Part Information Audit and Review

flux

Fixed the BQ24074RGTT terminal metadata from the TI datasheet.
Updated all 17 terminals with datasheet-derived Pin Type and Pin Description, including standard pin types for IN, OUT, BAT, VSS, EP, open-drain status outputs, and programming/control pins. Verification passed, and the terminal-related part review checks returned no reported issues.
adrian95

adrian95

Please also convert the symbol to parametric style,and place each pin into the correct section based on the datasheet.

flux

I’ll switch the symbol metadata to parametric style, assign each terminal to datasheet-based functional sections, and verify the resulting symbol properties.

flux

Updated the symbol metadata to Parametric style.
I assigned each pin to a datasheet-based section and orientation: power-path pins to Power, VSS/EP to Ground, TS to Analog, and control/programming/status pins to Control. I also set terminal order by datasheet pin number and verified the updates; terminal/parametric review checks returned no reported issues.
Run ERC review
Audit pin sections
Check layout guidance
Add support parts
Sign up to send
BAT
~{CHG}
~{CE}
OUT
EN1
VSS
ILIM
ITERM
BAT
~{PGOOD}
EN2
EP
OUT
TS
ISET
IN
TMR
 

BQ24074RGTT

BQ24074RGTT thumbnail
Stand-alone single-cell linear battery charger with power path
BQ24074RGTT is a highly integrated standalone linear charger and power-path management IC from Texas Instruments designed for single-cell Li-Ion/Li-Polymer battery-powered portable devices. It supports charging directly from USB ports or external adapters while simultaneously powering the system load through integrated Dynamic Power Path Management (DPPM). The device is commonly used in portable electronics, IoT devices, wireless accessories, handheld medical devices, and battery-powered embedded systems.
Key Features Single-cell Li-Ion/Li-Polymer battery charger Up to 1.5 A programmable charge current Integrated Dynamic Power Path Management (DPPM) USB-compliant charging support Selectable 100 mA / 500 mA USB current limits Programmable input current limit up to 1.5 A Supports both USB input and wall adapters Input overvoltage protection up to 28 V absolute maximum Integrated thermal regulation and thermal shutdown Reverse-current and short-circuit protection Programmable pre-charge and fast-charge safety timers Battery temperature monitoring via NTC thermistor input Charge status outputs for charging/done indication Current monitoring output (ISET) Compact 16-pin VQFN (3×3 mm) package Wide operating temperature range suitable for industrial applications Typical Applications TWS charging cases and earbuds Portable medical devices IoT and asset tracking systems Handheld gaming accessories Video doorbells and IP cameras Portable embedded systems and development boards Important Design Notes Designed specifically for 1-cell battery applications Requires proper thermal PCB layout due to linear charging architecture DPPM allows the system to operate even with a deeply discharged or missing battery Recommended for compact designs needing integrated charging and system power-path control
#CommonPartsLibrary #IntegratedCircuit #PowerManagement

Properties

VQFN-16 RGT (3 mm × 3 mm) with exposed thermal pad

Standalone single-cell Li-Ion/Li-Polymer linear charger and power-path management IC; 4.2 V battery regulation, 4.4 V OUT regulation, 10.5 V OVP, 1.5 A programmable fast charge/input current limit.

IN operating range 4.35–10.2 V for BQ24074; IN withstand/recommended range up to 26 V, abs max 28 V

-40 to 85

°C

Texas Instruments

U

BQ24074RGTT

C2861252

VQFN-16_L3.0-W3.0-P0.50-TL-EP1.7

Battery Management ICs

Extended Part

ti.com/lit/ds/symlink/bq24074.pdf

creativecommons.org/licenses/by/4.0/

parametric-v1

Pricing & Availability

See prices from popular manufacturers for your project.

Controls