoHS, FCC, CE Reliability: 20,000 hrs Life Cycle Expectancy: 10 years AI Capabilities Speech to Text Recognition: Converts audio input to written text Embedded AI Sentiment Analysis: Evaluates the mood or sentiment expressed in the text Essential Information Filtering: Identifies and segregates crucial data and actionable items Power Consumption and Efficiency Power consumption must align with battery capacity to ensure 6 hours of continuous operational use.

The Argon is a powerful Wi-Fi enabled development board for Wi-Fi networks. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes. #Particle #Argon #Template #Iot #Project-template

A hand-solderable SMD/TH module w/ RP2040 MCU+8MB FLASH, LDO, LiPo charger. #template #part #RP2040 #RPI

The Argon is a powerful Wi-Fi enabled development board for Wi-Fi networks. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes. #Particle #Argon #Template #Iot #Project-template

Compact wearable necklace PCB for 5-second audio capture. A button press starts recording with an audible beep, and button release/end of the 5-second window produces a second beep. The design targets low-power LiPo operation, safe charging, small necklace-friendly form factor, accessible programming/debug, and production-ready ERC/DRC-clean PCB layout.

Wearable EMG acquisition PCB with 8 differential biopotential channels, BLE/USB MCU, USB-C LiPo charging, 3.3V buck regulation, and 2.4GHz chip antenna path.

Dashboard-mounted solar-assisted automotive compass for a Toyota FJ Cruiser using three amber 7-segment displays, an I2C magnetometer, MCU/display driver control, LiPo energy storage, and a dimmer knob with off switch.

Beginner-friendly battery-powered ESP32-S3 board with USB-C charging/programming, LiPo power-path charging, three flex sensor inputs, one I2C IMU, and two haptic driver outputs.

Power management board for a low-power embedded system with solar panel, 1S LiPo battery, and USB 2.0 inputs; charges the battery from available external power, powers the system from battery when external sources are absent, prioritizes USB over solar, and generates selectable boosted 12V or 5V output plus a regulated 3.3V rail.

Power management board for a low-power embedded system with solar panel, 1S LiPo battery, and USB 2.0 inputs; charges the battery from available external power, powers the system from battery when external sources are absent, prioritizes USB over solar, and generates selectable boosted 12V or 5V output plus a regulated 3.3V rail.

Compact 60 mm x 40 mm child safety wearable PCB with ESP32-S3, SIM800L GSM, NEO-6M GPS, MPU-6050, MAX30102, USB-C charging/programming, LiPo battery input, and test-pointed I2C/UART power rails. Target layout is 2-layer with all components on top, bottom ground plane, short direct I2C/UART routing, and GSM placement isolated from GPS and sensor sections.

Compact 2-layer ESP32-S3-MINI-1 piezo TX/RX board for a shared 3 MHz transducer node. Includes USB 5 V input, TP4056 single-cell LiPo charging, TLV75533 3.3 V regulation, ferrite-bead isolated 3V3_ANALOG rail, ~12 V pulsed TX boost rail, low-gate-charge NMOS transmit driver, clamp-protected RX input, 2-stage OPA836 analog receive chain, envelope detector, ADC interface, TMP117 I2C temperature sensor, and status LEDs. Layout intent: piezo centered, RX chain within 10 mm of PIEZO_NODE, boost section remote from RX, digital and analog partitioning, and AGND/DGND star connection near RX front end.

Hybrid EEG BCI for Pluto X v1.1 using ESP32-WROOM-32 and ADS1299-6PAG with LiPo charging, 5V boost, -5V analog rail, split 3.3V analog/digital regulators, six EEG channels, RC electrode protection, and 80x60mm mixed-signal PCB constraints.

Passive BLE tracker locator with ESP32-S3, 2.4-inch TFT UI, USB-C charging, LiPo battery power, GNSS logging, 2.4 GHz BLE/Wi-Fi energy detection, passive BLE advertisement identification in firmware, and optional ADL5904 cellular-band sensing.

BLE wearable flex PCB with LiPo charging, PPG plus skin temperature, 3-channel EMG, IMU, and piezo impact sensing for a smart compression sleeve

Audio-first ESP32-S3 wearable PCB. 44 × 26 × 1.0 mm. ESP32-S3-MINI-1 + INMP441 + TP4056 + DW01A/FS8205A + ME6211C33. 800mAh 802545 LiPo. Native USB on GPIO19/20. BLE audio wearable.

Bilateral smart running insole data logger using two nearly identical ESP32-S3 pressure-sensing PCBs. Left variant is an ESP-NOW slave without microSD; right variant is the master with microSD logging. Both preserve the 16-zone FSR mux front end, LiPo charging, AP2112K regulation, USB-C charging input, JST battery connector, and the 280mm x 90mm 2-layer low-profile insole form factor.

Cow health-monitoring wearable PCB for a cow-mounted device. Rear strap electronics target 20-25 g and front sensing assembly target about 15 g. Uses an ESP32-based sensor controller, 200 mAh LiPo battery, battery charging circuitry, and interfaces for ammonia, methane, IR temperature, and saliva sensing. Design must tolerate moisture, mucus, debris, vibration, fur contact, and tongue/lick exposure while remaining compact and lightweight for wearable use.

FlowState Headband EVT1 — 4-Channel EEG Calibration Device Closed-loop EEG neurofeedback headband for theta/beta baseline calibration. 4-layer mixed-signal PCB, 40x30mm. Core ICs: - ADS1299-4PAG (TI) — 4-channel 24-bit EEG analog front end, SPI interface, 250 SPS - nRF5340 (Nordic) — Dual-core BLE 5.3 SoC, 128 MHz app core + 64 MHz network core Key requirements: - Separate analog and digital power domains (dual LDO: LP5907 for AVDD, AP2112 for DVDD) - Split analog/digital ground planes with single-point connection - 6 electrode inputs (4 active + 1 reference + 1 DRL) with individual TVS ESD protection on each - LIS2DH12 accelerometer (I2C) for motion artifact detection - MCP73831 USB-C battery charging (300-500 mAh LiPo) - 2.4 GHz chip antenna or PCB trace antenna at board edge with 10mm keepout - Conformal coating for sweat/moisture protection Reference designs: - Analog front-end: TI ADS1299 EVM (SBAS499) - Digital/BLE: Nordic nRF5340 DK reference schematic Critical constraint: Microvolt-level EEG signals — analog input routing and power supply filtering are the highest-priority layout concerns.

Wearable closed-loop ultrasonic monitoring and transcutaneous neuromodulation system based on ESP32-C3, powered from a 7.4 V 1000 mAh LiPo battery with TP4056 charging, MT3608 boost conversion, AMS1117-3.3 regulation, JSN-SR04T ultrasonic sensing, LED and buzzer alerts through a BC547 driver, and a reserved neuromodulation interface for future integration.

Wearable health device prototype schematic with ECG sensing via AD8232, motion sensing via BNO085 or BMI270 IMU breakout, on-board processing using TI TM4C123G LaunchPad or MSPM0G3507 LaunchPad, optional ESP8266 Wi-Fi, LiPo battery charging with MCP73831, regulated 3.3 V power from TPS63031 buck-boost or AP2112 LDO prototype option, and user interfaces including electrode connector, JST battery connector, programming header, and optional on/off switch.

Production-defensible Rev B ear tag tracker using nRF9151 with separate LTE and GNSS antennas, solar-assisted LiPo charging, battery protection, SPI NOR flash, NFC, eSIM, I2C sensors, Tag-Connect SWD, grouped EVT test points, and RF/power zoning on a 40 mm x 24 mm 4-layer PCB.

ESP32-S3 Wearable Audio Streaming Pendant (USB-C + LiPo + I2S Mic + microSD + OLED)

4×4 cm USB-C PD & Qi Wireless Power Bank with Li-Po Charging, Power-Path Management, 3.3 V LDO, Full-Bridge Gate Driver, LED Resistors, and Corrected 5 V Output Feedback (Schematic Cleaned: Redundant Net Portals/Passives Removed, Fuel-Gauge LED Channels Verified, ERC/DRC Issues Resolved)

Compact 4-Layer ESP32-S3-DevKitC-1 Nano-Style Carrier Board with I²S Audio, Class-D Amp, MicroSD, LiPo Power, WS2812B, and IR; featuring updated all-layer antenna keepout, additional decoupling capacitors on 5 V/3.3 V rails, four M3 mounting holes, finalized rounded-corner PCB outline and hand-friendly width, centered ESP32-S3-DevKitC-1 and symmetrically aligned MicroSD/I²S mic, centered bottom silkscreen title text, and zero-error ERC/DRC; layout is finalized and ready for routing #ESP32S3 #DevKitC1 #antennaKeepout #decoupling #M3MountingHoles #routingReady

Falcon One v1 – Compact STM32-Based GNSS + LoRa 915 MHz Telemetry Node with LiPo Power and USB-C

ESP32 Environmental Monitor PCB with USB‑C, 500 mA LiPo Charging (TP4056, R9=2.4 kΩ), and I2C Sensors – 50 mm × 35 mm, 2‑Layer

1S LiPo USB-C Power Management and 3.3V Regulation Subsystem with SIM800L Modem, TPS61088 5V Boost for MAX98357A Audio and W25Q32 SPI MP3 Storage

Pocket Soundbox – LiPo-Powered Cellular I2S MP3 Audio Player (SIMCom A7670E-LASE, Nano-SIM, I2S MP3 to PCM5101A DAC, FM8002E Amp, 1.8V↔3.3V UART/PWRKEY Level Shifting, Remapped J4, MP2315 3.3V Power Path, USB-C ESD/TVS) with power ON/OFF long-press control via SW2 and Q2 featuring pull-ups, RC debounce, and PFET safety clamp (#Cellular #I2S #LiPo #Audio #powerbutton #debounce #PFET)

Ultra-Compact 20x10 mm Wearable BLE Finger Gesture PCB with ESP32-C3, IMU, Li-Po Charging, and Flex Sensor Support

Product Type: Wearable AI pendant Primary Function: Records audio, generates transcripts, and organizes information about daily interactions User Interaction: Input: Activation button Output: RGB LED ring, Bluetooth link to phone Key Features: Audio Recording: Activated by button press Transcription: Converts audio to text Sentiment Analysis: Embedded AI evaluates sentiment Information Management: Filters essential information and action items Technical Specifications Form Factor: Wearable pendant Display: RGB LED ring around the edge Sensors: 2 Microphones 1 Button Connectivity: Bluetooth for phone linkage Wi-Fi USB-C for charging Wireless Protocol: Wi-Fi, Bluetooth Battery Type: LiPo 2000 mAh Battery Life: 6 hours of continuous use Charging Method: USB-C Operating Voltage: 3.3V Operating Conditions: Temperature Range: -10°C to 70°C Humidity: 10 to 90% Software: Python for AI and processing Compliance: RoHS, FCC, CE Reliability: 20,000 hrs Life Cycle Expectancy: 10 years AI Capabilities Speech to Text Recognition: Converts audio input to written text Embedded AI Sentiment Analysis: Evaluates the mood or sentiment expressed in the text Essential Information Filtering: Identifies and segregates crucial data and actionable items Power Consumption and Efficiency Power consumption must align with battery capacity to ensure 6 hours of continuous operational use.

Product Type: Wearable AI pendant Primary Function: Records audio, generates transcripts, and organizes information about daily interactions User Interaction: Input: Activation button Output: RGB LED ring, Bluetooth link to phone Key Features: Audio Recording: Activated by button press Transcription: Converts audio to text Sentiment Analysis: Embedded AI evaluates sentiment Information Management: Filters essential information and action items Technical Specifications Form Factor: Wearable pendant Display: RGB LED ring around the edge Sensors: 2 Microphones 1 Button Connectivity: Bluetooth for phone linkage Wi-Fi USB-C for charging Wireless Protocol: Wi-Fi, Bluetooth Battery Type: LiPo 2000 mAh Battery Life: 6 hours of continuous use Charging Method: USB-C Operating Voltage: 3.3V Operating Conditions: Temperature Range: -10°C to 70°C Humidity: 10 to 90% Software: Python for AI and processing Compliance: RoHS, FCC, CE Reliability: 20,000 hrs Life Cycle Expectancy: 10 years AI Capabilities Speech to Text Recognition: Converts audio input to written text Embedded AI Sentiment Analysis: Evaluates the mood or sentiment expressed in the text Essential Information Filtering: Identifies and segregates crucial data and actionable items Power Consumption and Efficiency Power consumption must align with battery capacity to ensure 6 hours of continuous operational use.

Product Type: Wearable AI pendant Primary Function: Records audio, generates transcripts, and organizes information about daily interactions User Interaction: Input: Activation button Output: RGB LED ring, Bluetooth link to phone Key Features: Audio Recording: Activated by button press Transcription: Converts audio to text Sentiment Analysis: Embedded AI evaluates sentiment Information Management: Filters essential information and action items Technical Specifications Form Factor: Wearable pendant Display: RGB LED ring around the edge Sensors: 2 Microphones 1 Button Connectivity: Bluetooth for phone linkage Wi-Fi USB-C for charging Wireless Protocol: Wi-Fi, Bluetooth Battery Type: LiPo 2000 mAh Battery Life: 6 hours of continuous use Charging Method: USB-C Operating Voltage: 3.3V Operating Conditions: Temperature Range: -10°C to 70°C Humidity: 10 to 90% Software: Python for AI and processing Compliance: RoHS, FCC, CE Reliability: 20,000 hrs Life Cycle Expectancy: 10 years AI Capabilities Speech to Text Recognition: Converts audio input to written text Embedded AI Sentiment Analysis: Evaluates the mood or sentiment expressed in the text Essential Information Filtering: Identifies and segregates crucial data and actionable items Power Consumption and Efficiency Power consumption must align with battery capacity to ensure 6 hours of continuous operational use.

Introducing an innovative IoT board designed around the ESP32-WROOM-32 chipset, perfect for projects that require both performance and portability. The system is engineered to operate on a stable external 5V power source while also offering the flexibility of a 12V LiPo battery for on-the-go applications. With seamless integration of both analog and digital sensors and comprehensive support for all standard communication interfaces, this board is your gateway to creating sophisticated and reliable IoT solutions. #IoT #ESP32 #Sensors #5V #LiPoBattery #PortableTech #EmbeddedSystems #Innovation

This is a custom flight controller based around a STM32F103C8T6. It contains a BMP280 to measure the altitude of a drone, an ICM-42688-P that contains an accelerometer and gyroscope for motion control. The input voltage should be 12V and is set up to work with a LiPo battery.

Power supply for 3.3V from a 2S LiPO using an XT30 connector

The Argon is a powerful Wi-Fi enabled development board for Wi-Fi networks. It is based on the Nordic nRF52840 and has built-in battery charging circuitry so it’s easy to connect a Li-Po and deploy your local network in minutes. #Particle #Argon #Template #Iot #Project-template

My version/layout of MT3608 DC-DC Step Up Converter Booster for my Lipo Charger Arduino Shield This version comes with castellated pads on the edges!

My version/layout of MT3608 DC-DC Step Up Converter Booster for my Lipo Charger Arduino Shield

3.7V Lipo Charger. Interfaces with MT3608 Boost Converter to convert 3.7V to 5V. Slot on top of your Arduino and charge your battery while the Arduino is plugged in. Or run your Arduino portably using the battery.