Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project
Write a project description
Find schematic issues
Create a test plan
Simulate a circuit
Prepare for Manufacturing
Component Selection Workflow
New Subsystem Wizard

Ready.

Sign up to send
give me connetcion details for a 60 sec stopwatch made using multiplexer and dem...
harshal05

harshal05

@copilot give me connetcion details for a 60 sec stopwatch made using multiplexer and demultiplexer ic
1y

copilot

Designing a 60-second stopwatch using multiplexers and demultiplexers (mux/demux ICs) involves using these components to control the display and timing logic. I’ll assume you want to use a digital display and a simple binary counter as the timing mechanism. Commonly, a 7-segment digital display is used to show the stopwatch timing. The design will be simplified for explanation purposes.
Basic Components Required:
  1. Binary Counter IC (e.g., 74HC4060) - This will serve as the timekeeping element, incrementing every second.
  2. BCD to 7-Segment Decoder IC (e.g., 74LS47) - To decode the binary output of the counter to a format suitable for driving a 7-segment display.
  3. Multiplexer IC (e.g., 74HC153) - For selecting between different inputs (in this case, different digits to be displayed on the 7-segment display).
  4. Demultiplexer IC (e.g., 74HC138) - To control which 7-segment display is active at any given time if you're using more than one (e.g., for a two-digit display).
  5. Common Anode 7-Segment Displays - For displaying seconds.
  6. Crystal Oscillator - For providing a stable clock signal to the binary counter.
Simplified Connection Details:
  1. Clock Generation:
    • Use a Crystal Oscillator to generate a precise 1Hz clock signal. Connect its output to the clock input of the Binary Counter IC.
  2. Timekeeping and Display:
    • The Binary Counter IC counts from 0 to 59 (to represent seconds).
    • The counter's binary output is connected to the Multiplexer IC's input pins.
  3. Display Control:
    • The Multiplexer IC selects which part of the binary counter's output is directed to the BCD to 7-Segment Decoder at any given time. This selection is typically controlled by a separate logic circuit or microcontroller, based on timing requirements.
    • The BCD to 7-Segment Decoder decodes the binary signal to control the segments of the 7-segment display.
    • If your design requires displaying more than one digit simultaneously, use a Demultiplexer IC to control which 7-segment display is active at any moment.
Example Connections:
  • Clock Generation to Counter:
    • Connect the Crystal Oscillator output to Binary Counter IC (e.g., 74HC4060) clock input.
  • Counter to Multiplexer:
    • Connect Binary Counter IC outputs to Multiplexer IC inputs (e.g., 74HC153: A, B, C, D).
  • Multiplexer to Decoder:
    • Connect Multiplexer IC output to BCD to 7-Segment Decoder IC (e.g., 74LS47: A, B, C, D) inputs.
  • Decoder to Display:
    • Connect BCD to 7-Segment Decoder IC outputs to Common Anode 7-Segment Display inputs, ensuring to match segment control lines correctly.
  • Using Demultiplexer for Multiple Displays:
    • If you have multiple digits, control which 7-segment display is active using a Demultiplexer IC (e.g., 74HC138).
Note: This description simplifies many details for brevity. The exact connections (especially for the multiplexers/demultiplexers) depend heavily on the specifics of your circuit and components, such as the number of digits in your display. Adjust the IC choices based on your requirements (e.g., number of outputs, power levels).
Please specify if you have particular ICs in mind or require more detailed circuit analysis, including timing logic and specific IC pinouts.
1y
harshal05

harshal05

give connection details with pin numbers and also use two seven segment display one for time in sec(tens) and one for time in sec(units)
1y

copilot

To create a 60-second stopwatch with detailed pin connections using two 7-segment displays (one for tens of seconds and one for units of seconds), let's refine our design with specific ICs and a more detailed approach. For this purpose, I'll assume we're using the following ICs:
  • Binary Counter IC: 74HC4060 (14-stage ripple carry binary counter)
  • BCD to 7-Segment Decoder ICs: CD74HC4511 (BCD to 7-segment latch/decoder/driver for liquid crystal and LED displays; two of these for each digit)
  • Multiplexer/Demultiplexer ICs: Not needed for this simplified version. Instead, we directly connect the counter to the decoders and manage two displays.
  • Two Common Cathode 7-Segment Displays: For displaying the seconds in tens and units, respectively.
  • Clock Source: We'll use an external 1Hz clock signal for simplicity, generated by a crystal oscillator circuit designed for a 1Hz output.
Connection Outline: Clock Source to Binary Counter:
  • Connect your 1Hz Clock Source to 74HC4060 Pin 11 (Clock Input).
Binary Counter Outputs to BCD to 7-Segment Decoders:
  • Assuming the counter's outputs start from Q4 to Q14 (as lower outputs will not be used), and we're only concerned with a 60-second countdown requiring 6 bits.
  • For the tens of seconds display (0-5), you need to decode the output bits equivalent to 2's and 4's place since the counter counts in binary and you won't exceed '5' in the tens place for a 60-second timer.
  • For the units of seconds display (0-9), you will directly map the lower 4 bits of the counter to the decoder.
Let's connect the Binary Counter to the BCD to 7-Segment Decoder ICs:
Units of Seconds (Lower 4-bits):
  • Connect 74HC4060 Pin 1 (Q4) to CD74HC4511 (Units) Pin 7 (A).
  • Connect 74HC4060 Pin 2 (Q5) to CD74HC4511 (Units) Pin 1 (B).
  • Connect 74HC4060 Pin 3 (Q6) to CD74HC4511 (Units) Pin 2 (C).
  • Connect 74HC4060 Pin 4 (Q7) to CD74HC4511 (Units) Pin 6 (D).
Tens of Seconds (For counting 0-5, we can use two bits):
  • Connect 74HC4060 Pin 5 (Q8) to CD74HC4511 (Tens) Pin 7 (A; representing 2's).
  • Connect 74HC4060 Pin 7 (Q10) to CD74HC4511 (Tens) Pin 1 (B; representing 4's).
  • Note: Pins C and D of the tens CD74HC4511 would not be connected since we're only counting 0-5. Ensure to correctly configure the CD74HC4511 to handle the 0-5 count using only A and B inputs; this may involve setting unused inputs in a way that properly represents each digit.
BCD to 7-Segment Decoders to 7-Segment Displays:
Because connections between the CD74HC4511 and common cathode 7-segment displays depend on the segment layout, here’s a general way to connect them:
  • CD74HC4511 to 7-Segment Display (Common Cathode):
    • Connect CD74HC4511 Outputs (a-g) to 7-Segment Display Inputs (a-g) accordingly.
    • Output Pin 15 (a) on the CD74HC4511 connects to segment 'a' on the display, and so on, following the datasheet for both the decoder and the display to ensure correct segment mapping.
Remember, this explanation simplifies the actual construction and testing process. In practice:
  • You might need pull-up/pull-down resistors on certain inputs.
  • Be mindful of the power supply requirements and limits for each IC.
  • Testing each stage incrementally can help troubleshoot and ensure the circuit functions as intended.
This detailed connection strategy assumes a specific set of ICs and a common cathode display type. If you're using different ICs or have a common anode display, adjustments will be necessary.
1y
harshal05

harshal05

use simple mux demux ic and also add a button to stop the display at desired time
1y

copilot

For a design incorporating multiplexers (mux) and demultiplexers (demux) with a stop button functionality, we can simplify and adjust the previous design concept. This version uses multiplexing to control which of the two 7-segment displays is currently active and adds basic control for stopping the display using a button.
Let's choose the following ICs for our revised design:
  • Binary Counter IC: 74HC4060 for timekeeping.
  • BCD to 7-Segment Decoder ICs: Two CD74HC4511s for decoding the binary output to a format that can drive the 7-segment displays.
  • Multiplexer/Demultiplexer ICs: Use the 74HC157 (quad 2-input multiplexer) for selecting which digit to update and the 74HC138 (3-to-8 line demultiplexer) to control which 7-segment display is active.
  • Two Common Cathode 7-Segment Displays: For displaying the tens and units of seconds.
  • Binary to Decimal Decoder: For simplifying the design, incorporate in the use of the CD74HC4511 which already decodes binary to the values to drive a 7-segment.
  • Manual Control: A Normally Open (NO) push-button switch to stop the display.
Connection Overview with the Addition of Mux/Demux and a Stop Button: Clock and Counter:
  • Clock Source to Binary Counter: Connect your 1Hz clock source to the 74HC4060 clock input (Pin 11).
  • The outputs from the binary counter (Q outputs) encode the time in seconds.
Counter to BCD Decoders:
  • You'll map the counter's relevant Q outputs to the inputs of two CD74HC4511 decoder ICs, assuming a direct connection because the display control will mainly occur at the segment level and display selection.
Using Mux/Demux for Display Control:
  • 74HC138 (Demux) to Display Selection: Use this to select which 7-segment display is active. For simplicity, assume we're driving the common cathode pin(s) of the display or controlling transistors that power each display.
    • Demux Inputs (A, B, C): Connect to a control logic (from a microcontroller or a separate counter) that toggles the active display.
    • Demux Outputs: Connected to the display enable or common cathode of the 7-segment displays.
  • 74HC157 (Mux) for Digit Control: Use this to select the digit being updated from the counter, although in a simplified design, the direct connection from the counter through the decoders might remain constant, and the mux could alternatively be used for other input selections or control signals.
Adding a Stop Button:
  • Manual Control: Incorporate a push-button switch to halt the counter or freeze the display.
    • Simple Method: Connect the button between the clock input of the 74HC4060 and ground. Pressing it would "freeze" the clock by pulling the line low, assuming the clock line is pulled high through a resistor. This configuration necessitates a normally high clock line.
    • More Refined Control: If the clock signal cannot be directly interrupted, use the button to signal a control logic circuit or microcontroller to stop sending update signals to the displays or inhibit the counter increment signal temporarily.
Detailed Connections for Display Control:
For this scenario, specific connections (especially to the mux/demux ICs) are largely conceptual, as the exact implementation could vary based on additional components (like microcontrollers) and specific design choices, like whether the display control logic cycles rapidly to appear steady to the human eye or uses a more complex selection mechanism.
Remember, the particulars of how the 74HC138 and 74HC157 are integrated depend heavily on the surrounding circuitry and design objective. The simplified explanation provided here aims to illustrate a broad concept, assuming the user will adapt it to their precise requirements.
1y
harshal05

harshal05

Design a circuit for a 60-second stopwatch using a multiplexer (MUX) and a demultiplexer (DEMUX) IC. Provide detailed connection instructions and specifications for the components involved use simple mux demux ic, dont use any micro controller this is going to me runed on a simulation, also use 2 seven segment display one to show time in sec(units) and one to show time in sec (tens)
1y

copilot

To design a 60-second stopwatch without a microcontroller, using only discrete ICs including a multiplexer (MUX) and a demultiplexer (DEMUX) along with two 7-segment displays for tens and units of seconds, we can organize the design as follows:
Components Needed:
  • 1Hz Clock Source: For keeping time.
  • Binary Counter IC: Like the CD4024 (7-stage ripple counter) to count seconds.
  • Multiplexer (MUX) IC: Like the CD4051 (8-channel analog multiplexer/demultiplexer) which we'll creatively use for controlling which segment is illuminated across both displays.
  • Demultiplexer (DEMUX) IC: Like the CD74HC138 (3-to-8 line decoder/demultiplexer) for selecting which of the two 7-segment displays is active.
  • Two 7-Segment Display Drivers: CD4511 BCD to 7-segment latch/decoder/drivers.
  • Two Common Cathode 7-Segment Displays: For displaying seconds.
  • Normally Open (NO) Push Button: To stop/start the stopwatch.
  • Miscellaneous: Resistors for current limiting on LED segments and debouncing the push button, capacitors for power supply stabilization.
Circuit Design: Step 1: Clock Source to Binary Counter
  • Use a 1Hz Clock Source and connect it to the CD4024 Pin 10 (Clock Input).
  • Connect VDD and VSS of CD4024 to the power supply and ground, respectively.
Step 2: Binary Counter to 7-Segment Display Drivers
  • The CD4024 will count up to 60 (in binary). We'll use two of its outputs: one for units and one for tens of seconds.
  • Connect its outputs through a simple conversion logic (using additional simple logic gates IC if necessary) to form a BCD (Binary-Coded Decimal) compatible with our CD4511 display drivers. This will simplify our design without explicitly detailing the custom logic required for BCD conversion.
Step 3: MUX/DEMUX Configuration
  • Use CD4051 as a MUX to select which segment data from the output of the CD4511 (7-segment drivers) is sent to the displays.
  • Use CD74HC138 as a DEMUX to select which of the 7-segment displays (tens or units) is active at any time.
  • The selection pins of both the CD4051 and CD74HC138 can be driven by a counter or a clock-divided signal that ensures each segment and respective display is activated in sequence to create a multiplexed display effect.
Step 4: Connecting Displays and Drivers
  • CD4511 to 7-Segment Displays: Connect the outputs of each CD4511 to the corresponding segments of each 7-segment display. Ensure you map the segment outputs (a to g) correctly to the display.
  • Data inputs of CD4511 (BCD Inputs) are connected to the converted outputs from CD4024 counter.
  • MUX (CD4051) controls which segment is lit by routing the segment control signals through its channels, effectively controlling all segments across both displays through sequential selection.
  • DEMUX (CD74HC138) selects either tens or units display based on the timing control signals, ensuring only one display is active at a moment in the sequence.
Step 5: Push Button Control
  • Integrate a NO Push Button to the reset pin of the CD4024 or another control logic to stop/start the counting. The button can be debounced using a simple RC circuit.
Detailed Connection Instructions:
Since the exact binary to BCD conversion may require custom logic depending on the chosen counter IC's output pattern, an explicit listing of all pin connections is overly complex and would be impractical without a schematic drawing tool. For simulation purposes, ensure:
  • The CD4024's binary output correctly maps to the BCD expectations of the CD4511 through logic conversion.
  • The CD4051 MUX's input channels sequentially select each segment line (a-g), while its common output is connected to both displays through the CD74HC138's active channel.
  • The CD74HC138 DEMUX receives a sequential input signal that activates each display in turn, ensuring that when one display is active to show units, the other shows tens.
  • Timing for the MUX/DEMUX operation can be derived from the same clock source as the counter but divided down to suitable frequencies for human-visible display refresh.
Note: This design is conceptual and suggests a methodology for using MUX/DEMUX ICs in a stopwatch application. Practical implementation would require fine-tuning the logic levels, timing, and possibly introducing additional logic gates depending on the specific requirements of timing and clock division. Simulation software like LTSpice or a digital circuit simulator can help experiment with and refine this design before physical implementation.
1y
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
    jharwinbarrozo
    15.5k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
    jharwinbarrozo
    1.1M
Agreed Crimson Lightcycle thumbnail
Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor

Qty 1

Assets

No assets added.

Controls