Schematic for Una fuente de voltaje regulables de positivo a...

Diseño de PCB Regulador de Voltaje

flux

0:00

Autopilot

Work completed

Project description and system architecture distilled and mermaid diagram added (steps 1.1, 1.2).
All key components added: transformer (T1), bridge diodes (D1–D4), 2200 µF bulk caps (C3–C6), 100 nF decoupling caps (C7–C10), LM317KCS (U2/U4), LM337T (U3), digital LED voltmeters (U5/U6), 220 Ω resistors, 5 kΩ potentiometers (R11/R12), reverse-polarity diodes (D13/D14), connectors (J1–J3), mounting holes.
Nets fully connected per schematic plan (step 4.2).
Generic passives assigned appropriate SMD/through-hole footprints (step 6.1).

Tasks not yet done

Board outline: calculate bounding box and set PCB size (6.4).
Ground fill and via stitching for plane (6.5).
Mounting solution and mounting holes placement (6.6–6.7).
Stackup and layer assignments (6.2–6.3).
Net classification and trace-width rules (7.1–7.2).
Component placement, grouping, and separation (8.1).
Auto-routing of nets (9.1).
ERC/DRC review, thermal/mechanical checks (10.x).
BOM enrichment and manufacturability review (11.x).

Tasks marked “can’t do”

Messaging user with the architecture diagram (1.3).
Automated ERC reviews and rating checks (5.1–5.3).
Setting stackup and layer roles (6.2–6.3).

Success criteria

PCB integrates all specified components: incomplete (layout not yet placed/routed).
Isolation zones and clearances per AC/thermal rules: incomplete.
Stable ±0–24 V regulation with heatsinks: untested (layout pending).
DRC error-free and mechanical anchors: pending.

Next recommended step Prepare the PCB outline and board shape: use the layout tool to fetch transformer footprint extents and heatsink keep-out areas, then set the board dimensions with at least 10 mm isolation margins.

10 days

Ready.

Resistance

10k Ω

Resistance

47k Ω

Capacitance

10n F

Resistance

27k Ω

Resistance

10k Ω

Capacitance

10n F

Reviews

Electrical Rule Checks

Missing Footprints

Reports parts that have no footprint.

Design Rule Checks

Overlapping Copper • 36

Des	Net	Des	Net
T1:1	AC_PRIMARY_1	C4:P2	PosReg_IN
T1:1	AC_PRIMARY_1	R10:P1	U3_R9_R10
R8:P1	AdjNeg_Mid	R5:P1	PosReg_OUT
D3:cathode	Bulk_Neg	J2:P1	PosReg_OUT
D3:cathode	Bulk_Neg	C11:P1	None
C4:P1	Bulk_Pos	C12:P2	None
J1:P2	GND	C3:P1	Bulk_Pos
J1:P2	GND	D2:cathode	Bulk_Pos
R8:P2	GND	R5:P2	AdjPos_Mid
C3:P2	PosReg_IN	U4:ADJUST	None
C3:P2	PosReg_IN	U4:OUTPUT	None
C4:P2	PosReg_IN	R10:P1	U3_R9_R10
C7:P1	PosReg_IN	C4:P1	Bulk_Pos
C10:P1	PosReg_OUT	C8:P2	GND
D1:anode	T1_SEC1	D3:cathode	Bulk_Neg
D1:anode	T1_SEC1	J2:P1	PosReg_OUT
D1:anode	T1_SEC1	C11:P1	None
D2:anode	T1_SEC1	C10:P2	GND
D2:anode	T1_SEC1	C10:P1	PosReg_OUT
D2:anode	T1_SEC1	U4:INPUT	None
D3:anode	T1_SEC2	J2:P3	PosReg_OUT
D3:anode	T1_SEC2	C12:P2	None
D3:anode	T1_SEC2	D5:cathode	None
R9:P1	U3_ADJ_TO_R9	J2:P2	GND
U3:ADJ	U3_ADJ_TO_R9	J3:PIN3	None
C11:P1	None	J2:P1	PosReg_OUT
C11:P2	None	J2:P2	GND
C12:P1	None	J2:P2	GND
C12:P2	None	J2:P3	PosReg_OUT
D5:cathode	None	J2:P3	PosReg_OUT
D10:anode	None	U3:VO	PosReg_OUT
D12:anode	None	T1:1	AC_PRIMARY_1
D12:anode	None	C4:P2	PosReg_IN
D12:anode	None	R10:P1	U3_R9_R10
J1:P3	None	C3:P2	PosReg_IN
U1:V-	None	R3:P1	Net 1

Invalid Layer

Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.

Component Overrides

Reports components that have been modified using the "!important" flag.

Airwires • 45

	Designators	Net
	T1:1, J1:P1	AC_PRIMARY_1
	T1:1, T1:1	AC_PRIMARY_1
	R7:P1, R5:P2	AdjPos_Mid
	C5:P1, D4:cathode	Bulk_Neg
	C5:P2, D3:cathode	Bulk_Neg
	C5:P2, D4:cathode	Bulk_Neg
	C6:P1, C6:P2	Bulk_Neg
	C6:P1, C9:P1	Bulk_Neg
	C9:P1, C5:P1	Bulk_Neg
	U3:VI, D3:cathode	Bulk_Neg
	C4:P1, D2:cathode	Bulk_Pos
	D1:cathode, D2:cathode	Bulk_Pos
	C7:P2, C10:P2	GND
	C7:P2, J2:P2	GND
	C7:P2, R10:P2	GND
	J1:P2, J2:P2	GND
	R8:P2, R7:P2	GND
	R10:P2, R8:P2	GND
	R12:2, J2:P2	GND
	R12:2, Via-1-2:Via-1-2	GND
	Via-1-1:Via-1-1, C9:P2	GND
	R3:P1, C1:P1	Net 1
	R3:P1, R2:P2	Net 1
	U1:+, C2:P2	Net 2
	R1:P1, R4:P2	Net 3
	U1:-, R4:P2	Net 3
	U1:OUTPUT, C1:P2	Net 4
	U1:OUTPUT, R4:P1	Net 4
	C4:P2, C7:P1	PosReg_IN
	C7:P1, C3:P2	PosReg_IN
	U2:INPUT, C3:P2	PosReg_IN
	C10:P1, R6:P1	PosReg_OUT
	J2:P3, C10:P1	PosReg_OUT
	R5:P1, R6:P1	PosReg_OUT
	U2:OUTPUT, J2:P1	PosReg_OUT
	U3:VO, J2:P1	PosReg_OUT
	U3:VO, J2:P3	PosReg_OUT
	D1:anode, D2:anode	T1_SEC1
	T1:3, D2:anode	T1_SEC1
	D3:anode, D4:anode	T1_SEC2
	T1:4, D3:anode	T1_SEC2
	R11:1, U2:ADJUST	U2_ADJ_TO_R11
	R11:2, R12:1	U2_R11_R12
	U3:ADJ, R9:P1	U3_ADJ_TO_R9
	R10:P1, R9:P2	U3_R9_R10

Deprecated Rules

Reports nodes that are using rules that are not supported anymore.

Layers with Multiple Fills

Reports layers that have multiple copper fills of different nets. Make sure the Connected Layers rule value of nets with fills is valid.

Floating Copper

Detect any via, trace or copper fill island that is not connected to any net.

Protected Intrusions

Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.

Manufacturing

Manufacturer Part Number • 26

	Designator	MPN
	C1	None
	C2	None
	C3	None
	C4	None
	C5	None
	C6	None
	C7	None
	C8	None
	C9	None
	C10	None
	C11	None
	C12	None
	C13	None
	C14	None
	C15	None
	C16	None
	MH1	None
	MH2	None
	MH3	None
	MH4	None
	R5	None
	R6	None
	R7	None
	R8	None
	R9	None
	R10	None

Parts Available

Beta

Checks that all parts have a part number and are available from distributors.

System Checks

Auto-Layout

Beta

Reports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.

Passive Components

Resistor Power Rating

Beta

Checks that the power traveling across a given resistor is under its rating with 50% headroom.

Learn more

Pull Up/Pull Down Presence

Beta

Checks that IC pins that require pull up or pull down resistors have them.

Learn more

Capacitor Voltage Rating

Beta

Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.1k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Inspect

Una fuente de voltaje regulables de positivo a negativo y tierra de 50 volts

Controls

Properties

System Architecture

Role Details

Availability & Pricing

Distributor		Qty 1
	Arrow	$2.38–$16.31
	Digi-Key	$5.99–$23.27
	LCSC	$7.09–$7.77
	Mouser	$7.32–$22.09
	TME	$3.31
	Verical	$2.28–$4.88

Assets

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.