Component Block Diagram Request
0:32
Understood. Here’s a concise high-level block overview listing each selected component with its role and, where available from your project, the manufacturer part number (MPN).
-
J1 — 5051101692 (Molex)
Role: PCIe-related connector in your schematic nets (CLK, RX, TX, PWR_EN, RST_B, etc.). -
IC2 — PAM8403DR (Diodes Incorporated, MPN: PAM8403DR)
Role: 3 W stereo class-D audio power amplifier. -
U1 — SN74LVC2T45DCUR (Texas Instruments, MPN: SN74LVC2T45DCUR)
Role: Dual-bit bidirectional voltage-level translator with direction control. -
H3 — M2106-2545-AL (Manufacturer per library entry: Multicomp Pro/Molex-style header family; exact vendor varies by library entry)
Role: Board-to-board/header interface. -
IC3 — STUSB4500QTR (STMicroelectronics, MPN: STUSB4500QTR)
Role: USB Type-C/PD sink controller. -
RPi1 — Raspberry Pi 2/3/4/5 Model B (Raspberry Pi)
Role: Host SBC footprint/template for a Raspberry Pi HAT. -
IC1 — SN65DSI83ZXHR (Texas Instruments, MPN: SN65DSI83ZXHR)
Role: MIPI DSI to LVDS bridge. -
H4 — M2106-2545-AL
Role: Board-to-board/header interface (same series as H3). -
C1 — Generic Capacitor
Role: Decoupling/bulk/AC-coupling as assigned in circuit (value not set here). -
H2 — M2106-2545-AL
Role: Board-to-board/header interface (same series as H3/H4). -
DS1 — Teensy 4.1 (PJRC)
Role: Microcontroller module footprint. -
C2 — Generic Capacitor
Role: Decoupling/bulk/AC-coupling as assigned in circuit (value not set here). -
U4 — MAX17262REWL (Analog Devices/Maxim Integrated, MPN: MAX17262REWL)
Role: Fuel gauge IC for Li-ion with ModelGauge m5 EZ algorithm. -
D1 — SP0503BAHT (Littelfuse, MPN: SP0503BAHT)
Role: ESD protection array. -
H1 — M2106-2545-AL
Role: Board-to-board/header interface (same series as H2/H3/H4). -
U3 — EA_eDIPTFT70-ATC (Electronic Assembly/Display Visions, EA eDIPTFT70-ATC family)
Role: 7-inch TFT display module footprint/symbol. -
J6 — USB type A_61400416021 (Würth Elektronik, MPN: 61400416021)
Role: USB Type-A receptacle.
If you want, I can also format this as a simple text “connections map” showing the key nets between these blocks (e.g., PCIe CLK/RX/TX between J1 and net portals, power rails, USB path to IC3, display bridge from IC1 to U3).
Request connections map
Check U1 decoupling
Assign net classes
ESD diode placement
U3 decoupling values
244 days
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.