Important Note: You must connect your own SPI/ICSP programming header if you want to burn the Arduino bootloader to the MCU. SMD Manufacturing: Need a hotplate and solderpaste Good to haves: - Oscillator Decoupling Caps Expose UART via connector Programming Button Onboard LED Reset Button You don't have to populate everything! Only these are mandatory: Reset Button Find the reference schematic here: https://www.arduino.cc/en/uploads/Main/ArduinoNano30Schematic.pdf

IMPORTANT NOTICE: Hey, I opened editing permissions and this doc is broken, see the frozen version here: https://www.flux.ai/markwuflux/on-air-markwu2001-remix-r1-backup-freeze-0b49 R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

Important Note: You must connect your own SPI/ICSP programming header if you want to burn the Arduino bootloader to the MCU. In this version, you must also provide your own UART interface. SMD Manufacturing: Need a hotplate and solderpaste Good to haves: - Oscillator Decoupling Caps Expose UART via connector Programming Button Onboard LED Reset Button You don't have to populate everything! Only these are mandatory: Reset Button Find the reference schematic here: https://www.arduino.cc/en/uploads/Main/ArduinoNano30Schematic.pdf

This project involves a Charge-Coupled Device (CCD) constructed with key components including a TCD1103GFG integrated circuit, SN74AC04PWR IC, several resistors and capacitors, a MMBT5401 transistor, and a 6-pin connector. The design demonstrates a simple CCD application. #referenceDesign #project #sensor #CCD #image

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

50 Position FPC Connector Contacts, Bottom 0.020" (0.50mm) Surface Mount, Right Angle #CommonPartsLibrary #Connector #FFC #FPC #OPU #62684

Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

This project is a communication device designed with Adafruit's 3857 Microcontroller (U1) and Hoperf's RFM95W-915S2 RF module (U2). The microcontroller interfaces with the RF module via SPI protocol for wireless data transmission. The project also includes a capacitor (C1) and an SMA connector (J1). #LoRa #IoT #project #M4 #Adafruit

Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

R2 changes: -Moving to Letter Modules for ease of design -Adding ESP32 for WiFi On/Off and intensity control -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: Adjustable Brightness, 85-90% Drive Efficiency <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template

Power supply for 3.3V from a 2S LiPO using an XT30 connector

This surface-mount edge connector is designed specifically for the micro:bit. It's very slim and fully SMT. It also only has contacts on one side, just like the 'bit. This version is a Straight style where the micro:bit plugs-in perpendicular to the PCB.

Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

This project is a distance detecting sensor circuit build around GP2Y0D805Z0F IC from SHARP/Socle Technology. It includes decoupling capacitors, feedback resistors, and a LED for signal indication, with power being supplied via the J1 connector. #referenceDesign #industrialsensing #sharp #template #reference-design

Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

This is the CE1206000110111 (Cool Edge 0.80mm 60+2) connector trace for developing boards with this connector #0.8mm #60 #2+2power #connector #part

Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

Haptic Glove Controller Board NUCLEO-F411RE based Fixed Servo Connections to match standard servo wiring Revised footprint of 2n3904s transistors since base and emitter footprint were swapped Larger power traces Swapped SDO and SDI of SPI Lines to the FPC connector so it matches with peripheral.

R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C.

Connector Header Through Hole 5 position 0.059" (1.50mm) #commonpartslibrary #connector #jst #pinheader #tht

GCT_USB4105_REVA USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Surface Mount, Right Angle; Through Hole In Stock None Global Connector Technology None https://pricing.snapeda.com/search/part/USB4105/?ref=eda USB4105 Aliases: undefined

100 Position Connector Receptacle, Center Strip Contacts Surface Mount Gold #CommonPartsLibrary #Connector #Rectangular-Connector #Array #Edge-Type #Mezzanine #DF40C

I have a 128x64 mini-LCD display which only has EXP1 and EXP2 connectors. BigTreeTech released Manta M8P V2.0 and replaced the EXP1+EXP2 connectors with a single 18-pin FPC connector. So I designed this adapter. This is a work in progress.

an air monitoring system contains three sensors of gas, temperature and hunidity represented in the schematic by hree connectors and the system will be controlled by an stm32f103c8t6 MCU , it will contains also a regulator , a led for he detection of power , a connector and some resistors.

This project is a reference design for a UJA1166ATK-based circuit, implementing CAN protocol interface with Wake-up, Inhibit, and Sleep functionality. CANBus have block terminal connector and surface mount test points. #referenceDesign #project #CANbus #interface #transceiverCircuit #UJA1166ATK #UJA1166ATK/0Z #referenceDesign #canbus #nxp #template #reference-design

20-W MONO CLASS-D AUDIO POWER AMPLIFIER with terminal block connector for a speaker

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

This is a reference design of the Bluetooth Low-Energy (BLE) temperature sensor. It uses an ESP32-MINI-1 microcontroller to connect to an SHT31-DIS-B2.5KS sensor. The sensor can be powered through connector J15, and additional components provide voltage regulation and derbiaising. Temperature data can be accessed via BLE. #referenceDesign #simple-embedded #espressif #template #reference-design

A WIP power connector interface (i.e. even smaller than mito) to make small rechargeable Lithium cells easily swappable

Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

This project is a reference design for a UJA1166ATK-based circuit, implementing CAN protocol interface with Wake-up, Inhibit, and Sleep functionality. CANBus have block terminal connector and surface mount test points. #referenceDesign #project #CANbus #interface #transceiverCircuit #UJA1166ATK #UJA1166ATK/0Z #referenceDesign #canbus #nxp #template #reference-design

2.54mm Straight 2x5P 5 Push - Pull 2.54mm 2 Plugin,P=2.54mm IDC Connectors ROHS #CommonPartsLibrary #Connector #IDC #THT

R2 changes: -Moving to Letter Modules for ease of design -Adding ESP32 for WiFi On/Off and intensity control -Optional: Add unpopulated AA Battery Holder for battery option R1 changes: -Changed LED part to Red LEDs -adjusted resistor value of buck converter -Changed source for USB-C Connector -Removed exposed soldermask on buck converter with negative soldermask expansion -Order with black soldermask Modified by markwu2001: - Adjustable Brightness, - 85-90% Drive Efficiency - <5W Operation (Can use 5V 1A Plug) This project can be purchased from LCSC Original Description: Daddy's second circuit board. A sign to let my wife know when I'm on a call. Activates with a slide switch and is powered by USB-C. #template

Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

Reference design for Li-ion single cell charger based on TP4056 IC. Rprog setting output current to 900mA. VIN and BAT connector are block terminal connectors. #project #Template #referenceDesign #charger #TP4056 #referenceDesign #batterycharger #template #bms #reference-design

This project is a QRE1113 opto-reflective sensor circuit, using a 47K pull-up resistor (R2) and a 100 Ohm resistor (R1). It includes a 1µF capacitor (C1) for stability and attaches to a JST connector (J1) for easy interfacing. Power is provided via VCC, with the output signal (OPTO_OUT) fed back. #referenceDesign #industrialsensing #onsemi #template #reference-design

This project is a plant care system that uses an ESP32-S3-MINI-1U-N8 microcontroller to automate plant care tasks. This system includes three Songle relays, multiple resistors, capacitors, and transistors, all powered at 3.3V, 5V, or 12V. It also incorporates a USB Type-C connector. #referenceDesign #edge-computing #edgeComputing #espressif #template #iot #ESP32 #relay #reference-design

Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

Connector Header Through Hole 5 position 0.059" (1.50mm) #commonpartslibrary #connector #jst #pinheader #tht

Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project

Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part

Raspberry Pi 2, 3, 4, 5 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #Raspberry_Pi #Shield #RPi #template #part