Component Block Diagram Request

flux

0:32

Chat History
Project
Arduino Uno R3 Shield Template
C1
C2
D1
DS1
H1
H2
H3
H4
IC1
IC2
IC3
J1
J6
RPi1
U1
U3
U4
Understood. Here’s a concise high-level block overview listing each selected component with its role and, where available from your project, the manufacturer part number (MPN).
  • J1 — 5051101692 (Molex)
    Role: PCIe-related connector in your schematic nets (CLK, RX, TX, PWR_EN, RST_B, etc.).
  • IC2 — PAM8403DR (Diodes Incorporated, MPN: PAM8403DR)
    Role: 3 W stereo class-D audio power amplifier.
  • U1 — SN74LVC2T45DCUR (Texas Instruments, MPN: SN74LVC2T45DCUR)
    Role: Dual-bit bidirectional voltage-level translator with direction control.
  • H3 — M2106-2545-AL (Manufacturer per library entry: Multicomp Pro/Molex-style header family; exact vendor varies by library entry)
    Role: Board-to-board/header interface.
  • IC3 — STUSB4500QTR (STMicroelectronics, MPN: STUSB4500QTR)
    Role: USB Type-C/PD sink controller.
  • RPi1 — Raspberry Pi 2/3/4/5 Model B (Raspberry Pi)
    Role: Host SBC footprint/template for a Raspberry Pi HAT.
  • IC1 — SN65DSI83ZXHR (Texas Instruments, MPN: SN65DSI83ZXHR)
    Role: MIPI DSI to LVDS bridge.
  • H4 — M2106-2545-AL
    Role: Board-to-board/header interface (same series as H3).
  • C1 — Generic Capacitor
    Role: Decoupling/bulk/AC-coupling as assigned in circuit (value not set here).
  • H2 — M2106-2545-AL
    Role: Board-to-board/header interface (same series as H3/H4).
  • DS1 — Teensy 4.1 (PJRC)
    Role: Microcontroller module footprint.
  • C2 — Generic Capacitor
    Role: Decoupling/bulk/AC-coupling as assigned in circuit (value not set here).
  • U4 — MAX17262REWL (Analog Devices/Maxim Integrated, MPN: MAX17262REWL)
    Role: Fuel gauge IC for Li-ion with ModelGauge m5 EZ algorithm.
  • D1 — SP0503BAHT (Littelfuse, MPN: SP0503BAHT)
    Role: ESD protection array.
  • H1 — M2106-2545-AL
    Role: Board-to-board/header interface (same series as H2/H3/H4).
  • U3 — EA_eDIPTFT70-ATC (Electronic Assembly/Display Visions, EA eDIPTFT70-ATC family)
    Role: 7-inch TFT display module footprint/symbol.
  • J6 — USB type A_61400416021 (Würth Elektronik, MPN: 61400416021)
    Role: USB Type-A receptacle.
If you want, I can also format this as a simple text “connections map” showing the key nets between these blocks (e.g., PCIe CLK/RX/TX between J1 and net portals, power rails, USB path to IC3, display bridge from IC1 to U3).
Request connections map
Check U1 decoupling
Assign net classes
ESD diode placement
U3 decoupling values
202 days

Ready.

Sign up to send
C1
Capacitance
100n F
+5V
C2
Capacitance
100n F
J6
+3V3
D1
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
    jharwinbarrozo
    15.5k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
    jharwinbarrozo
    1.1M
Raspberry Pi 5 Hat with PCIe and Ardiono Bridge Including a Teensy 4 and ic3 chip with usb controller interface and serial commication bridge and a thumbnail
Template for Raspberry Pi 5 Model Shield. Include an official pinout so you will always know Raspberry Pi names, the alternative roles of pins, which one is SDA, or SCL, etc. On PCB you can find the 3D model of the Raspberry Pi itself along with the board outline on the silkscreen. #RaspberryPi #Raspberry #RaspberryPi5 #raspberry #Pi #RPi #Shield #template #project #project-template

Properties

Pricing & Availability

Distributor

Qty 1

Arrow

$5.80–$8.99

Digi-Key

$570.71–$574.07

LCSC

$598.89

Mouser

$575.81

TME

$0.57

Verical

$60.95–$64.43

Assets

Raspberry Pi 5 Hat with PCIe Template-removebg-preview.png

Raspberry Pi 5 Hat with PCIe Template-removebg-preview.png

Raspberry Pi 5 Hat with PCIe Template-removebg-previewThumbnail
raspberry-pi-5-sbc-simple.step

raspberry-pi-5-sbc-simple.step

raspberry-pi-5-3D3D Model
raspberry pi hat outline.svg

raspberry pi hat outline.svg

raspberry pi hat outlineDefault

Controls