Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

Important Note: You must connect your own SPI/ICSP programming header if you want to burn the Arduino bootloader to the MCU. SMD Manufacturing: Need a hotplate and solderpaste Good to haves: - Oscillator Decoupling Caps Expose UART via connector Programming Button Onboard LED Reset Button You don't have to populate everything! Only these are mandatory: Reset Button Find the reference schematic here: https://www.arduino.cc/en/uploads/Main/ArduinoNano30Schematic.pdf

A custom ATMega328P Board - Based on the Arduino Nano - USB Type C Capable

Welcome to your new project. Imagine what you can build here.

Welcome to your new project. Imagine what you can build here.

This is the multipurpose PCB that works with Arduino Nano, a way that you can run 2 Stepper motors, 2 DC motors, 2 Servo motors at the same time and this is not it you can even connect BT module, rotary encoder, I2C device, potentiometer at same time. This PCB is very much helpful in building any project and no need to worry about messy wire connections.

This is the multipurpose PCB that works with Arduino Nano, a way that you can run 2 Stepper motors, 2 DC motors, 2 Servo motors at the same time and this is not it you can even connect BT module, rotary encoder, I2C device, potentiometer at same time. This PCB is very much helpful in building any project and no need to worry about messy wire connections.

A 5V power supply for solderless bread board designed.