Part Information Review and Datasheet Update

flux

I reviewed the part project against the available project data and the Samtec datasheet. Since a Datasheet URL was already present in the project properties, I did not overwrite it; the existing URL already points to the official Samtec drawing PDF, which is exactly what the part-project sync workflow recommends preserving when correct
Summary Project metadata review

Table

FieldCurrent project valueDatasheet / source checkStatus
Manufacturer Part NumberADM6-60-01.5-L-4-2-A-TRExact match to Samtec drawingOK
Manufacturer NameSamtecDatasheet shows SAMTEC, INC.OK
Part TypeConnectorsThis is a board-to-board / mezzanine connectorOK
Designator PrefixJAppropriate for connector partsOK
Datasheet URLSetAlready points to official Samtec PDFOK
Package or Case CodeTODatasheet identifies the ADM6 series / 4-row 0.635 mm connector family, not TOMismatch
DescriptionBoard to Board & Mezzanine Connectors 0.635mm Pitch High-Density 4-Row Header 240PConsistent with datasheet family / formatOK
Key specs pulled from the datasheet

Table

SpecValue
ManufacturerSamtec
MPNADM6-60-01.5-L-4-2-A-TR
Connector familyADM6
TypeHigh-density board-to-board / mezzanine header
Total contacts240 total
Rows4
Positions per row60
Pitch0.635 mm
Lead style1.5 mm
Plating-L = 10 µin selective gold in contact area, matte tin on tail
Termination option-2 = solder ball alloy option per drawing
Alignment feature-A = alignment pin present
Packaging-TR = tape and reel
MaterialsLCP insulator, copper alloy contacts
Those values come directly from the Samtec drawing extract returned by the file analysis, including the 4-row structure, 60 positions per row, 0.635 mm pitch, lead style, plating, alignment pin option, and packaging code
Schematic symbol cross-check What matches
  • The part project contains 240 terminal components, which matches the datasheet’s 4 rows × 60 positions per row = 240 contacts
  • The terminal naming scheme in the project is row/position based (A..., B..., C..., D...), which matches the datasheet’s row-based contact identification scheme with rows A, B, C, D and numbered positions
  • The datasheet does not provide functional signal names or per-contact electrical descriptions; it uses numbered contacts only. So having simple contact-number labels is appropriate for this connector family
Mismatches / issues

Table

ItemFindingSeverity
Pin numbering formatThe datasheet shows numbering like A01 and D01, while the project uses A1, B1, etc. for single-digit positionsMismatch
Pin type metadataAll terminals are currently Pin Type: UnspecifiedWarning
Pin descriptionsNo per-pin descriptions appear to be populatedWarning, but datasheet offers little beyond numbered contacts
Symbol side/group metadataNo evidence of richer connector grouping metadata in the current terminalsMinor
Important nuance
The Pin Type: Unspecified state is not necessarily wrong for this connector, because the datasheet does not classify each contact as input/output/power/etc. It does mean the symbol metadata is incomplete from a Flux-library quality standpoint, but not that the contact map conflicts with the datasheet. The part-project sync guidance explicitly says not to guess missing semantic pin types from memory and to use the datasheet as the source of truth
Footprint cross-check What matches
  • The layout contains a footprint with 240 pads, matching the expected 240 contacts from the datasheet.
  • The footprint also includes MH1 and MH2 mount/alignment-related pads/features, which is consistent with the selected -A alignment-pin option in the MPN and the drawing’s explicit -A: ALIGNMENT PIN note
What I could verify confidently

Table

CheckResult
Pad count vs datasheet contact countMatches
Row naming consistencyMatches A/B/C/D row scheme
Presence of alignment-related featuresLooks consistent with -A option
What I could not fully verify from the available project tool output
  • Exact pad geometry
  • Exact pad spacing and courtyard/body dimensions
  • Exact mechanical dimensions of the footprint relative to the datasheet drawing
The current layout tool output exposed the pad inventory and object structure clearly, but not enough dimensional detail to prove every land pattern measurement against the drawing. So I can say the footprint structure looks directionally correct, but not that the land pattern is dimension-perfect.
Pin description cross-check
The datasheet extract shows that this connector uses contact numbering only, with examples like PIN A01 and PIN D01, plus row labels A B C D; it does not provide functional pin descriptions such as power, data, shield, etc.
So:
  • No mismatch if the part uses simple numbered contacts only.
  • Minor quality issue that the project does not appear to include short pin descriptions like “Contact A01”, “Contact B17”, etc.
  • Do not invent electrical meanings for the pins, because the datasheet does not assign any.
Main issues to fix Recommended corrections

Table

PriorityIssueRecommended fix
HighPackage or Case Code = TO is incorrectReplace with something ADM6-specific / package-family-specific from the Samtec drawing
HighPins A1..A9, B1..B9, C1..C9, D1..D9 are not zero-paddedRename to A01..A09, B01..B09, C01..C09, D01..D09 if you want exact datasheet-style numbering
MediumAll terminal pin types are UnspecifiedAcceptable if left as-is, but could be normalized if you want library consistency
MediumMissing short pin descriptionsAdd simple numbered-contact descriptions if desired
LowDescription could be more crispCould be tightened to a function-first format per part-project guidelines
Bottom line Overall assessment
  • MPN, manufacturer, connector family, pitch, row count, and total contact count all check out against the Samtec datasheet.
  • Datasheet URL is already correctly set, so no web search/update was needed.
  • The biggest definite mismatch is the Package or Case Code property set to TO.
  • The biggest symbol mismatch is the non-zero-padded single-digit contact numbering versus the datasheet’s A01/D01 style.
  • No obvious contact-count mismatch exists: the project’s 240 terminals and 240 footprint pads line up with the datasheet’s 240-contact definition.
  • Pin descriptions are not contradicted by the datasheet, because the datasheet itself only gives numbered contacts, not functional per-pin roles.
If you want, I can next clean this up by:
  1. fixing the package/case property,
  2. renaming the single-digit contacts to zero-padded datasheet style, and
  3. populating simple contact descriptions for all terminals.
Fix all mismatches
Prioritize power parts
Check missing datasheets
Create review note
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.4k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

ADM6-60-01.5-L-4-2-A-TR

ADM6-60-01.5-L-4-2-A-TR thumbnail
240 Position Connector High Density Array, Male Surface Mount Gold The ADM6-60-01.5-L-4-2-A-TR is a compact board-to-board (BTB) mezzanine connector designed for high-density, low-profile interconnections between printed circuit boards (PCBs). It is commonly used in applications where space is limited but reliable multi-pin connectivity is required. Connector Type: Surface-mount, dual-row board-to-board connector Pitch: 1.5 mm Number of Positions: 60 pins Rows: 2 (30 pins per row) Mounting Style: SMT (Surface Mount Technology) Orientation: Typically vertical (mezzanine stacking) Contact Type: Female receptacle (usually mates with a corresponding male header) Compact Design: Optimized for space-constrained PCB layouts High Pin Density: 60 contacts in a small footprint Reliable Contact: Designed for stable electrical and mechanical connection Tape & Reel Packaging (TR): Suitable for automated assembly processes Stack Height: Fixed (around 4 mm, depending on variant) #CommonPartsLibrary #Connector #AcceleRate® ADM6

Properties

ADM6-60-01.5-L-4-2-A-TR

Samtec

Connectors

suddendocs.samtec.com/prints/adm6-xxx-xx.x-xxx-4-x-x-xr-mkt.pdf?_gl=1*16nu3ed*_gcl_au*MTQ1NzE2ODkxLjE3MzYzMTIyMjY.*_ga*NDI5NzEwNzA5LjE2ODc1MDk4MDM.*_ga_3KFNZC07WW*MTc0Mzc2OTE3Ny4yOTkuMS4xNzQzNzY5MjI5LjguMC4w

J

TO

creativecommons.org/licenses/by/4.0/

Pricing & Availability

See prices from popular manufacturers for your project.

Controls