Part Review and Datasheet Update

flux

Done — I found the official Vicor datasheet, added the missing Datasheet URL property, and checked the part against it. I used the datasheet as the source of truth and matched the pin count exactly, which is the right review method for a part project
Updated
  • Datasheet URL set to: https://www.vicorpower.com/documents/datasheets/ds_vi-j00.pdf
Part info review
Current project metadata:
  • Manufacturer Part Number: VE-J51-CW
  • Designator Prefix: PS
Datasheet-confirmed details:
  • Manufacturer: Vicor Corporation
  • Family: VE-J00
  • RoHS: VE = RoHS
  • Series: J00
  • Input code 5 = 150 V nominal, 100–200 V range
  • Output code 1 = 12 V
  • Grade C = -25 to +100 °C operating
  • Power code W = 100 W
  • Isolation: 3000 VRMS input-to-output
  • Efficiency (C/I/M grades): 80–90%
  • Mechanical family: Half-brick DC-DC converter
  • Pin count: 9
Symbol / pin audit
The datasheet pinout is:
  1. +In
  2. -In
  3. +Out
  4. Trim
  5. -Sense
  6. -Out
  7. Gate In
  8. Gate Out
  9. +Sense
Your current symbol terminals are:
  1. +IN ✅
  2. GATE_IN ❌ should be -IN
  3. GATE_OUT ❌ should be +OUT
  4. -IN ❌ should be TRIM
  5. +OUT ❌ should be -SENSE
  6. +SENSE ❌ should be -OUT
  7. TRIM ❌ should be GATE_IN
  8. -SENSE ❌ should be GATE_OUT
  9. -OUT ❌ should be +SENSE
Footprint audit
  • Footprint pad count is 9, so the pad count matches the datasheet.
  • But the pad names mirror the same incorrect symbol mapping above, so the footprint pin naming is also mismatched against the datasheet numbering/function table.
Pin description audit
  • I did not find Pin Description properties on the terminals.
  • So all pin descriptions are effectively missing and have not been populated from the datasheet function table.
Pin type audit
Current pin types are mostly generic Input / Output. That does not reflect the datasheet’s functional roles well:
  • +In, -In are supply input pins
  • +Out, -Out are output pins
  • Trim, +Sense, -Sense, Gate In, Gate Out are control/sense/interface pins
So the current pin typing is incomplete / not well aligned with the datasheet functions.
Key mismatches / gaps
  1. Major pin-number-to-name mismatch across the symbol
  2. Same mismatch propagated into the footprint pads
  3. Pin descriptions missing
  4. Metadata still incomplete:
    • Manufacturer Name missing
    • Part Type missing
    • Package or Case Code missing
Key specs summary
  • Isolated DC-DC converter
  • 150 V nominal input, 100–200 V range
  • 12 V output
  • 100 W
  • -25 to +100 °C operating grade
  • 3000 VRMS input-to-output isolation
  • 80–90% efficiency family spec
  • 9-pin half-brick module
If you want, I can fix the part next by:
  1. renaming the terminals to the correct datasheet pin functions,
  2. correcting the pin numbers / descriptions / pin types,
  3. and filling in the missing metadata fields.
Fix all mismatches
Review decoupling issues
Document part audit
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.4k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

VE-J51-CW

VE-J51-CW thumbnail
Isolated Module DC DC Converter 1 Output 12V 8.33A 100V - 200V Input The VE-J51-CW is an isolated DC-DC converter module from Vicor’s VE-J00 series, designed to convert a high DC input voltage into a regulated lower DC output for electronic systems. It is commonly used in industrial equipment, telecommunications, and embedded power systems where stable, isolated power conversion is required. Key Features Isolated DC-DC Converter Module Provides galvanic isolation between input and output for safety and noise reduction Input Voltage Range 100V to 200V DC input (nominal ~150V) Output Voltage 12V DC regulated output Power Rating Up to 100W output power High Efficiency Around ~90% efficiency depending on load conditions Isolation Voltage Up to 3kV isolation for high-voltage separation Form Factor Half-brick package Compact size: approx. 57.9 × 61 × 12.7 mm Output Capability Up to 8.33A output current (at 12V) Protection & Control Features Overcurrent protection (OCP) Short-circuit protection (SCP) Remote sense Logic disable / control functions Wide Operating Temperature Range Typically -25°C to +100°C Industrial Certifications UL, CSA, TUV compliant (varies by variant) Typical Applications Industrial automation systems Telecom and networking equipment Distributed power architectures High-voltage input DC power conversion systems Embedded power supplies in control systems #CommonPartsLibrary #Power-supply #VE-J00™ (100W)

Properties

VE-J51-CW

Vicor Corporation

Power Supply

vicorpower.com/documents/datasheets/ds_vi-j00.pdf

PS

creativecommons.org/licenses/by/4.0/

Pricing & Availability

See prices from popular manufacturers for your project.

Controls