USB-C Sensor Node Charging

Worked for 1 min 32 sec
Referenced guidance.
Thought for 15 sec — Searching for library schema
Created 6 tasks.
1/6 Rename project, create specification, and record initial requirements/power budget
Thought for 8 sec
Reading project docs.
Renamed USB-C WiFi BLE TH Sensor.
Updated project description.
Set Domain, Connectivity, Connectivity and 2 more.
Thought for 1 min 40 sec — Creating documentation and estimates
2/6 Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection

Rename project, create specification, and record initial requirements/power budget

Select library parts for MCU, T/RH sensor, USB-C input, regulator, and protection

Add main components and supporting passives to the schematic

Wire USB-C power/protection, 3.3 V rail, MCU boot/debug, USB data, I2C sensor, and indicators

Create firmware/regulatory/bring-up project files

Run schematic/design checks and fix actionable issues

Thought for 38 sec
Found 1 results for Select a low-power Wi-Fi plus Bluetooth LE 5.x MCU module for a USB-C powered consumer temperature/humidity sensor node. Need 2.4 GHz 802.11 b/g/n, BLE 5.x, native USB programming preferred, integrated antenna/certified module, 3.3 V operation, suitable Flux library part..
Found 3 results for Select a digital temperature and relative humidity sensor IC for an indoor consumer environmental node. Need I2C interface, 3.3 V operation, low power, good accuracy, SMD package, available Flux library part, modern non-EOL part..
Found 3 results for Select a USB-C receptacle for a 5 V sink-only consumer IoT sensor node. Need USB 2.0 data pins D+ D-, CC1 CC2 pins, SMD or hybrid mechanical shell, Flux library part with footprint..
Found 3 results for Select a 5 V USB input protection IC or eFuse/load switch for consumer USB-C powered IoT node. Need overvoltage protection, undervoltage lockout, overcurrent/current limit around 0.5 to 3 A capable sources, reverse-current blocking if possible, output to 3.3 V regulator, SMD Flux library part..
Found 2 results for Select a 5 V to 3.3 V regulator for ESP32-class Wi-Fi sensor node. Need low quiescent current, at least 600 mA transient capability, thermally suitable for USB 5 V to 3.3 V, SMD Flux library part. Buck or thermally capable LDO acceptable..
Found 2 results for Select USB ESD protection for USB 2.0 D+ D- lines and 5 V VBUS on a USB-C powered consumer IoT node. Need low capacitance data line TVS array and VBUS TVS/protection parts available in Flux library..
Created a project doc

Project Specification — USB-C WiFi BLE TH Sensor

View Document
Status: Draft schematic in progress. A consumer USB-C powered temperature and relative humidity sensor node with Wi-Fi and Bluetooth Low Ene...
Analyzing in depth.
Deeply thought for a moment
Thought for 3 sec
Deeply thought for a moment
Analyzing in depth.
Completed design checks.
Getting a schematic overview.
Getting a BOM overview.
Thought for 2 sec
Deeply thought for 41 sec
Analyzing in depth.
Reading project docs.
Deeply thought for 1 sec
Thought for 1 sec
Analyzing in depth.
Reading "project-specification-usb-c-wifi-ble-th-..." project doc.
Deeply thought for 16 sec
Thought for 1 min 27 sec
Thought for a moment
Choosing components for low-power MCU
I
murph2jp

murph2jp

add a lipo charging circuit that can handle charging of 300mA

flux

No design changes were made because no ACUs are currently available.
Remaining work:
  • Create the USB‑C 5 V input and reverse/OVP/UVLO/OCP protection.
  • Add the 3.3 V low-power Wi‑Fi/BLE MCU and digital temperature/humidity sensor.
  • Add a LiPo charger configured for 300 mA, including battery connector, charge/status indication, thermal considerations, and power-path/load-sharing so the node can operate while charging.
  • Verify current budgets, USB‑C limits, battery protection, ERC, and component footprints.
Add charger circuit
Find charger ICs
Show charger schematic
Add input protection
No schematic yet

Talk to Flux to get started.

  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.5k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

USB-C WiFi BLE TH Sensor

USB-C WiFi BLE TH Sensor thumbnail
Consumer USB-C powered environmental sensor node with Wi-Fi, BLE 5.x, digital temperature/humidity sensing, protected 5 V input, and a 3.3 V low-power MCU/sensor rail.

Properties

WiFi

USB-C

Consumer IoT

5

V

Bluetooth

Pricing & Availability

See prices from popular manufacturers for your project.

Controls