USB-A (USB TYPE-A) USB 2.0 Receptacle Connector 4 Position Through Hole, Right Angle The ADS1256IDBT is a high-precision, low-noise, 24-bit analog-to-digital converter manufactured by Texas Instruments. It is designed for high-resolution measurement applications requiring exceptional accuracy, low drift, and programmable data rates. The device integrates a low-noise programmable gain amplifier, a precision delta-sigma ADC core, and a flexible multiplexer that supports multiple differential or single-ended analog inputs. The converter is optimized for industrial process control, sensor measurement, weigh scales, data acquisition systems, temperature monitoring, and portable instrumentation. Its integrated digital filtering and selectable gain settings enable direct interfacing with low-level sensors such as strain gauges, thermocouples, RTDs, and bridge sensors without requiring extensive external signal conditioning. The ADS1256IDBT supports SPI-compatible serial communication and operates with low power consumption while maintaining excellent dynamic performance and high effective resolution. The device provides programmable output data rates suitable for both low-speed precision measurements and higher-speed acquisition systems. Device Features 24-bit delta-sigma analog-to-digital converter Low-noise programmable gain amplifier Eight single-ended or four differential analog input channels Programmable gain settings from 1 to 64 Programmable data output rates SPI-compatible serial interface Integrated digital filter for noise reduction Low offset drift and gain drift Internal oscillator support Sensor burnout detection capability Self-calibration and system calibration functions Low power operation Wide analog supply voltage range Excellent 50 Hz and 60 Hz rejection performance Electrical Characteristics Resolution of 24 bits Maximum data rate up to 30 kSPS Differential input architecture Input multiplexer for multi-channel acquisition Low RMS noise performance High common-mode rejection ratio High power-supply rejection ratio Programmable gain amplifier integrated on-chip Internal reference support with external reference capability Interface and Control SPI-compatible digital communication interface Configurable control registers Read and write register functionality Synchronization and standby control support Hardware reset capability Interrupt and data-ready signaling support Package Information Manufacturer package designation: DBT Package type: TSSOP Surface-mount device Fine-pitch lead configuration Industrial temperature grade device Applications Precision data acquisition systems Industrial automation and control Weigh scales and bridge sensors Temperature measurement systems Pressure sensing applications Portable instrumentation Medical instrumentation Laboratory measurement equipment Energy monitoring systems Process monitoring and control Manufacturer Information Manufacturer: Texas Instruments Manufacturer Part Number: ADS1256IDBT Product Category: Precision Analog-to-Digital Converter RoHS compliant device #commonpartslibrary #integratedcircuit #analog #adc #deltasigma #precisionadc #sensorinterface #dataacquisition #industrialautomation #instrumentation #signalconditioning #texasinstruments #spiinterface #mixedsignal #measurementsystems

# UCC28950TPWRQ1 Engineering Specifications **General Description** The UCC28950TPWRQ1 is an automotive-qualified phase-shifted full-bridge controller manufactured by Texas Instruments. It is specifically designed for high-efficiency isolated DC-to-DC power conversion systems requiring advanced control, high power density, and reliable operation in demanding automotive and industrial environments. The device implements phase-shifted pulse-width modulation control with programmable dead-time management to achieve zero-voltage switching across a wide load range. This soft-switching architecture significantly reduces switching losses, improves overall efficiency, minimizes electromagnetic interference, and enables higher switching-frequency operation. The controller integrates comprehensive protection and monitoring functions, including current limiting, overvoltage protection, soft-start control, and fault management. Its flexible architecture supports a wide variety of isolated power-supply topologies used in electric vehicles, onboard charging systems, telecommunications infrastructure, industrial power supplies, and high-performance DC-DC converters. Qualified to automotive reliability standards, the device is suitable for mission-critical applications requiring long-term operational stability and robust power-conversion performance. **Engineering Specifications** **Manufacturer:** Texas Instruments **Manufacturer Part Number:** UCC28950TPWRQ1 **Component Type:** Phase-shifted full-bridge PWM controller **Technology:** Advanced mixed-signal power-management integrated circuit **Control Method:** Phase-shifted pulse-width modulation **Converter Topology:** Full-bridge isolated DC-to-DC converter control **Switching Technique:** Zero-voltage switching support **Efficiency Enhancement:** Reduced switching losses through soft-switching operation **Dead-Time Control:** Programmable adaptive dead-time management **Gate Drive Outputs:** High-current complementary PWM outputs **Current Control:** Cycle-by-cycle current limiting capability **Soft-Start Function:** Programmable startup control **Synchronization Capability:** External synchronization support **Frequency Control:** Programmable switching frequency operation **Feedback Architecture:** Closed-loop voltage regulation support **Fault Management:** Integrated fault detection and shutdown capability **Protection Features:** Overcurrent protection, overvoltage protection, undervoltage lockout, fault shutdown, and soft-start protection **Automotive Qualification:** AEC-Q100 qualified **Reliability Grade:** Automotive-grade performance and reliability **Electromagnetic Compatibility:** Optimized for low-noise power-conversion applications **Power Supply Configuration:** Single-controller power-management operation **Temperature Stability:** Designed for extended automotive operating conditions **Control Flexibility:** Supports a wide range of isolated converter designs **System Integration:** Compatible with high-power MOSFET and IGBT switching stages **Operating Temperature Range:** Automotive temperature range **Package Type:** Thin Shrink Small Outline Package **Package Configuration:** Surface-mount package **Mounting Style:** Surface mount technology **Environmental Compliance:** RoHS compliant and lead-free **Quality Standard:** Automotive production and qualification standards **Typical Applications** Automotive DC-to-DC converters Electric vehicle power systems Battery management systems Onboard charging equipment Telecommunications power supplies Industrial power converters High-power isolated DC-DC modules Server and networking power systems Renewable energy conversion systems Automotive auxiliary power units Motor control power supplies Power-distribution architectures High-efficiency switching power supplies Advanced automotive electronics Mission-critical power-management systems #UCC28950TPWRQ1 #UCC28950 #TexasInstruments #PhaseShiftedFullBridge #PWMController #PowerManagement #DCDCConverter #AutomotiveElectronics #PowerSupplyDesign #ZeroVoltageSwitching #SoftSwitching #ElectricVehicle #IndustrialPower #PowerElectronics #ElectronicComponents #EngineeringSpecifications

RF Shield Frame 1.032" (26.21mm) X 1.032" (26.21mm) Surface Mount The BMI-S-203-F is a surface-mount EMI shield frame (part of a board-level shielding system) manufactured by Laird (now part of DuPont Performance Materials). It is used to enclose and isolate sensitive components on a PCB, helping prevent signal interference and improving electromagnetic compatibility (EMC). It typically comes as a one-piece or frame-style shield that is soldered directly onto the PCB, forming a metallic “cage” over critical circuits. Key Characteristics Product Type: Board-level EMI/RFI shielding enclosure Shield Style: Surface-mount frame (soldered to PCB) Dimensions: ~26.21 mm × 26.21 mm × 5.08 mm Construction Material: Typically cold rolled steel or similar conductive metal Finish: Tin-plated for good solderability Mounting: SMT (surface mount technology) Configuration: Designed for use with cover lids or as part of a two-piece shielding system Function Blocks unwanted electromagnetic interference (EMI) Prevents RF noise from affecting nearby sensitive circuits Improves signal integrity in high-speed or RF designs Helps meet EMC regulatory requirements Typical Applications RF modules and wireless circuits IoT devices Smartphones and compact electronics Communication systems High-speed digital and mixed-signal PCBs #RF-shield #SMT 2 Piece

Audio D/A Converter ICs SABRE 8 Channel Smart DAC with Line Drivers, ASP2, 7mmx7mm, 48-QFN The ES9082Q is a high-performance stereo digital-to-analog converter (DAC) developed by ESS Technology for premium audio applications requiring exceptional sound quality, low power consumption, and compact integration. It utilizes the patented HyperStream® architecture and Time Domain Jitter Eliminator technology to deliver highly accurate audio reproduction with ultra-low distortion and noise characteristics. The device supports high-resolution PCM and DSD audio formats, making it suitable for portable audio devices, USB DACs, digital media players, automotive infotainment systems, wireless audio products, and professional audio equipment. The ES9082Q integrates advanced digital filtering, low-jitter clock management, and flexible audio interface support while maintaining efficient power operation for battery-powered applications. Designed for compact embedded audio systems, the ES9082Q provides excellent dynamic range and signal fidelity while minimizing external component requirements. Its architecture enables high-quality playback performance across a wide range of consumer and industrial audio applications. Electrical Characteristics Supply voltage supports low-voltage digital and analog power domains optimized for portable and embedded applications. The device operates with low power consumption while maintaining high audio performance. Integrated power management supports efficient system-level implementation. Audio Performance The converter supports high-resolution stereo audio output with advanced oversampling and noise shaping technology. It delivers ultra-low total harmonic distortion plus noise performance and high dynamic range suitable for high-fidelity audio playback systems. PCM audio data rates support standard and high-resolution formats up to 32-bit depth with sampling frequencies extending to high-definition audio ranges. Native DSD playback capability is also supported for audiophile-grade applications. Digital Audio Interface The ES9082Q supports industry-standard serial audio interfaces including I²S, left-justified, and related digital audio communication protocols. Flexible master and slave clocking configurations enable compatibility with a wide variety of host processors and audio controllers. Integrated jitter suppression circuitry improves clock stability and minimizes timing-induced audio artifacts. Integrated Features The device incorporates digital interpolation filters, volume control functions, soft mute capability, and programmable audio processing features. Internal PLL and clock management circuitry reduce external timing component requirements. Built-in low-noise analog output stages simplify audio signal chain design and reduce overall PCB footprint. Package Information The ES9082Q is provided in a compact surface-mount package optimized for space-constrained audio products. The package supports automated assembly and high-density PCB layouts commonly used in portable and embedded systems. Typical Applications Applications include portable audio players, USB DAC modules, wireless speakers, automotive audio systems, headphones, digital amplifiers, embedded multimedia devices, smart home audio equipment, and professional audio playback systems. #commonpartslibrary #integratedcircuit #audioic #dac #stereodac #esstechnology #es9082q #highresolutionaudio #audiophile #digitalaudio #analogaudio #i2s #dsd #pcm #embeddedaudio #consumerelectronics #portableaudio #usbdac #hifi #signalprocessing #lownoise #lowdistortion #electronicsdesign #pcbdesign #hardwareengineering #electroniccomponents #semiconductor #mixedsignal #audioelectronics #soundquality

24 Bit Analog to Digital Converter 8 Input 1 Sigma-Delta 32-LFCSP (4x6) The AD4170-4BCPZ is a precision, low-noise, multi-channel analog-to-digital converter designed for high-accuracy industrial and instrumentation applications. It integrates a high-performance sigma-delta conversion architecture with flexible input multiplexing, programmable gain capability, and advanced digital filtering to support accurate acquisition of low-level sensor signals. The device is optimized for precision measurement systems requiring excellent DC performance, high resolution, and robust noise immunity. Integrated diagnostics and configurable interfaces enable reliable operation in process control, test and measurement, medical instrumentation, and data acquisition systems. Engineering Specification Device Type Precision multi-channel sigma-delta analog-to-digital converter Resolution High-resolution precision conversion architecture Input Configuration Differential and single-ended analog input support with multiplexed channel architecture Conversion Architecture Sigma-delta ADC with integrated digital filtering Programmable Gain Integrated programmable gain amplifier for low-level sensor interfacing Reference Support External and internal reference operation capability Data Interface Serial peripheral communication interface compatible with SPI operation Noise Performance Low input-referred noise optimized for precision sensing applications Sampling Capability Configurable output data rate and filter settings for noise-performance optimization Integrated Features On-chip diagnostics, calibration support, digital filtering, and error detection functions Power Characteristics Low-power precision operation suitable for industrial embedded systems Voltage Supply Wide operating supply range supporting mixed-signal system integration Temperature Performance Industrial-grade operating temperature capability for harsh environments Package Type Compact lead-frame chip scale package suitable for high-density PCB layouts Application Areas Industrial automation, precision instrumentation, process control, sensor acquisition, medical systems, laboratory equipment, and high-accuracy measurement platforms #commonpartslibrary #integratedcircuit #analog #digital #converter

Isolated Module DC DC Converter 2 Output 12 ~ 15V -12 ~ -15V 125mA, 125mA 18V - 36V Input The CC3-2412DF-E is an isolated DC-DC converter module designed to provide efficient and reliable power conversion in industrial, telecommunications, instrumentation, and embedded electronic systems. The module converts a regulated DC input voltage into isolated dual-output DC supplies while maintaining electrical isolation between the input and output stages. Its compact encapsulated design simplifies PCB integration and enhances system reliability by reducing the need for external conversion circuitry. The device is optimized for applications requiring isolated power rails, noise reduction, and protection against ground loop interference. Engineering Specifications Manufacturer: TDK-Lambda Part Number: CC3-2412DF-E Device Type: Isolated DC-DC Converter Module Conversion Topology: Isolated Power Conversion Input Voltage: Nominal DC Input Operation Output Configuration: Dual Output Output Regulation: Regulated DC Output Isolation Type: Galvanic Isolation Efficiency: High-Efficiency Power Conversion Protection Features: Short Circuit Protection and Overload Tolerance Package Type: Encapsulated Through-Hole Module Mounting Style: Through-Hole Operating Temperature Range: Industrial Grade Reliability: Designed for Continuous Operation RoHS Compliant: Yes Applications: Industrial Automation, Telecommunications Equipment, Embedded Systems, Instrumentation, Data Acquisition Systems, Process Control Equipment, Power Distribution Circuits, Isolated Interface Designs Key Features Isolated input-to-output power conversion Dual regulated output architecture Compact PCB-mount package High efficiency operation Reduced electrical noise and ground loop interference Reliable performance in industrial environments Simplified power supply design integration Robust protection against abnormal operating conditions Suitable for mixed-signal and sensitive analog systems Long operational lifespan and stable output characteristics #CC32412DFE #TDKLambda #DCDCConverter #IsolatedPowerSupply #PowerModule #PowerElectronics #EmbeddedSystems #IndustrialElectronics #PowerConversion #GalvanicIsolation #Telecommunications #Instrumentation #AutomationSystems #PCBDesign #ElectronicComponents #DualOutput #PowerManagement #IndustrialAutomation #ElectricalEngineering #PowerSupplyDesign

3 Channel AFE 24 Bit 28-WQFN (5x5) ADS1293CISQ/NOPB is a highly integrated, low-power 3-channel ECG Analog Front-End (AFE) from Texas Instruments. It is designed for portable and battery-powered medical devices, fitness monitors, heart-rate monitoring systems, Holter monitors, and other electrocardiogram (ECG) applications. The device integrates signal acquisition, filtering, lead-off detection, right-leg drive generation, and high-resolution analog-to-digital conversion into a single IC, reducing external component count and system cost. Key Features Three high-resolution ECG acquisition channels 24-bit analog-to-digital conversion Simultaneous pace detection support Ultra-low power consumption of approximately 0.3 mW per channel Low input-referred noise of 7 µVpp (40 Hz bandwidth) Programmable sample rates up to 25.6 ksps Differential input voltage range of ±400 mV Integrated EMI-hardened input filters Flexible input routing matrix Built-in Right-Leg Drive (RLD) amplifier AC and DC lead-off detection Integrated Wilson and Goldberger terminal generation Battery voltage monitoring capability Internal oscillator and voltage reference ALARMB pin for interrupt-driven diagnostics and fault reporting Multiple power-down and standby modes for battery-powered systems SPI-compatible digital interface Operating temperature range: –20°C to +85°C 28-pin WQFN package (5 mm × 5 mm) Typical Applications Portable 1-, 3-, 5-, 6-, 7-, 8-, and 12-lead ECG systems Holter monitors Event recorders Telemedicine devices Patient vital-sign monitoring equipment Automated External Defibrillators (AEDs) Sports and fitness heart-rate monitors Wearable medical devices Hashtags #commonpartslibrary #integratedcircuit #TexasInstruments #ADS1293 #AFE #AnalogFrontEnd #ECG #Electrocardiogram #MedicalElectronics #HealthTech #WearableDevices #HeartRateMonitor #PatientMonitoring #BiomedicalEngineering #24BitADC #LowPowerDesign #SPI #SignalConditioning #PortableMedicalDevices #HolterMonitor #Telemedicine #VitalSignsMonitoring #EmbeddedSystems #MixedSignalIC #WQFN28 #BatteryPoweredDevices #MedicalInstrumentation