Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain this part

Write a part description

Describe each pin

Operating conditions

Electrical max ratings

Part Specifications

Application circuits

Verify Part Details

Recommend similar parts

Check availability & lifecycle

recommend a replacement for R1.

anthony21

@copilot recommend a replacement for R1.

copilot

For replacing R1 which is a 47kΩ, 0.125W $1/8$W, 0805 package resistor with ±5% tolerance and compliant with AEC-Q200 automotive standards, it's important to find a resistor that matches these key characteristics closely. Since you're using a resistor from Stackpole Electronics Inc., I'll assume that quality and automotive compliance are priorities for you.

A suitable replacement can come from other reputable manufacturers known for their precision components and reliability in automotive applications. Here are some guidelines to follow when searching for a replacement:

Resistance Value: 47kΩ.
Power Rating: 0.125W or $1/8$W. It's okay to choose a resistor with a higher power rating, but not lower.
Tolerance: ±5% or better (tighter tolerance is typically an improvement).
Package: 0805 (2012 Metric). This should match because it ensures compatibility with your PCB layout.
Automotive Grade: Look for AEC-Q200 compliance, important for automotive applications.
Manufacturer Suggestions: Companies like Vishay, Yageo, and Panasonic are well-regarded in the industry and offer components that often meet or exceed the specifications of parts like your original Stackpole resistor.

Example replacement specification could be:

Vishay CRCW080547K0FKEA
- Resistance: 47kΩ
- Power Rating: $1/8$W ($0.125$W)
- Tolerance: ±1%
- Package: 0805
- AEC-Q200 Qualified

Make sure to verify the detailed specifications from the datasheet of the replacement resistor and ensure it fits your application's specific requirements. The tighter tolerance example I've suggested may provide a slight performance improvement in your circuit, depending on its sensitivity to resistance value.

explain this project.

zhijie

@copilot explain this project.

copilot

The project is currently at its initial stage with three components: two pins and one resistor.

Here is a brief description of each component:

P2: A single pin component with unspecified type. It has been assigned the designator 'P2' but no other information is provided.
P1: Another single pin component with unspecified type, and designator 'P1'. Again, no other information is provided.
R1: This is a chip resistor with the following specifications:
- Part number: RMCF0805JT47K0
- Resistance: 47k (47,000 Ohms)
- Maximum power dissipation: 0.125W (1/8W)
- Size/Package: 0805 (2012 Metric)
- Type: Thick Film
- Application: Automotive AEC-Q200
- Manufacturer: Stackpole Electronics Inc

No electrical connections have been made in this project yet, so it's hard to understand the intended functionality of the circuit at this stage. However, the comment #forLedBlink suggests the circuit may be intended for an LED blinking application.

kevinkevin

copilot

If we're going to create a simple LED blinking circuit using the described components (P2, P1, and R1) and assuming the intent from your comment "#forLedBlink," we'd also need an LED and possibly a control method like a microcontroller or a simpler oscillating circuit element if it's meant to blink autonomously. However, only a resistor is mentioned in your project description, which could act as a current-limiting resistor for the LED to protect it from receiving too much current.

Given the available information and assuming we're aiming for a simple, possibly MCU-controlled LED blinker circuit, here's a basic plan:

Assumptions

You will use an MCU (not described in the project) to control the blinking of an LED.
The P1 and P2 pin components are for power supply connections or possibly for the LED and resistor pins, but more likely they are placeholders for connection points to other parts of the circuit or power supply.
The LED is directly driven by an MCU GPIO (General-Purpose Input/Output) pin, and requires a current limiting resistor to protect it.

Additional Required Component

LED (Let’s call it D1 for the designator): You'll need to choose an LED. The forward voltage and current will dictate how we use the 47k resistor (R1).

Basic Circuit Proposal

MCU GPIO Pin to LED: You connect an MCU GPIO pin to the anode (positive longer lead) of the LED (D1). This GPIO pin controls the on/off state of the LED to achieve blinking.
LED to Resistor Connection: To prevent the LED from drawing too much current, which could damage it or the MCU, you connect the cathode (negative shorter lead) of the LED (D1) to one end of the resistor (R1:P1 or R1:2, depending on the pinout description and consistency).
Resistor to Ground: Finally, the other end of the resistor (R1:P2 or R1:1, depending on the pinout description and consistency) is connected to the ground (GND).

Important Note:

The value of 47k Ohms for the current-limiting resistor (R1) is unusually high for most LED applications, which typically use resistors in the range of 220 ohms to 1k ohms. This high value would result in a very dim LED or possibly no visible illumination, depending on the LED's characteristics. This design assumes that the 47k Ohm value is a requirement or constraint you've provided. If not, you might want to consider a lower-value resistor for brighter illumination.

Connections Summary:

Connect MCU GPIO pin to D1:Anode
Connect D1:Cathode to R1:P1 (or R1:2)
Connect R1:P2 (or R1:1) to GND

This is a simplified overview based on assumptions. Please adjust the design according to your specific requirements, including adjusting the resistor value if a brighter LED is desired and adding any missing components such as the MCU and LED themselves.

Cambiar la resistencia a 4.7 K 1/4 W

anthony21

@copilot Cambiar la resistencia a 4.7 K 1/4 W

copilot

Para cambiar la resistencia de 47kΩ, 1/8W por una de 4.7kΩ, 1/4W en tu proyecto, primero necesitaríamos encontrar una resistencia que cumpla con estas nuevas especificaciones. Por el contexto de la pregunta, entiendo que buscas realizar un cambio en las propiedades del componente dentro de tu diseño en Flux. Dado que no tengo acceso a una base de datos de componentes en tiempo real para darte un número de parte específico (MPN) de reemplazo, te sugeriré los pasos generales para hacer este cambio asumiendo que tienes o puedes encontrar una resistencia adecuada con estas características.

Ubica el componente R1 en tu diseño dentro de Flux, que actualmente es una resistencia de 47kΩ, 1/8W, con el número de parte (MPN) RMCF0805JT47K0 de Stackpole Electronics Inc.
Selecciona el componente R1 para abrir las propiedades del componente o para acceder a una opción que te permita editar las propiedades.
Actualiza las especificaciones del componente a 4.7kΩ, 1/4W. Esto incluirá cambiar:
- La resistencia de "47k" a "4.7k".
- La potencia de "1/8W" a "1/4W". Ya que estás cambiando la resistencia a un valor menor y aumentando su capacidad de potencia, ajusta las propiedades del componente en el editor o documenta el nuevo valor deseado.
Reemplaza el número de parte (si tienes uno specifico) para reflejar el cambio a una resistencia de 4.7kΩ, 1/4W. Esto es crucial si planeas generar una lista de materiales (BOM) precisa para fabricación o adquisición de componentes.
Ajusta las conexiones si es necesario. Aunque este cambio no afecta directamente a las conexiones eléctricas (ya que solo has modificado las propiedades del componente), siempre es una buena práctica revisar el diseño para asegurarse de que todo sigue siendo válido con el nuevo componente.

Si necesitas ayuda para encontrar un componente específico o para aplicar técnicamente estos cambios en Flux, estaré encantado de ayudarte con más detalles.

Check that none of the unconnected pins require pull-up or pull-down resistors t...

jessicaliu

@copilot Check that none of the unconnected pins require pull-up or pull-down resistors to ensure proper function.

1 k

skyfall7080

que significa

1548youju

cambiar por una de 78abd6f8-aec4-1d24-8732-d7689d3e61e8

jameshuggins

1 k

recommend a replacement for R1.

josue-gallegos-2001

@copilot recommend a replacement for R1.

copilot

For the resistor

R1

with the specifications given:

Resistance: 47 kOhms
Tolerance: ±5%
Power Rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Type: Automotive AEC-Q200 Thick Film

Here are a few general replacement suggestions that you can look for:

Yageo RC0805JR-0747KL
- Resistance: 47 kOhms
- Tolerance: ±5%
- Power Rating: 0.125W
- Package: 0805
Vishay CRCW080547K0JNEA
- Resistance: 47 kOhms
- Tolerance: ±5%
- Power Rating: 0.125W
- Package: 0805
KOA Speer RK73B1JTTD4703F
- Resistance: 47 kOhms
- Tolerance: ±1% (better precision)
- Power Rating: 0.125W
- Package: 0805

Make sure to verify the footprint, tolerance, temperature coefficient, and other parameters specific to your application requirements before finalizing any replacement. Let me know if you need further assistance!

sabes lo que he puesto ? En el esquema

julio1984

@copilot sabes lo que he puesto ? En el esquema

copilot

Sí, en tu esquema has incluido los siguientes componentes:

$R1$ , un resistor de Stackpole Electronics Inc:
- Número de parte del fabricante: RMCF0805JT47K0
- Resistencia: 47 kOhms ±5% 0.125 W, 1/8 W
- Tamaño: 0805 (2012 métrico)
- Tipo de película: Película gruesa
- Estándar automotriz: AEC-Q200
$P1$ y $P2$ : dos conectores con un pin cada uno cuyo propósito no se ha especificado completamente.

Hasta el momento no has realizado conexiones eléctricas en el proyecto. ¿Cómo te gustaría proceder?

conecta 3 resistencias de 220 ohmios en serie

marcosalejandro

@copilot conecta 3 resistencias de 220 ohmios en serie

copilot

Para conectar tres resistencias de 220 ohmios en serie, sigue estos pasos:

Añade las tres resistencias a tu proyecto en Flux.
Conecta los pines de las resistencias en serie.

Suponiendo que los designators de las resistencias son $R2$, $R3$ y $R4$, las conexiones serían:

Conecta $R2$:P2 a $R3$:P1.
Conecta $R3$:P2 a $R4$:P1.

Entonces los extremos libres serían $R2$:P1 y $R4$:P2.

Aquí están las conexiones:

Conecta $R2$:P2 a $R3$:P1.
Conecta $R3$:P2 a $R4$:P1.

¿Cuál es tu preferencia para los designators de las resistencias? Si prefieres $R1$ podemos renumerarlo.

recommend a replacement for R1.

1548youju

@copilot recommend a replacement for R1.

copilot

Sure, since the requirements and properties specified for R1 are a 47kOhm, 1/8W Chip Resistor in the 0805 size package, made with Thick Film, specifically for automotive use based on AEC-Q200 standard, you might replace it with a resistor that matches these parameters and is commonly used in the industry.

For example, a good replacement could be:

Yageo's RC0805JR-0747KL: This is also a 47kOhm, 1/8W, 0805 package size resistor with ±5% tolerance. Yageo is a well-known and reliable manufacturer of resistors.

Please keep in mind to respect the footprint size of 0805 and the power rating of 1/8 Watt when choosing a replacement.

I would recommend that you verify per their datasheets and your specific application requirements before replacing any component.

Note: The exact replacement part may vary based on availability or specific design requirements such as high temperature, precision, noise, etc. Always refer to the manufacturer's datasheet and guidelines when selecting components.

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.8k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M