Part Verification and Discrepancies

flux

4:33

General
Project
BOM
File
Knowledge Base
PCB Layout
Web

Verifying component details.

Extracting part details.

Getting datasheet and footprint info.

Gathering component details.

Using Knowledge Base Tool.

Using BOM Tool.

Using PCB Layout Tool.

Looking for "pin definitions table" in 2312201733_Espressif-Systems-ESP32-C3_C2838500.pdf

Looking for "pin layout or pin configuration" in 2312201733_Espressif-Systems-ESP32-C3_C2838500.pdf

Looking for "package information mechanical dimensions QFN-32 5x5" in 2312201733_Espressif-Systems-ESP32-C3_C2838500.pdf

Looking for "recommended PCB land pattern QFN32" in 2312201733_Espressif-Systems-ESP32-C3_C2838500.pdf

Looking for "exposed pad (EP) and thermal pad recommendations" in 2312201733_Espressif-Systems-ESP32-C3_C2838500.pdf

Looking for "absolute maximum ratings supply voltage VDD3P3" in 2312201733_Espressif-Systems-ESP32-C3_C2838500.pdf

Searching web for: "ESP32-C3FH4 datasheet variants package QFN32 5x5 pinout"

Found 1 results.

Using PCB Layout Tool.

Planning component verification and reporting.

Preparing verification table.

Here is a cross-check of the ESP32-C3 (QFN-32 5x5) part in this project against the Espressif datasheet and web references. I verified pins/pinout, footprint, and metadata, and I list discrepancies and recommendations at the end.
Summary verification table

Table

ItemDatasheet / Web referenceIn projectStatus / Notes
Device/variantFamily datasheet covers ESP32-C3, ESP32-C3FN4, ESP32-C3FH4 (all QFN32 5x5 EP; same pinout) [Datasheet], [Espressif docs]Project title suggests “ESP32-C3FH4”, properties list MPN “ESP32-C3”Variant not explicit; see discrepancies
Pin count32 leads + exposed pad (EP) used as GND. Pin numbering CCW from Pin 1 (top view) [Datasheet: Fig 2-1]33 pads present in footprint (32 perimeter + 1 EP)Matches
Pin names/pinoutFull consolidated pin list: LNA_IN, VDD3P3 (x2), XTAL_32K_P, XTAL_32K_N, GPIO2, CHIP_EN, GPIO3, MTMS, MTDI, VDD3P3_RTC, MTCK, MTDO, GPIO8, GPIO9, GPIO10, VDD3P3_CPU, VDD_SPI, SPIHD, SPIWP, SPICS0, SPICLK, SPID, SPIQ, GPIO18, GPIO19, U0RXD, U0TXD, XTAL_N, XTAL_P, VDDA (x2), GND [Datasheet: pin table]All 33 names present as pads in footprint (duplicates represented as VDDA and VDDA__1, VDD3P3 and VDD3P3__1)Matches
Pin 1 indicatorTop-view CCW numbering from Pin 1, marker at corner [Datasheet]Footprint contains pin-1 marker (silk circle) in payloadMatches
PackageQFN-32 (5×5 mm) with EP [Datasheet: Figure 5-1]Footprint module name “QFN50P500X500X90-33N”Matches type/size
Pitch0.50 mm (QFN50P) (package family)Footprint indicates 0.50 mm pitch (pad rows at ±2.45 mm; pad size 0.27×0.81)Consistent; see land pattern note
Land patternDatasheet references “source file of recommended PCB land pattern” and hardware design guide [Datasheet: Packaging]Footprint pads are 0.27×0.81 mm; EP = 3.7×3.7 mm; paste is tiled via 9 paste apertures; perimeter pad round-rects; pin-1 silk;Looks consistent; numeric targets not explicitly listed in this PDF
Exposed pad/thermalEP connected to GND; thermal considerations recommended [Datasheet]EP present (pad 33). Footprint also includes an internal thermal via array (thru-hole pads 34–49) inside EPHardware support present; see connectivity note
Supply voltageInput power pins allowed input voltage –0.3 to 3.6 V [Datasheet: Abs Max]Project description shows “3V~3.6V”Consistent with datasheet limit
Schematic symbolSymbol should expose 32+1 pins with correct numbers/namesSchematic contains only 33 “Terminal” components; no MCU symbol instance or pin-numbered symbolMissing symbol; see discrepancies
BOM presenceMCU IC should appear in BOMBOM lists only “Terminal” items; no MCU deviceNot in BOM; see discrepancies
Metadata/propertiesUse exact MPN (e.g., ESP32‑C3FH4) and manufacturer, datasheet URLProject properties list Manufacturer “Espressif Systems”, Datasheet URL present; MPN is “ESP32-C3”Incomplete MPN specificity; see discrepancies
References used
Discrepancies and issues found
  • Missing schematic symbol: The project has only 33 standalone terminals and no MCU symbol instance. Without a proper symbol (32 perimeter pins + EP pad) and pin numbers, electrical connectivity cannot be validated or netlisted correctly.
  • MCU not in BOM: There is no MCU IC in the BOM; only “Terminal” items. This prevents sourcing and DFM checks for the chip.
  • MPN not specific: Properties list MPN “ESP32-C3”; project title implies “[ESP32-C3FH4]”(ESP32-C3FH4). If the intent is the in-package 4 MB flash, high-temperature part, set the MPN to ESP32‑C3FH4 (or the exact ordering code you will buy). If using the base die without in-package flash, keep ESP32‑C3, but that conflicts with the “FH4” in the title.
  • EP/thermal vias connectivity: The footprint includes a thermal via array inside the EP, but the design currently has no nets. Ensure pad 33 (EP) and the thermal via array are tied to the GND net in the schematic/layout. If left unconnected, thermal and RF/EMI performance will be compromised.
  • Land pattern numeric confirmation: The datasheet you provided points to an external land-pattern source file for exact pad dimensions. The footprint’s 0.27×0.81 mm pad size and 3.7×3.7 mm EP look reasonable for QFN32 5x5, but you should confirm against Espressif’s recommended pattern (or IPC-7351 nominal) for final production.
Recommendations to resolve
  • Add the correct MCU symbol and link it to the existing footprint, ensuring the pin numbers map exactly to the datasheet sequence (1..32 CCW, plus EP=GND).
  • Update MPN to the exact ordering code you intend to purchase: ESP32‑C3 vs ESP32‑C3FH4 (or FH4X/FH4AZ if applicable). Include flash size and temperature grade in properties to avoid ambiguity.
  • Ensure EP (pad 33) and the internal thermal vias are assigned to the GND net and that paste apertures follow Espressif’s guidance (tiled paste to control voiding).
  • Confirm the footprint dimensions against Espressif’s recommended land pattern from their packaging files or hardware design guide; adjust pad length/width and EP size if needed.
  • Populate the BOM with the MCU so availability, lifecycle, and pricing can be tracked. Also consider a second source or variant backup per best practice.
If you want, I can:
  • Create/attach a proper 33-pin schematic symbol mapped to this footprint.
  • Update the project properties (exact MPN, flash size, temp grade).
  • Connect EP and thermal vias to GND once a GND net exists.
Ask for symbol creation
Clarify exact variant
Check footprint dimensions
Thermal/GND connection guidance
BOM and sourcing question
65 days

Ready.

Sign up to send
MTMS
SPICS0
LNA_IN
GPIO10
MTDI
MTDO
VDDA
XTAL_32K_P
XTAL_N
SPICLK
CHIP_EN
U0TXD
GPIO3
GPIO8
SPIQ
VDD3P3__1
GPIO18
GPIO9
XTAL_32K_N
VDDA__1
U0RXD
MTCK
GND
SPID
SPIHD
VDD3P3
VDD3P3_CPU
SPIWP
VDD3P3_RTC
GPIO2
VDD_SPI
GPIO19
XTAL_P
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
    jharwinbarrozo
    15.2k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
    jharwinbarrozo
    1.1M

Inspect

ESP32-C3FH4 (no gnd vias)

ESP32-C3FH4 (no gnd vias)
Description

Created
Last updated by jharwinbarrozo
2 Contributor(s)
ryanf
jharwinbarrozo

Controls

Properties

Part Type
Integrated Circuit
Manufacturer Part Number
ESP32-C3
Designator Prefix
IC

Availability & Pricing

DPNStockQty 1
30–4.8K$1.00001–$1.10
10$1.9879
11.7K$1.00
15K$1.92

Assets