USB - micro AB USB 2.0 Receptacle Connector 5 Position Surface Mount, Right Angle #CommonPartsLibrary #Connector #USB-micro #USB-2.0 #ZX62 #SeriesZX

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle #CommonPartsLibrary #Connector #USB-C #USB-2.0 #UJ20

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (6+18 Dummy) Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #USB-C #Connector #USB-2.0 #ThroughHole

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (6+18 Dummy) Position Surface Mount, Right Angle; Through Hole #CommonPartsLibrary #USB-C #Connector #USB-2.0 #ThroughHole

The Realtek RTS5306E USB3.0 Card Reader controller is based upon Universal Serial Bus 3.0 Specification, which integrates USB 3.0 and USB2.0 Transceivers, MCU #CommonPartsLibrary #IntegratedCircuit

USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole USB Type-C receptacle 16 pin USB2.0 The USB4215-03-A is a USB Type-C receptacle connector designed for USB 2.0 applications. It features a 16-pin configuration supporting reversible plug orientation with standard USB 2.0 differential data lines and configuration channel (CC) pins. The connector is intended for surface-mount PCB assembly with through-hole shell stakes for enhanced mechanical strength. It is widely used in compact embedded systems for power delivery, charging interfaces, and basic data communication. Key Features USB Type-C receptacle (USB 2.0 compliant) 16 functional pins (no SuperSpeed support) Reversible plug orientation Surface-mount contacts with through-hole shell tabs Compact, low-profile design High insertion cycle durability Suitable for automated assembly Electrical Characteristics Rated Current: VBUS: up to 5.0 A (depending on PCB design and cable) Signal pins: 0.25 A max Rated Voltage: 20 V DC max Contact Resistance: ≤ 40 mΩ Insulation Resistance: ≥ 100 MΩ Dielectric Withstanding Voltage: 100 V AC Mechanical Characteristics Mounting Type: Surface Mount (SMT) with Through-Hole Shield Tabs Number of Positions: 16 Mating Cycles: 10,000 cycles (typical) Insertion Force: 5–20 N Extraction Force: 8–20 N Material Specifications Contacts: Copper Alloy Contact Plating: Gold over Nickel Housing: High-temperature thermoplastic (UL94V-0) Shell: Stainless Steel Environmental Characteristics Operating Temperature Range: -25°C to +85°C Storage Temperature Range: -40°C to +85°C RoHS Compliant: Yes Halogen Free: Yes Pin Configuration (USB 2.0 Type-C) VBUS (Power) GND (Ground) D+ / D− (USB 2.0 differential pair) CC1 / CC2 (Configuration channel) SBU pins (optional/unused in USB 2.0 designs) Applications USB power input (5 V / USB-C PD trigger designs) Embedded systems and development boards Consumer electronics Charging interfaces Low-speed USB communication devices Packaging Tape & Reel for automated pick-and-place assembly Compliance & Standards USB Type-C Specification (USB 2.0 interface) RoHS / REACH compliant UL recognized materials #CommonPartsLibrary #Connector #USB-C

SIM868 module is the complete Quad-Band GSM/GPRS module which combines GNSS( GPS/GLONASS/BDS) technology for satellite navigation. It has strong extension capability with abundant interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's applications. #Module #part

22 (20 + 2 Power) Position Connector Header, Outer Shroud Contacts Surface Mount Gold The BM24-20DP/2-0.35V(51) is a board-to-board and board-to-FPC header connector manufactured by Hirose Electric. It belongs to the BM24 series, a family of fine-pitch hybrid power and signal connectors designed for applications that require both data signaling and supplementary power delivery within the same compact interconnect, eliminating the need for a separate dedicated power connector alongside the signal interface. The connector functions as the plug (header) half of a mating pair, intended to mate with a corresponding BM24 receptacle to join two printed circuit boards, or a printed circuit board and a flexible printed circuit, in a low-profile board-to-board arrangement. This part number designates a configuration with a defined signal contact count supplemented by additional dedicated power contacts, reflecting the series' hybrid design philosophy in which the majority of positions handle signal or data lines while a smaller subset of positions is reserved for carrying higher current to support onboard power rails. This arrangement is particularly useful in compact consumer devices such as smartphones, wearables, and camera modules, where both data interfaces and local power distribution must be routed across a board-to-board junction without dedicating separate connectors to each function. The series is positioned by Hirose as supporting high-speed signaling standards including USB interfaces, making it suitable for applications that combine high-speed data transmission with power delivery in a single compact connector footprint. The connector's fine contact pitch and low mated height make it well suited to thin, space-constrained form factors where minimizing both footprint area and stack height is a priority. As with other Hirose board-to-board offerings, the connector is non-polarized in its base mechanical design, and it is supplied on embossed carrier tape for automated pick-and-place assembly, with construction compliant to RoHS material restrictions. Mechanically, the header is built to withstand the repeated mating cycles typical of consumer electronics manufacturing, rework, and field service, while maintaining stable, low-resistance contact across both its signal and power contact paths under realistic vibration and thermal conditions. As a header-style connector, it is intended to be soldered directly to a host PCB, with its mating receptacle counterpart soldered to the opposing board or FPC, allowing the assemblies to be joined and separated as needed throughout the product lifecycle. Spec Sheet Identification Part Number: BM24-20DP/2-0.35V(51) Series: BM24 Connector Style: Hybrid power/signal board-to-board and board-to-FPC connector Connector Type / Configuration Type: Header (plug) Gender: Male Orientation: Straight, surface mount Contact Arrangement: Hybrid configuration combining signal contacts and dedicated power contacts Polarization: Non-polarized Electrical Ratings Applicable High-Speed Protocols: USB2.0, USB3.0, USB3.1 (series capability) Transmission Rate: High-speed, multi-gigabit class (series capability) Power Contacts: Dedicated higher-current contacts integrated alongside signal contacts Mechanical Specifications Contact Pitch: Fine pitch Mounting Pitch: Matches contact pitch Mated Height: Low-profile Mounting Method: Surface mount technology (SMT) Mating Cycles: Rated for repeated mate/unmate cycles typical of consumer electronics assembly and rework Contact & Material Properties Contact Plating (Mating Area): Gold Insulator Material: High-temperature engineering resin suitable for SMT reflow Environmental Ratings RoHS Compliance: Yes Packaging Packaging Format: Embossed carrier tape, reel format Packaging Code Meaning: Suffix denotes embossed tape packaging at a standard reel quantity Mating Compatibility Mates With: Corresponding BM24 series receptacle connector Application Note: Intended for hybrid power and signal board-to-board or board-to-FPC interconnection in compact consumer electronics #BM24 #Hirose #HiroseElectric #BoardToBoard #BoardToFPC #HybridConnector #PowerAndSignal #Connector #SMTConnector #FinePitchConnector #USB #HighSpeedConnector #ConsumerElectronics #PCBDesign #HardwareEngineering #ConnectorDatasheet #EngineeringSpec #RoHSCompliant #ComponentLibrary #CommonPartsLibrary

I²C Controlled Single Cell Fast Charger with MaxCharge™ Technology for High Input Voltage and Adjustable Voltage 3.1A Boost Operation The bq25895M is a highly-integrated 5-A switchmode battery charge management and system power path management device for single cell Li-Ion and Lipolymer battery. The devices support high input voltage fast charging. The low impedance power path optimizes switch-mode operation efficiency, reduces battery charging time and extends battery life during discharging phase. The I 2C Serial interface with charging and system settings makes the device a truly flexible solution. • High Efficiency 1.5-MHz Switch Mode Buck Charge – 93% Charge Efficiency at 2 A and 91% Charge Efficiency at 3 A Charge Current – Optimize for High Voltage Input (9 V / 12 V) – Low Power PFM mode for Light Load Operations • Boost Mode Operation with Adjustable Output from 4.5 V to 5.5 V – Selectable 500-KHz / 1.5-MHz Boost Converter with up-to 3.1 A Output – 93% Boost Efficiency at 5 V at 1 A Output – Support down-to 2.5V Battery – Support PWM only or PFM/PWM control for Light Load Efficiency • Integrated Control to Switch Between Charge and Boost Mode • Single Input to Support USB Input and Adjustable High Voltage Adapters – Support 3.9-V to 14-V Input Voltage Range – Input Current Limit (100 mA to 3.25 A with 50- mA resolution) to Support USB2.0, USB3.0 standard and High Voltage Adapters – Maximum Power Tracking by Input Voltage Limit up-to 14V for Wide Range of Adapters – Auto Detect USB SDP, CDP, DCP, and Nonstandard Adapters • Input Current Optimizer (ICO) to Maximize Input Power without Overloading Adapters • Resistance Compensation (IRCOMP) from Charger Output to Cell Terminal • Highest Battery Discharge Efficiency with 11-mΩ Battery Discharge MOSFET up to 9 A • Integrated ADC for System Monitor (Voltage, Temperature, Charge Current) • BATFET Control to Support Ship Mode, Wake Up, and Full System Reset • Flexible Autonomous and I 2C Mode for Optimal System Performance • High Integration includes all MOSFETs, Current Sensing and Loop Compensation • 12-µA Low Battery Leakage Current to Support Ship Mode • High Accuracy – ±0.5% Charge Voltage Regulation – ±5% Charge Current Regulation – ±7.5% Input Current Regulation #CommonPartsLibrary #IntegratedCircuit #PowerManagement

USB Connectors USB205FB-C1005208 MICRO-USB-SMD_USB205FB-D1005204 LCSC Part Number: C496140 JLCPCB Part Class: Extended Part Manufactured by ATOM(爱特姆)