Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project

Write a project description

Find schematic issues

Create a test plan

Simulate a circuit

Prepare for Manufacturing

Component Selection Workflow

New Subsystem Wizard

Write I2C initialization code

Generate firmware skeleton

list all ICs and the decoupling capacitors attached to each. Ensure to include a...

kerry

@copilot list all ICs and the decoupling capacitors attached to each. Ensure to include all ICs present in the design, including digital ICs, power converters, LDOs, etc. For every IC, clearly state:

What power net the decoupling capacitors are attached to. What is the stated voltage of that net.
The voltage rating and value of the attached decoupling capacitors.
Signal with the expression “[WARNING]” if any of the following conditions are met: no decoupling capacitors are attached; the voltage of the power net is higher than the voltage rating of the capacitor; No voltage range was stated for the capacitor. Give a separate “[WARNING]” for each condition. Signal with the expression “[OK]” if none of those conditions are met
Express the result in a markdown-formatted table

copilot

Here is a summary of the ICs and their associated decoupling capacitors, the power net that the decoupling capacitors are attached to, and whether each IC meets the stated criteria.

Table

IC Designator	Decoupling Capacitor(s)	Power Net & Voltage	Capacitor Voltage Rating & Value	Comments
U2 (CN3063)	On Power Net: VBAT, Capacitor: C5	VBAT, Voltage not stated	10μF, Voltage rating not stated	[WARNING]: No voltage range stated for capacitor. No Voltage of given Power Net
U6 (102010428)	On Power Net: +3V3, Capacitor: C11	+3V3, Voltage not stated	4.7μF, Voltage rating not stated	[WARNING]: No voltage range stated for capacitor. No Voltage of given Power Net
IC1 (MT3608L)	On Power Net: VBAT, Capacitor: C3, C7	VBAT, Voltage not stated	100nF, Voltage rating not stated; 22μF, Voltage rating not stated	[WARNING]: No voltage range stated for capacitor. No Voltage of given Power Net
U1 (RT8059GJ5)	On Power Net: VBAT, Capacitor: C4	VBAT, Voltage not stated	4.7μF, Voltage rating not stated	[WARNING]: No voltage range stated for capacitor. No Voltage of given Power Net
U4 (317990687)	On Power Net: +3V3, Capacitor: C6	+3V3, Voltage not stated	10μF, Voltage rating not stated	[WARNING]: No voltage range stated for capacitor. No Voltage of given Power Net
IC2 (SP3485EN-L/TR)	No decoupling Capacitor found	No Power Net found	N/A	[WARNING]: No decoupling capacitors are attached.
U3 (SY6280AAAC)	On Power Net: +3V3, Capacitor: C12	+3V3, Voltage not stated	100nF, Voltage rating not stated	[WARNING]: No voltage range stated for capacitor. No Voltage of given Power Net

Please, note that

The voltage of Power Nets is not stated in the documentation.
The voltage rating of decoupling capacitors is not stated in this documentation.
IC2 does not have any decoupling capacitors attached.

You may want to supply these missing information if available or verify with the datasheets or your design decisions if these findings state any problems.

Someone is typing...

Check that none of the unconnected pins require pull-up or pull-down resistors t...

kerry

@copilot Check that none of the unconnected pins require pull-up or pull-down resistors to ensure proper function.

copilot

Keep in mind that I may not have real-time capabilities to check for unconnected pins in the physical schematic. However, I can provide some guidance based on the information provided in the project description.

Pull-up or pull-down resistors are typically needed for MCU IO Pins to ensure they are in a known state (High/Low) when they are configured as inputs and not being driven by an external device. In the provided schematic, i/o pins from the RP2040 module (U6) and LoRa-E5 module (U4) are relevant for this check.

Here are the guidelines for these specific components, and you can apply them to your actual board:

XIAO RP2040 Module (U6):

Pins: P26_A0_D0, P27_A1_D1, P28_A2_D2, P29_A3_D3, P6_SDA_D4, P7_SCL_D5, P0_TX_D6, D7_CSn_P1_RX, D8_SCK_P2, D9_MISO_P4, D10_MOSI_P3.
All GPIO Pins (i.e., A0 to D10) should have pull-up or pull-down resistors if they are not connected to active devices. The specific choice of pull-up or pull-down would depend on your specific application.

Seeed LoRa-E5 (U4):

Pins: PA13, PA14, PB15, PA15, PB4, PB3, PB7, PB6, PB5, PC1, PC0, RFIO, PA3, PA2, PB10, PA9, PA0, PB13, PB9, PB14, PA10, PB0.
The same as with the XIAO RP2040, GPIO pins should have proper pull-up or pull-down resistors when not actively connected.

This check should be performed in your actual schematic within the Flux.ai tool. However, these are recommendations based on typical usage, you should also refer to the specific datasheets or application notes for the XIAO RP2040 and LoRa-E5 modules for any specific requirements or recommendations they might have regarding pull-up or pull-down resistors.

Be sure to verify this information with your schematic and make the necessary adjustments.

Someone is typing...

Check that all reset/enable have an external pull-up or pull-down resistors. Rep...

kerry

@copilot Check that all reset/enable have an external pull-up or pull-down resistors. Report action items in an ordered list.

copilot

Based on the project description provided, some devices use reset or enable pins as mechanisms to control behavior, usually activating or deactivating the device. For reliable functioning of these devices, a defined default state helps to avoid unpredictable behavior, which is usually ensured by using external pull-up or pull-down resistors.

Here are the devices on this project with corresponding reset or enable pins:

IC1 (EN) - This appears to be directly connected to a voltage source, but it doesn't have an explicit pull-up or pull-down resistor.
U1 (EN) - This also appears to be directly connected to a voltage source, but it doesn't have an explicit pull-up or pull-down resistor.
U1 (FB) - This doesn't seem to have an explicit pull-up or pull-down resistor. The Feedback pin shouldn't require a pull-up since it's tied to a voltage divider network.
U2 (FB) - This doesn't seem to have an explicit pull-up or pull-down resistor. The Feedback pin shouldn't require a pull-up since it's tied to a voltage divider network.
U2 (~DONE) - No explicit pull-up or pull-down resistor is mentioned.
U2 (~CHARG) - No explicit pull-up or pull-down resistor is mentioned.
U4 (RST) - No explicit pull-up or pull-down resistor is mentioned. It is connected to Net NRST(P1) which does not show an associated pull-up or pull-down resistor connection.
IC2 (DE and RE) - These are connected to the same net (ENABLE) and they do not have explicit pull-up or pull-down resistors.

Based on this information, we need to define explicit default state to avoid floating values and maintain a predictable behavior for the devices listed. Here are the action items in an ordered list:

For IC1 (EN) pin, add an external pull-up or pull-down resistor as it doesn't currently have an explicit one.
For U1 (EN) pin, add an external pull-up or pull-down resistor as it doesn't currently have an explicit one.
For U2 (~DONE) pin, add an external pull-up or pull-down resistor.
For U2 (~CHARG) pin, add an external pull-up or pull-down resistor.
For U4 (RST), add an external pull-up or pull-down resistor.
For IC2 (DE and RE) pins, add external pull-up or pull-down resistors.

Please provide additional comments or corrections, if needed.

Someone is typing...

+3V3

C12

Capacitance

100nF

+3V3

VUSB

PIO2

SCL

+3V3

NRST

SDA

PIO1

ENABLE

12_5V

R15

Resistance

4k7 Ω

R16

Resistance

4k7 Ω

R11

Resistance

22 Ω

R14

Resistance

120 Ω

SW2

R17

Resistance

4k7 Ω

R13

Resistance

470 Ω

R18

Resistance

22 Ω

IC2

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.8k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Project Name

Description

The "Green Dot 2040E5" Board is a Node that interfaces RS485 Sensor probes and can log information to the cloud using LoRa Connectivity. It uses the XIAO RP2040 and the LoRa-E5 (STM32WLE5JC) modules from Seeed Studio to do its magic. It also has amazing power management capabilities (Solar charging, Battery protection, etc) that make it very useful for IoT applications #Seeed #XIOA #LoRa #RP2040 #IoT

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor	Qty 1
Digi-Key	$16.65–$19.05
LCSC	$2.04–$3.77
Mouser	$21.31–$22.00

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

Schematic

Introducing AI Placement!