CNC hydraulic press brake controller with STM32H743, ADS1256, 5x DAC8501 ±10V outputs, 3x AD598 LVDT interfaces, isolated 24V digital inputs, 100BASE-TX Ethernet, watchdog, E-stop hardware disable, and 4-layer 220mm x 160mm PCB architecture. Domains: field 24V I/O, precision analog, logic/Ethernet. Safety behavior: E-stop and valve-disable force all analog command outputs to 0V-safe state and disable field enables; watchdog and power-good supervisor reset MCU on comms or rail faults. PCB constraints: L1/L4 signal+components, L2 solid GND, L3 power plane, 1.0mm board inset margin, RJ45 at edge, field connectors on opposite edge, isolation corridor between field wiring and logic/Ethernet, 4x M4 plated mounting holes inset 10mm from corners.

Fortunate Moccasin Lightcycle - Added isolated AMS1117-3.3 regulator module (VIN/3V3/GND header) with input/output capacitors; not connected to existing nets

32-Channel +/-10V Isolated Industrial DAQ with CAN/CAN-FD and DWIN HMI

SmartDeskPet v1.0 Shield Stage 1 status: - Goal: 5V input -> dual AMS1117-3.3 rails (+3V3_MCU and +3V3_WIFI) with common GND. - Note: Keep power nets explicitly named (avoid unnamed nets) to keep ERC happy. Stage 1 completion checklist: - Mark J1 Pin_1 (+5V) as a Power Output pin to satisfy ERC power-driver checks. - Verify all GND symbols/returns are on the same GND net. - Keep +5V_SERVO isolated from the main +5V net (only share GND). Stage 2 preparation notes (MPN/LCSC + layout constraints): - MPN/LCSC targets to define before Stage 2 exit: - AMS1117-3.3 (SOT-223): set exact MPN and (optionally) LCSC PN for both U1 and U2. - 100nF capacitor (0603): set MPN/LCSC for all 0603 100nF decouplers. - 4.7k resistor (0603): set MPN/LCSC for I2C pull-ups R1 and R2. - 1000uF bulk capacitor (radial): set MPN/LCSC for C7 (CP_Radial_D10.0mm_P5.00mm). - DC005 power jack/regulator input: select exact DC005 footprint + MPN/LCSC (if used). - 2.54mm headers/sockets: set MPN/LCSC for H1, H2, J1, J3, J4, J5, P3, P4, P5, and J2. - ESP-01S antenna keepout: - Reserve a copper keepout under and in front of the ESP-01S onboard antenna. - No copper pours/traces/components in the antenna region (top and bottom) per module guidelines. - H1/H2 header spacing: - Maintain 1000 mil spacing between H1 and H2 header centerlines (shield mechanical requirement). - Silkscreen placeholders: - Add silkscreen labels for: 5V IN, GND, +3V3_MCU, +3V3_WIFI, SERVO1, SERVO2, I2C SDA/SCL, DHT11, ASRPRO UART2, ESP-01S UART3. - Add placeholder text for: MPN, LCSC, board revision, and date code. Stage 3 layout constraints (placement and routing guidance): - Connector placement strategy: - Place H1 and H2 first to lock the shield mechanical interface; enforce 1000 mil spacing. - Place J1 and any DC005 input at the board edge for easy access. - Designated power area planning: - Group U1, U2, and C7 near the 5V entry point; keep high-current 5V and regulator loops short. - Use wide copper for +5V and any servo supply; stitch GND around power section. - Antenna keepout boundaries: - Place J2 (ESP-01S socket) at a board edge with the antenna facing outward. - Enforce a top-and-bottom copper keepout in the antenna region; keep noisy power traces away.

40×30 mm 4-Layer FCBoard with dual JST-GH 1.25 mm top-entry GH-6 connectors for PWR1/PWR2, SWD 1.27 mm debug-only connector, dual 5 V ideal-diode ORing, isolated USB_5V, dedicated nets (PWR1_5V, PWR2_5V, 5V_IO, 5V_SENS, 3V3_MCU, 3V3_IMU_A/B/C), per-IMU LDOs with inline ferrites and decoupling, and MCU VDDA ferrite isolation #JSTGH #CubeGrade #PowerArchitecture #FCBoard

USB-Powered Seeed Studio XIAO nRF54L15 Module as Electrically Isolated Placeholder from TPS61088 Boost Converter Section

10 W IEC 62368 Class II Isolated Flyback AC/DC Converter (85–305 Vac to 5 V @ 2 A, 80% Efficiency, 6 mm Creepage, EE-Core Transformer, 90 °C Ambient) #flyback #classII #EEcore

Isolated Polyphase IIoT Energy Meter with ESP32-S3-WROOM-2-N32R16V & ADE9000 | UART Programming Pads | 100 nF Per-VDD Decoupling + 10 µF Bulk on 3.3 V Rail | Defined RF Antenna Keepout | USB-C UFP 5 V Input with eFuse | Maintained HV/LV Isolation

230 VAC to Dual Isolated 5 V / 3.3 V DC Power Supply with Input Protection and EMI Filtering

EcoCore ESP32 Reference Board – Final Net Mapping, Protection Ratings, 4-Layer PCB Prep, and Integrated USB-C Programming Interface with USB-UART Bridge, CC Pull-Downs, Low-Capacitance ESD Protection, and Isolated USB 5V / 5V Actuator / 12V Rails (with Verified DRC/ERC Status and Pre-Production Layout Checklist)

PaymentSoundBOX – ESP32 MQTT-Enabled Battery Audio Notifier with Isolated Power, I2S Audio Chain & Integrated UI

4U Rack-Mount MPCP Server for High-Performance Telco & Cloud – Redundant, Isolated Multi-Rail Power, High-Speed I/O, Advanced Monitoring

ESP32-S3-PLC For Home and Small Industry, include 8 12V SSR to control DC and AC Current, 8 isolated I/O and a ESP32 as a brain with a USB C to upload the code and the connectivity advantages of the ES32 like WIFI and Bluetooth.

ESP32-S3-PLC For Home and Small Industry, include 8 12V SSR to control DC and AC Current, 8 isolated I/O and a ESP32 as a brain with a USB C to upload the code and the connectivity advantages of the ES32 like WIFI and Bluetooth.

Universal 100–240 VAC 15 A DMX/RDM Relay with Isolated RS‑485, Modular IEC60320/XLR3 I/O, Inrush/Surge Protection, and RDM-Configurable Addressing

8 Solid State Relays Module, isolated and protected for safer use with microcontrollers.

The Si824x family from Skyworks Solutions, Inc. includes high-side/low-side isolated drivers specifically designed for high-power (>30 W) audio applications, providing versions with peak output currents of 0.5 A (Si8241) and 4.0 A (Si8244). These drivers operate with a maximum supply voltage of 24 V and feature an innovative isolation technology that offers up to 2500 V input-to-output isolation and up to 1500 Vrms output-to-output isolation, enabling level translations of signals without additional external circuits. Key features include a high-precision linear programmable dead-time generator ranging from 0.4 ns to 1 us, robust transient immunity of over 45 kV/us, a wide operational temperature range from -40 to +125 °C, and overlap protection to prevent shoot-through current damage. The Si824x components are RoHS-compliant and come in a 16-pin narrow body SOIC package, making them suitable for integration in space-constrained designs. These characteristics make the Si824x family ideal for use in Class D audio amplifiers and other high-side/low-side driving applications where high noise immunity and precise timing control are critical.

The AON7292 from Alpha & Omega Semiconductor is a high-performance, 100V N-Channel MOSFET utilizing the latest Trench Power AlphaMOS (aMOS MV) technology. This component is optimized for fast-switching applications and features very low RDS(ON) values, with <24mΩ at VGS=10V and <32mΩ at VGS=4.5V, making it ideal for synchronous rectification in DC/DC and AC/DC converters, as well as isolated DC/DC converters in telecom and industrial applications. The AON7292 is housed in a compact DFN 3.3×3.3 package and complies with RoHS and Halogen-Free standards. Key specifications include a continuous drain current of 23A at Tc=25°C, a pulsed drain current of 45A, and a maximum power dissipation of 28W at Tc=25°C. The component also boasts low gate charge characteristics, with a total gate charge of 17nC at VGS=10V, ensuring efficient operation in high-speed switching environments. Additionally, it has been rigorously tested for Unclamped Inductive Switching (UIS) and gate resistance, ensuring reliability and performance in demanding applications.

UL-listed fire alarm signaling IoT device using STM32H757, dual Quectel EC21-AUV cellular modules, USB-C programming, LCD UI, dual SIM, dual antenna ports, 8 inputs, and isolated/dc-dc-coupled Quectel power/interface domains.

Low-voltage control and power-control electronics for a 10-channel 220 V AC power sequencer using ESP32, shift registers, OLED display, and isolated/high-current AC sections to be added later.

48V tether-powered Ethernet-to-WiFi bridge using Blue Robotics Fathom-X style tether interface and ESP32-S3 WiFi output, with isolated/buck DC/DC rails for the tether interface and ESP32.

System Architecture Overview with PWM Interface, Power Stage, Protections, EMI Filters, Connectors, Hall-Effect Current Monitoring, 4-pin JST-XH Control Header, Isolation & Default-OFF PWM Behavior, Compact Mechanical Layout #hall-sensing #isolated-control #compact-layout