PCB Design for Slider Potentiometer

flux

This is what the Flux documentation says about this topic:
“Export Not Available
Issue: An export option is grayed out or disabled.
Solutions:
  • Manufacturing/Gerber exports: Ensure you have an active PCB layout
  • Pick & Place: Verify components are placed on the PCB
  • BOM: Check that components have valid data assigned
  • 3D Models (STL/COLLADA): Switch to 3D visualization mode first” Source
Which export are you trying to run right now? If it’s Manufacturing/Gerbers, confirm you’re in a PCB layout and not just viewing a standalone 3D model.

fakegrape

I can't click the Gerber export

flux

This is what the Flux documentation says about the topic:
“Troubleshooting
Export Not Available
Issue: An export option is grayed out or disabled.
Solutions:
  • Manufacturing/Gerber exports: Ensure you have an active PCB layout
  • Pick & Place: Verify components are placed on the PCB
  • BOM: Check that components have valid data assigned
  • 3D Models (STL/COLLADA): Switch to 3D visualization mode first”
Source
If you confirm you have an active PCB layout open, the Manufacturing Files (Gerbers) export should become available. If it’s still disabled, tell me which of the above conditions might not be met and I’ll help you resolve it.
Confirm PCB tab
Ask about “active layout”
Check board outline requirement
Clarify export menu path
Describe project state
Sign up to send
PAD_W_L
PAD_B_R
W
Hole6
MH2
6
PAD_B
Hole3
PAD_W_R
A
1
Hole5
8
PAD_W
5
4
7
B
PAD_A
PAD_B_L
MH1
B
Hole2
W
3
A
Hole1
Hole4
PAD_A_L
PAD_A_R
2

RS60N1219A04

RS60N1219A04 thumbnail
ALPS RS60N1219A04 Slider Potentiometer Breakout & Mounting Adapter PCB

Properties

0

Consumer Electronics

5

mm

Alps Alpine

5

{"drillDiameter_mm":2.0,"holes":[{"x":-25.85,"y":0.0},{"x":25.85,"y":0.0}]}

ALPSALPINE(阿尔卑斯阿尔派)

3

mm

88

mm

51.7

Potentiometer

51.7

RS60N1219A04 slider potentiometer PCB adapter board providing mechanical and electrical breakout for A, W, B terminals and mounting holes

16

mm

Isolation

1.5

mm

alldatasheet.com/datasheet-pdf/pdf/866387/ALPS/RS60N1219A04.html

0

1.88

11.25

51.7

Variable Resistor

Match A/W/B through-hole pad drill sizes and annular rings for all corresponding terminals and breakout pads on the adapter PCB (A, W, B, PAD_A, PAD_W, PAD_B, and their left-side duplicates). Ensure identical drill diameter and copper annulus so all terminal pairs are mechanically interchangeable.

0

Diagram



  
    
  
  
    
  












"Potentiometer"
"Adapter PCB"
"A Pad (Terminal)"
"W Pad (Terminal)"
"B Pad (Terminal)"
"Mounting Holes"

3.75

2.54

mm

5

mm

51.7

PCB

RS60N1219A04

C470519

RES-ADJ-TH_L88.0-W16.0_RS60N1219A04

Variable Resistors/Potentiometers

Pricing & Availability

See prices from popular manufacturers for your project.

Controls