SM261S4030H0R is an omnidirectional, Top‐ported, I 2 S digital output MEMS microphone. It has high performance and reliability.    MSM261S4030H0R is available in a 4 mm × 3 mm × 1.0 mm metal can LGA package. It is SMT compatible with no sensitivity degradation Cost effective Low Power mode Digital I2S output Compatible with Sn/Pb and Pb‐free solder processes RoHS/Halogen free compliant Sensitivity Matching within +/‐1dB #CommonPartsLibrary #MEMS #Microphone #Vibration-motor

PLUG-OF-NAILS 6-PIN W/O LEGS 8" TC2030 -I DC - NL TC2030-NL

1000 pF ±5% 1000V (1kV) Ceramic Capacitor C0G, NP0 2220 (5750 Metric) KEMET high-voltage C0G MLCC surface-mount ceramic capacitor, temperature-compensating Class I dielectric, capacitance range from 1pF to 0.15µF, voltage ratings from 500V to 10kV, extremely low ESR and ESL, high ripple current capability, negligible capacitance shift with temperature and voltage, no piezoelectric noise, -55°C to +125°C operating temperature, RoHS/REACH compliant, suitable for resonant circuits, high-frequency power converters, snubbers, SiC/GaN wide-bandgap systems, timing and filtering applications. Search Keywords: KEMET high voltage C0G MLCC, KEMET C0G capacitor, high voltage MLCC, C0G ceramic capacitor, Class I MLCC, temperature compensating capacitor, low ESR MLCC, high frequency MLCC, snubber capacitor, resonant capacitor, SiC GaN capacitor, 500V MLCC, 1kV MLCC, 2kV MLCC, 3kV MLCC, 10kV MLCC Hashtags: #KEMETC0G #HighVoltageMLCC #C0GCapacitor #CeramicCapacitor #MLCC #ClassICapacitor #LowESRCapacitor #SnubberCapacitor #ResonantCapacitor #HighFrequencyCapacitor #SiCCapacitor #GaNCapacitor #500VCapacitor #1kVCapacitor #10kVCapacitor

12.4V (Typ) Clamp 5.5A (8/20µs) Ipp Tvs Diode Surface Mount SC-70-3 TPD2E2U06 USB ESD The TPD2E2U06 is a dual-channel low capacitance TVS diode ESD protection device. The device offers ±25-kV contact and ±30-kV air-gap ESD protection in accordance with the IEC 61000-4-2 standard. The 1.5-pF line capacitance of the TPD2E2U06 makes the device suitable for a wide range of applications. Typical application interfaces are USB 2.0, LVDS, and I 2C™. Features 1• IEC 61000-4-2 Level 4 – ±25 kV (Contact discharge) – ±30 kV (Air-gap discharge) • IEC 61000-4-5 Surge protection – 5.5-A Peak pulse current (8/20 µs Pulse) • IO Capacitance 1.5 pF (Typ) • DC Breakdown voltage 6.5 V (Min) • Ultra-Low leakage current 10 nA (Max) • Low ESD clamping voltage • Industrial temperature range: –40°C to +125°C • Small easy-to-route DRL and DCK package #CommonPartsLibrary #TVS-diode

Zero-drift bidirectional current/power monitor with I²C interface The INA219 is a current shunt and power monitor with an I 2C- or SMBUS-compatible interface. The device monitors both shunt voltage drop and bus supply voltage, with programmable conversion times and filtering. A programmable calibration value, combined with an internal multiplier, enables direct readouts of current in amperes. An additional multiplying register calculates power in watts. The I 2C- or SMBUS-compatible interface features 16 programmable addresses Key Features Measures bus voltages from 0 V to 26 V Calculates and reports current, voltage, and power Bidirectional current sensing capability I²C / SMBus-compatible interface Up to 16 programmable I²C addresses High accuracy version (INA219B) with 0.5% maximum error over temperature Programmable conversion time and digital filtering Internal calibration register for direct current measurement in amperes Internal power calculation register for direct power readout in watts Single supply operation from 3 V to 5.5 V Low supply current consumption (typically less than 1 mA) Operating temperature range: −40°C to +125°C Available in SOIC-8 (DR package) and SOT23-8 package options. #CommonPartsLibrary #IntegratedCircuit #PowerManagement

High-Accuracy, Low-Power, Digital Temperature Sensor With SMBus- and I2C-Compatible Interface The TMP117 is a high-precision digital temperature sensor. It is designed to meet ASTM E1112 and ISO 80601 requirements for electronic patient thermometers. The TMP117 provides a 16-bit temperature result with a resolution of 0.0078 °C and an accuracy of up to ±0.1 °C across the temperature range of –20 °C to 50 °C with no calibration. The TMP117 has in interface that is I 2C- and SMBus™-compatible, programmable alert functionality, and the device can support up to four devices on a single bus. Integrated EEPROM is included for device programming with an additional 48-bits memory available for general use. The low power consumption of the TMP117 minimizes the impact of self-heating on measurement accuracy. The TMP117 operates from 1.7 V to 5.5 V and typically consumes 3.5 μA. For non-medical applications, the TMP117 can serve as a single chip digital alternative to a Platinum RTD. The TMP117 has an accuracy comparable to a Class AA RTD, while only using a fraction of the power of the power typically needed for a PT100 RTD. The TMP117 simplifies the design effort by removing many of the complexities of RTDs such as precision references, matched traces, complicated algorithms, and calibration. The TMP117 units are 100% tested on a production setup that is NIST traceable and verified with equipment that is calibrated to ISO/IEC 17025 accredited standards. • TMP117 high-accuracy temperature sensor – ±0.1 °C (maximum) from –20 °C to 50 °C – ±0.15 °C (maximum) from –40 °C to 70 °C – ±0.2 °C (maximum) from –40 °C to 100 °C – ±0.25 °C (maximum) from –55 °C to 125 °C – ±0.3 °C (maximum) from –55 °C to 150 °C • Operating temperature range: –55 °C to 150 °C • Low power consumption: – 3.5-μA, 1-Hz conversion cycle – 150-nA shutdown current • Supply range: – 1.7 V to 5.5 V from –55 °C to 70 °C – 1.8 V to 5.5 V from –55 °C to 150 °C • 16-bit resolution: 0.0078°C (1 LSB) • Programmable temperature alert limits • Selectable averaging • Digital offset for system correction • General-purpose EEPROM: 48 bits • NIST traceability • SMBus™, I2C interface compatibility • Medical grade: meets ASTM E1112 and ISO 80601-2-56 • RTDs replacement: PT100, PT500, PT1000 2 Applications • Electronic thermometers • Wireless environmental sensors • Thermostats • Automotive test equipment • Wearable fitness and activity monitors • Cold chain asset tracking • Gas meters and heat meters • Temperature transmitters #CommonPartsLibrary #Sensor

I²C Controlled Single Cell Fast Charger with MaxCharge™ Technology for High Input Voltage and Adjustable Voltage 3.1A Boost Operation The bq25895M is a highly-integrated 5-A switchmode battery charge management and system power path management device for single cell Li-Ion and Lipolymer battery. The devices support high input voltage fast charging. The low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. The I 2C Serial interface with charging and system settings makes the device a truly flexible solution. • High Efficiency 1.5-MHz Switch Mode Buck Charge – 93% Charge Efficiency at 2 A and 91% Charge Efficiency at 3 A Charge Current – Optimize for High Voltage Input (9 V / 12 V) – Low Power PFM mode for Light Load Operations • Boost Mode Operation with Adjustable Output from 4.5 V to 5.5 V – Selectable 500-KHz / 1.5-MHz Boost Converter with up-to 3.1 A Output – 93% Boost Efficiency at 5 V at 1 A Output – Support down-to 2.5V Battery – Support PWM only or PFM/PWM control for Light Load Efficiency • Integrated Control to Switch Between Charge and Boost Mode • Single Input to Support USB Input and Adjustable High Voltage Adapters – Support 3.9-V to 14-V Input Voltage Range – Input Current Limit (100 mA to 3.25 A with 50- mA resolution) to Support USB2.0, USB3.0 standard and High Voltage Adapters – Maximum Power Tracking by Input Voltage Limit up-to 14V for Wide Range of Adapters – Auto Detect USB SDP, CDP, DCP, and Nonstandard Adapters • Input Current Optimizer (ICO) to Maximize Input Power without Overloading Adapters • Resistance Compensation (IRCOMP) from Charger Output to Cell Terminal • Highest Battery Discharge Efficiency with 11-mΩ Battery Discharge MOSFET up to 9 A • Integrated ADC for System Monitor (Voltage, Temperature, Charge Current) • BATFET Control to Support Ship Mode, Wake Up, and Full System Reset • Flexible Autonomous and I 2C Mode for Optimal System Performance • High Integration includes all MOSFETs, Current Sensing and Loop Compensation • 12-µA Low Battery Leakage Current to Support Ship Mode • High Accuracy – ±0.5% Charge Voltage Regulation – ±5% Charge Current Regulation – ±7.5% Input Current Regulation #CommonPartsLibrary #IntegratedCircuit #PowerManagement