Pin Header Hole Size

O

ozalexm

For the selected "Pin Header 01x01 2.54mm Vertical - Circular Pad" component, report the actual metal pin dimensions, not the connector pitch.
Specifically provide:
  • Pin cross-section (width × thickness in mm and inches)
  • Whether the pin is square or round
  • Overall pin length
  • Exposed pin length above and below the plastic body
  • Recommended hole diameter
  • Manufacturer and manufacturer part number, if this part is based on a real component
Do not report the 2.54 mm pin spacing unless it is specifically requested.

flux

I’ll inspect the selected component metadata and any linked part/manufacturer data, then report only the actual pin/mechanical dimensions requested.

flux

I inspected the selected Flux part: it is a generic 1-pin through-hole terminal/header footprint, not a manufacturer-backed connector with a datasheet.

Table

Requested itemActual data available
Pin cross-sectionNot specified in the part
Pin shapeNot specified — no square/round metal pin geometry is defined
Overall pin lengthNot specified
Exposed length above plasticNot specified
Exposed length below plasticNot specified
Recommended hole diameter1.0 mm / 0.039 in plated through-hole
ManufacturerNone specified
Manufacturer part numberNone specified
This component only defines the PCB footprint/pad, not a real connector body or pin. The pad is circular, with about 1.7 mm / 0.067 in copper diameter.
Find real header
Compare header options
Check hole fit
Create real component
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Terminal Type
P1
1
Unspecified
passive

Pin Header 01x01 2.54mm Vertical - Circular Pad