prankishtick / Mammoth Black Liquid Breathing Apparatus

Loaded

0

0

Files

Schematic

PCB

Log InSign Up

Temperature and Humidity Sensor Design

flux

1:34

Outlining the Plan Steps.

Clarifying Component Linking in PLAN Mode.

Navigating Component Information in Planning.

Understanding Component Linking Rules.

Accessing knowledge base.

Drafting the Plan Steps.

I’ll build your low-power USB-C environmental node with dual-radio Wi‑Fi + BLE, a digital T/RH sensor, and a protected 5 V input sized for 0.5–3 A sources.
Plan:
  1. USB‑C 5 V sink, CC resistors, ESD; reverse/OVP/UVLO/OCP protection front end.
  2. 5 V→3.3 V synchronous buck (~1 A peak), bulk + ceramic decoupling; optional quiet LDO island.
  3. Ultra‑low‑power Wi‑Fi + BLE MCU; clocks, decoupling, 2.4 GHz antenna keep‑out.
  4. Digital T/RH sensor on I²C with 4.7 kΩ pull‑ups; careful placement.
  5. Connect nets, name rails, set RF clearance rules; run ERC/DRC.
Before I start:
  • MCU preference (ESP32-class SoC vs split radio + MCU)?
  • Sensor accuracy target (e.g., ±0.1 °C / ±1.5% RH class)?
  • Antenna type: PCB trace, chip antenna, or u.FL external?
Click Start on the plan when ready.
Plan
#Goal
  • Design a low-power USB-C powered environmental node that integrates dual-radio Wi‑Fi (802.11 b/g/n 2.4 GHz) and BLE 5.x connectivity, a digital temperature/humidity sensor, and a robust 5 V power input. The design must include comprehensive input protection (reverse polarity, OVP, UVLO, OCP) for a 0.5–3 A source while employing optimized decoupling and regulation for low-power operations.
#Implementation plan
  1. USB-C Power Input & Protection
    1. Add a USB‑C receptacle configured as a 5 V sink including CC resistors to ensure proper orientation detection.
    2. Integrate front‑end protection using a combination of an ideal diode/reverse polarity protection circuit along with dedicated OVP, UVLO, and OCP circuitry.
    3. Include ESD protection on the USB‑C CC, D+, and D− lines with bidirectional low‑cap TVS diodes (≤1 pF) and a specific USB‑C TVS for enhanced robustness.
  2. Power Regulation
    1. Incorporate a 5 V to 3.3 V synchronous buck converter sized for ~1 A peak current to supply the MCU and sensor core.
    2. Add appropriate bulk (electrolytic/tantalum) capacitors and low‑ESR ceramic decoupling capacitors for high‑frequency and energy storage.
    3. Create an optional quiet LDO island to power the sensors and RF sections with reduced noise.
  3. Compute and RF Section
    1. Select and add an ultra‑low‑power dual‑radio MCU that supports both 802.11 b/g/n Wi‑Fi and BLE 5.x.
    2. Place and configure critical decoupling (minimum 100 nF within 5 mm of each MCU VCC/GND pair) and clock components.
    3. Define a 2.4 GHz antenna keep‑out zone to ensure proper RF performance.
  4. Sensor Integration
    1. Add a digital temperature/humidity sensor with I²C interface.
    2. Connect 4.7 kΩ pull‑ups on the I²C lines and include decoupling capacitors near the sensor.
    3. Position the sensor away from heat sources to ensure accurate readings.
  5. Connectivity & Final Net Integration
    1. Connect all power and I/O nets appropriately, assigning clear names to the rails and signals.
    2. Annotate layout rules for antenna clearance and include stitching vias where needed to maintain RF integrity.
    3. Run ERC and DRC checks to validate the schematic and ensure all components meet the design criteria.
#Success criteria
  • USB‑C input circuitry provides robust protection for a 5 V source (0.5–3 A), including reverse polarity, OVP, UVLO, and OCP.
  • The power regulation solution reliably converts 5 V to 3.3 V with proper decoupling and optional low-noise LDO support.
  • The dual‑radio MCU implements Wi‑Fi (802.11 b/g/n) and BLE 5.x with adequate decoupling and RF layout provisions.
  • The digital temperature/humidity sensor delivers accurate I²C readings with required pull‑ups and decoupling.
  • The complete design passes ERC/DRC checks and is validated for both schematic integrity and PCB layout manufacturability.
Choose MCU family
Select T/RH sensor
Define USB-C protection
Pick antenna approach
Add I2C and pull-ups
156 days
​
Sign up to send

Reviews

  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    15.8k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M

Mammoth Black Liquid Breathing Apparatus

Mammoth Black Liquid Breathing Apparatus thumbnail
Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor

Qty 1

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

      Introducing AI Placement!
      AI Placement Demo

      AI-Powered Component Placement

      Let AI place your components intelligently. AI Placement analyzes your schematic and positions components for optimal routing, signal integrity, and board density.

      From Schematic to Layout in Seconds

      Skip the tedious manual placement. AI Placement generates a starting layout you can refine, saving hours of repetitive work on every new design.

      Works With Auto-Layout

      Pair AI Placement with Auto-Layout for a complete AI-driven PCB design flow — from component placement through trace routing, all with one click.

      Try it