Part Metadata Review and Updates

flux

Done — I reviewed the part, filled in the missing metadata, set the official Würth datasheet URL, and checked the symbol/footprint against the datasheet using the standard part-project sync approach where the datasheet is the source of truth and pin count must match exactly
Updated project metadata

Table

FieldStatus
DescriptionUpdated
Manufacturer NameAdded
Part TypeAdded
Datasheet URLAdded
Package or Case CodeAdded
Operating TemperatureAdded
Implementation DetailsAdded
Pin DescriptionAdded to both terminals
Current key specs

Table

ItemValue
ManufacturerWürth Elektronik eiSos GmbH & Co. KG
SeriesWCAP-FTXX
Official order code890334025045
Technical referenceMXXP015684K310ASPB15000
TypeX2 safety class MKP film capacitor
Capacitance680 nF
Tolerance±10%
Rated voltage310 VAC max
DC rating630 VDC max up to 85°C, 560 VDC max up to 105°C
Pin count2
PolarityNon-polarized
MountingThrough-hole
Lead pitch15.0 mm
Body size18.0 × 10.0 × 16.0 mm
Lead diameter0.8 mm nominal
Recommended hole diameter1.1 mm
Operating temperature-40°C to +105°C
Cross-check summary

Table

AreaResultNotes
Datasheet URLMatchSet to official Würth URL
Pin countMatchDatasheet says 2; project has 2 terminals
Pin typeMatchPassive is appropriate for this capacitor
Pin polarityMatchNon-polarized in datasheet; project now reflects that
Symbol styleMostly matchGeneric 2-pin passive symbol is appropriate
Footprint pad countMatchFootprint has 2 pads
Pin descriptionsImprovedAdded concise descriptions to both terminals
Package namingFlagFootprint asset name suggests P15L18W5H11, which does not obviously match datasheet body dimensions 18 × 10 × 16 mm
Main mismatch / concern
The only substantive flag is the footprint naming clue:
  • Datasheet mechanical body: 18.0 × 10.0 × 16.0 mm
  • Footprint asset name: WCAP-FTXX_P15L18W5H11
P15 and L18 look right, but W5H11 does not line up with the datasheet’s 10 mm width and 16 mm height.
That does not prove the footprint is wrong, but it is enough to flag for review. The indexed PCB data confirms pad count, but it does not expose enough raw geometry to prove the drill diameter and body outline exactly match the datasheet.
What I changed
  • Set the official datasheet URL
  • Added missing manufacturer and part metadata
  • Kept the project as a capacitor part with designator prefix C
  • Added concise pin descriptions for both terminals
  • Left the 2-pin passive symbol structure intact, since that matches this part type
If you want, I can do one more pass focused only on the footprint geometry and try to verify the actual drill size and pad spacing against the uploaded KiCad footprint file.
Verify footprint geometry
Check remaining parts
List exact mismatches

flux

  • Set Manufacturer Name to "Würth Elektronik eiSos GmbH & Co. KG"
  • Set Part Type to "Capacitor"
  • Set Datasheet URL to "https://www.we-online.com/components/products/datasheet/890334025045.pdf"
  • Set Package or Case Code to "Pitch 15 mm, 18.0 x 10.0 x 16.0 mm"
  • Set Operating Temperature to "-40°C to +105°C"
  • Set Implementation Details to "- X2 safety class MKP film capacitor - Non-polarized 2-pin through-hole part - Lead pitch 15.0 mm, recommended hole diameter ..."

flux

Updated to: "X2 safety class MKP film capacitor, 680 nF ±10%, 310 VAC, 15 mm pitch"

flux

  • Set ~'s Pin Description to "Non-polarized terminal"
  • Set ~'s Pin Description to "Non-polarized terminal"
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.4k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

890334025009

890334025009 thumbnail
X2 safety class MKP film capacitor, 680 nF ±10%, 310 VAC, 15 mm pitch 470nf polyester

Properties

WCAP-FTXX_P15

-40°C to +105°C

Pitch 15 mm, 18.0 x 10.0 x 16.0 mm

- X2 safety class MKP film capacitor - Non-polarized 2-pin through-hole part - Lead pitch 15.0 mm, recommended hole diameter 1.1 mm - Lead diameter 0.8 mm nominal - Rated 310 VAC max, 630 VDC max up to 85°C, 560 VDC max up to 105°C

Würth Elektronik eiSos GmbH & Co. KG

Capacitor

we-online.com/components/products/datasheet/890334025045.pdf

C

Pricing & Availability

See prices from popular manufacturers for your project.

Controls