Schematic for ProtoPrincipal d22f: Learn how to use Copilot, your...

Conexiones a Tierra en Circuitos

Hola, no entiendo una cosa, cómo funciona el elemento ground, mi pregunta es porque ya hice las conexiones de todo mi circuito, de las alimentaciones a 5 y 3.3v, de los pines di comunicación, pero el programa no me dice nada de las tierras, no me muestra que las tenga que conectar, porque?

329 days

flux

0:20

General (prev)

Project

En Flux las conexiones a tierra se gestionan de forma “implícita” mediante componentes de tipo Ground y los net portals asignados a tierra (por lo general etiquetados como GND). Esto significa que cuando conectas los pines de tierra de tus componentes a un net portal o a un componente Ground, Flux entiende que forman parte de la misma red de tierra. No se muestran mensajes adicionales porque, una vez que usas el componente o net portal adecuado, las conexiones están correctamente definidas.

329 days

usv

bueno, entonces, ya hice todas mis conexiones, ya tienen todos mis puertos de tierra el componente Ground, no me pidió ya los interconectara, ya están interconectados entonces?

329 days

flux

0:24

General (prev)

Chat History

Project

+3.3V

TempAmbiente_D4

Así es, en Flux si todos los pines de tierra están conectados a un componente Ground o a un net portal designado para tierra (por lo general etiquetado como GND o similar), la interconexión se entiende de forma implícita. No es necesario realizar conexiones adicionales manualmente para la red de tierra.

Review schematic nets

Check net assignments

Proceed to PCB layout

329 days

Ready.

PWM_BrLss_1

+5V

RX_GPS

CNS_D12

Resistance

220 Ω

TX2

Motor Izquierdo

+3.3v

RX2

+5V

TX2

GND

Carrete

Tx_SD2

ConductH2O-p2

+5V

Sensor ultrasónico

entradas tds

Tx_SD2

CNS_D12

ConductH2O-p1-LMV341

+3.3V

Carrete

Sensores de Carrete

MISO_D36

+5V

ConductH2O_D35

R ESP32

MOSI_D23

PWM_BrLss_1

+5V

TempAmbiente_D4

+3.3V

CS-cam_D27

SCL_giroscopio_D22

pH-H2O_D34

SCK_D39

RX2

DHT11 externo

PWM_BrLss_2

SCK-cam_D26

Rx_SD2

pH-H2O_D34

TX_GPS_D25

TX/RX

+5V

SDA_giroscopio_D21

PWM_BrLss_2

MOSI-cam_D32

Rx_SD2

Resistance

10k Ω

GPS Neo 7M

MOSI_D23

ConductH2O-p1-LMV341

SCK_D39

Capacitance

1u F

HS_DATA0_D2

SCL_giroscopio_D22

Resistance

10k Ω

HS_DATA0_D2

Capacitance

4700u F

+3.3v

MISO-cam_D33

Carrete

L ESP32

+3.3v

+3.3V

Echo1_D14

GND

Echo1_D14

5/3.3V

salidas tds

TX0

Trigger1_D13

ConductH2O_D35

SDA_giroscopio_D21

TX0

+3.3V

+5V

TempH2O_D15

Trigger1_D13

TX_GPS_D25

RX0

MISO_D36

Motor Derecho

+5V

TempAmbiente_D4

Antena WIFI/Bluetooth

+5V

RX0

ConductH2O-p2

Giroscópio

Reviews

Electrical Rule Checks

Duplicate Designators

Reports components with identical designators.

No-Connect Violation

Reports no-connect pins that are connected.

Missing Power

Reports power input pins that are not connected to a power source.

Single Pin Nets

Reports nets that have only one pin connected.

Missing Designator • 4

	Component
	M2 Mounting Hole
	M2 Mounting Hole
	M2 Mounting Hole
	M2 Mounting Hole

Design Rule Checks

Overlapping Copper • 1

	Des	Net	Des	Net	...
	Trace 4719	Net 51	Trace 7c27	Net 4

Invalid Layer

Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.

Component Overrides • 35

	Designator	Ruleset
	C2:A	Override rule for A
	C2:K	Override rule for K
	D1:anode	Override rule for anode
	D1:cathode	Override rule for cathode
	D2:anode	Override rule for anode
	D2:cathode	Override rule for cathode
	Fab Shapes	Override rules for Fab Shapes
	Fab Shapes	Override rule for Fab Shapes
	R1:P1	Override rule for P1
	R1:P2	Override rule for P2
	R3:P1	Override rule for P1
	R3:P2	Override rule for P2
	Via	Override rule for Via
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rules for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rules for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀REF｀＊	Override rules for ＊｀REF｀＊
	＊｀REF｀＊	Override rule for ＊｀REF｀＊
	＊｀VALUE｀＊	Override rule for ＊｀VALUE｀＊
	＊｀VALUE｀＊	Override rules for ＊｀VALUE｀＊
	4700uF	Override rule for 4700uF
	K	Override rule for K
	K	Override rule for K
	Silk Shapes	Override rule for Silk Shapes
	Silk Shapes	Override rule for Silk Shapes

Airwires

Reports missing routed traces between pads in a net.

Layers with Multiple Fills

Reports layers that have multiple copper fills of different nets. Make sure the Connected Layers rule value of nets with fills is valid.

Floating Copper • 4

	Name
	Trace b646
	Trace 4ea3
	Trace 4f10, Trace eb56, Trace 86d4, Trace 894a
	Trace 54a1, Trace e7aa, Trace f5ad

Protected Intrusions

Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.

Missing Footprints

Reports components that need a footprint but don't have one.

Manufacturing

Manufacturer Part Number • 18

	Designator	MPN
	M2 Mounting Hole	None
	M2 Mounting Hole	None
	M2 Mounting Hole	None
	M2 Mounting Hole	None
	5/3.3V	None
	Antena WIFI/Bluetooth	None
	C1	None
	Carrete	None
	F1	None
	F2	None
	L ESP32	None
	Motor Derecho	None
	Motor Izquierdo	None
	R1	None
	R3	None
	R4	None
	R ESP32	None
	TX/RX	None

Parts Available

Beta

Checks that all components are available from distributors.

System Checks

Auto-Layout

Beta

Reports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.

Passive Components

Resistor Power Rating

Beta

Checks that the power traveling across a given resistor is under its rating with 50% headroom.

Learn more

Pull Up/Pull Down Presence

Beta

Checks that IC pins that require pull up or pull down resistors have them.

Learn more

Capacitor Voltage Rating

Beta

Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.1k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Inspect

ProtoPrincipal d22f

Controls

Properties

Manufacturer Part Number

Datasheet URL

Designator Prefix

Availability & Pricing

No results found.

Assets

Thumbnail

Brainstorm w Copilot.png

id=Brainstorm w Copilot

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.