Power net portal is a special schematic object used to define a power or ground net. Power ports allow you to conveniently indicate a power net at any location in the design. Power nets of the same designator automatically connect throughout your design #portal #power
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
The MAX3051EKA+T is a CAN (Controller Area Network) transceiver. CAN transceivers are used in automotive and industrial applications to interface between a CAN controller and the physical CAN bus. They convert the digital signals from the CAN controller into differential signals on the CAN bus and vice versa.
Here are some key functions and features of the MAX3051:
Transceiver for CAN Networks: It allows communication over a CAN bus, which is widely used for robust communication in vehicles and industrial equipment.
Differential Signaling: The transceiver uses differential signaling on the CANH (high) and CANL (low) pins to reduce noise and improve signal integrity.
Standby and Shutdown Modes: The SHDN pin can be used to put the device into standby or shutdown mode to save power.
Adjustable Speed: The RS pin allows setting the transceiver speed, which can help balance between speed and EMI (electromagnetic interference) sensitivity.
Protection Features: Typical CAN transceivers have protection against faults such as bus lines shorted to ground or battery, overvoltage and others.
In your project, these designator pins correspond to various functions: