Searching: "ESP32-CAM"

Searching: "FS8205A"

Creating search plan for: "JST PH2"

Creating search plan for: "0.1uF Capacitor"

Creating search plan for: "10kΩ Resistor"

Creating search plan for: "220Ω Resistor"

Creating search plan for: "Push Button"

Creating search plan for: "Red LED"

Creating search plan for: "Green LED"

Creating search plan for: "MicroSD Card Socket"

Creating search plan for: "FTDI 6-pin Header"

Creating search plan for: "Mounting Hole 3.2mm"

Creating search plan for: "DW01"

Searching: "Looking for a PCB-mounted microSD card socket used in portable electronics. The requirement is for a basic microSD card holder that securely retains the card with standard pin configuration and footprint."

Searching: "Searching for a PCB mount microSD card holder designed for surface-mount integration. Key aspects include a secure fit, compatibility with microSD cards, and a design that meets standard card and board layout requirements."

Searching: "Seeking a surface mount microSD card socket with a latch feature for enhanced mechanical stability. This component should reliably secure the microSD card for applications in rugged or portable devices, maintaining proper electrical contact."

Searching: "Looking for a low profile PCB-mounted microSD card connector designed for slim form-factor applications. The part should offer a compact footprint while ensuring reliable mechanical retention and electrical performance."

Searching: "Search for a standard red LED designed for PCB-mounted applications typically used as an indicator light. Look for common specifications such as a forward voltage of approximately 1.8-2.2 V, a current rating near 20 mA, and available in widespread SMD package types. This query targets basic red LED parts across multiple vendors."

Searching: "Look for surface-mounted red LEDs optimized for PCB assembly and indicator applications. Specify that the LED should have a standard forward voltage (around 2V) and current (approximately 20 mA), similar brightness levels, and be available in popular SMD packages such as 0603, 0805, or 3528."

Searching: "Search for 0603 package surface-mount red LEDs intended for PCB indicator applications. Key technical details include a forward voltage in the range of 1.8-2.2 V, a forward current around 20 mA, and robust performance for consumer electronics. This search can yield parts from multiple manufacturers like Kingbright, Lite-On, or Cree."

Searching: "Look for 0805 package surface-mounted red LEDs for indicators on PCBs, specifying a forward voltage near 2 V and a typical current rating of 20 mA. The query should capture parts that are bright, suitable for panel or status indicators, and available from several suppliers."

Found 66 results.

Searching: "MicroSD Card Socket"

Found 80 results.

Searching: "Red LED"

Searching: "Looking for a standard green LED used for indication or display on PCB circuits. Typical characteristics include a forward voltage around 2.0V-3.3V and a current rating near 20mA. The LED should be suitable for applications ranging from consumer electronics to industrial panels."

Searching: "Searching for a surface-mount green LED for PCB-mounted applications. Key requirements include an SMD package (such as 1206 or 0805), a forward voltage in the range of 2.0V-3.3V, and a standard operating current of 20mA for indicator or lighting functions."

Searching: "Identifying a through-hole, 5mm green LED that is commonly used for panel indicators. The LED typically has a forward voltage of about 2.1V–3.3V and operates at around 20mA, making it suitable for prototyping and general-purpose uses."

Searching: "Focusing on green LEDs designed specifically as indicators with a 20mA operating current. The search targets components that meet standard indicator LED specifications including consistent brightness and energy efficiency for board level usage."

Searching: "A standard 10kΩ resistor used in general-purpose circuits for biasing, signal conditioning, or current limiting. Focus on common material types and traditional through-hole or surface-mount varieties, with unspecified tolerance and power ratings."

Searching: "A surface-mount 10kΩ resistor suitable for PCB applications. Intended for use in signal networks or biasing circuits, with a focus on compact, automated assembly options and standard SMD footprints such as 0805 or 0603."

Searching: "A precision 10kΩ resistor with 1% tolerance for applications requiring tighter resistance accuracy, such as precision voltage dividers or calibration circuits. Look for both through-hole and SMD options with proven reliability."

Searching: "A chip-style 10kΩ resistor designed for high-density PCB layouts. This component is suitable for modern digital and analog circuits requiring robust performance in compact SMD packages, with typical power ratings around 0.1W to 0.25W."

Searching: "Looking for JST PH series connectors with a 2.0mm pitch used in PCB-mounted wire-to-board applications. This query targets the family and pitch specification to locate the original part and baseline substitutes."

Searching: "Searching for JST PH connectors designed for PCB mounting in consumer electronics, emphasizing a 2.0mm pitch. The part functions as a wire-to-board connector, typically used for signal or low-current power interconnections."

Searching: "Seeking a JST PH series connector with a 2.0mm pitch suitable for PCB integration. The application involves secure wire-to-board connections for low-current, compact designs. Additional variations such as different pin counts (e.g., 2-pin, 3-pin, etc.) should be considered to ensure functional alternatives are available."

Searching: "A generic 220Ω resistor needed for typical PCB applications. The component should offer a nominal resistance of 220 ohms and be available in common resistor forms. This search should return a wide array of products including both surface-mount and through-hole types, with tolerances (e.g., 5% or 1%) and standard power ratings."

Searching: "A surface-mount 220Ω resistor in the 0603 package footprint. It is intended for compact PCB layouts where space is at a premium. Key parameters include a nominal resistance of 220 ohms, appropriate power rating (e.g., 1/10W or 1/8W), and available tolerances. This query will help locate parts matching the SMD specification."

Searching: "A through-hole version of a 220Ω resistor for PCBs where larger sizes or higher power ratings are required. The search should return products typically used in prototyping or where higher assembly robustness is needed. Look for standard wattage ratings (e.g., 1/4W) and common tolerance values."

Searching: "A specific search for a 220Ω resistor with a 1/4 watt power rating and 5% tolerance that is supplied on tape for automated pick-and-place assembly. This is intended for automated PCB production environments, highlighting the need for both electrical and mechanical specifications including tape packaging."

Found 71 results.

Searching: "Green LED"

Found 78 results.

Searching: "10kΩ Resistor"

Found 50 results.

Searching: "JST PH2"

Found 74 results.

Searching: "220Ω Resistor"

Searching: "Searching for a board-mounted 6-pin header as used on FTDI modules; expecting a header that matches the physical footprint of FTDI’s USB-to-serial interface boards. Likely a standard 0.1-inch pitch, possibly shrouded for robustness."

Searching: "Locating a 6-pin connector associated with FTDI devices. This is intended for applications involving USB-to-serial conversion where the header provides access for programming or debugging connections on PCB-mounted FTDI circuits."

Searching: "Searching for a PCB-mounted header matching FTDI’s 6-pin configuration. The connector should suit integration with FTDI-cabled adapters or breakout modules, with considerations for a 0.1-inch pitch and possibly a shrouded design for ease of use."

Searching: "Finding a breakout header typically used on FTDI cable assemblies. The part should expose six pins used for interfacing with FTDI USB-to-serial chips in a development or debugging setup, ensuring mechanical compatibility with the established FTDI footprint."

Searching: "Searching for a PCB design element that defines a mounting hole with a 3.2mm diameter. This query targets mechanical board features used for screw insertion or standoffs in PCB assembly, where the mounting hole must precisely match a 3.2mm requirement."

Searching: "Looking for a mechanical component or layout template that offers a 3.2mm screw or clearance hole in a PCB. This search is aimed at discovering products or design patterns that specify the mechanical dimensions used for mounting or securing the board."

Searching: "Seeking board mounting features that include an aperture or cutout with a 3.2mm specification. The focus is on part of a PCB design that is optimized for consistent screw fit or securing hardware during assembly."

Searching: "Identifying potential mounting hardware alternatives involving standoffs, inserts, or pre-designed mounting profiles that integrate a 3.2mm hole for mechanical stability. This search caters to solutions that facilitate secure board attachment using a 3.2mm mounting hole specification."

Found 60 results.

Searching: "FTDI 6-pin Header"

Searching: "Search for the DW01, a lithium-ion battery protection IC, used in battery management systems to provide overcharge, over-discharge, and short circuit protection in portable electronic devices."

Searching: "Identify the DW01 integrated circuit designed for lithium battery protection, highlighting its role in controlling battery safety functions such as overcharge, over-discharge, and short circuit detection in consumer electronics."

Searching: "Locate components that match the DW01 functionality: a battery protection IC for lithium-ion cells with established operating voltage ranges (e.g., 2.4V to 4.2V) and integrated protection circuits for reliable battery management in portable devices."

Searching: "Explore battery protection ICs with functionality equivalent to the DW01 for use in lithium-ion battery packs. Search for parts integrating similar safety features (overcharge, over-discharge, short circuit protection) and suitable for PCB-mounted battery management applications."

Found 60 results.

Searching: "Mounting Hole 3.2mm"

Searching: "Generic push button component; consider a PCB-mounted momentary tactile switch used for activating or deactivating circuits in user interfaces."

Searching: "Surface-mounted push button designed for PCB integration. Typically, a momentary tactile switch used in digital input applications with moderate actuation force and durability."

Searching: "Compact, surface-mount tactile push button optimized for PCB layouts in consumer electronics. Suitable for applications needing a low-profile, reliable user interface element with a high cycle rating."

Searching: "Low profile, PCB-mounted tactile push button intended for slim or portable devices. Emphasis on minimal actuation travel, fast response, and compatibility with surface-mount technology."

Found 67 results.

Searching: "DW01"

Found 73 results.

Searching: "Push Button"

Searching: "Searching for a generic 0.1uF capacitor typically used in decoupling and filtering applications on power rails. The component should be applicable for standard PCB-mounted uses, without initial restrictions on package type or voltage ratings."

Searching: "Looking for a 0.1uF ceramic capacitor intended for decoupling and bypass applications. The capacitor should be available in surface-mount technology (SMT) packages and suitable for use in circuits requiring stable performance over a range of temperatures."

Searching: "Identifying a 0.1uF multilayer ceramic capacitor (MLCC) with an X7R dielectric. This capacitor is typically used for high-frequency decoupling and noise suppression in power supply lines and digital circuits. It should support moderate voltage ratings (commonly 25V-50V) and be available in standard SMD sizes."

Searching: "Targeting a 0.1uF surface mount capacitor in a 0603 package with X7R dielectric properties. This part should be optimized for high-frequency decoupling in compact designs with low ESR and adequately rated for voltages around 25V-50V, common in consumer and industrial electronic applications."

Found 80 results.

Searching: "0.1uF Capacitor"

Creating search plan for: "JST PH2"

Searching: "Looking for JST PH2 series connectors, specifically the PH family from JST with a nominal 2.0mm pitch. This is typically a board-mounted connector used for low-current signal or power connections in consumer electronics."

Searching: "Searching for JST PH series board connectors characterized by a 2.0mm pitch. This query targets both the male and female housing components used in modern PCB-mounted assemblies for digital and control applications."

Searching: "Seeking JST PH series PCB-mounted connector solutions that feature 2.0mm pitch contacts. The part is intended for reliable cable connections in compact electronic designs, emphasizing secure mating and ease of assembly."

Searching: "Exploring JST PH series connector housings and mating parts specifically designed for 2.0mm pitch applications. This includes inquiries for both through-hole and surface mount variants, applicable in consumer device circuitry."

Searching: "Looking for various JST PH series connector configurations (e.g., single row, dual row) for PCB mounting with 2.0mm pitch. This search focuses on finding different terminal counts and layouts suitable for signal integrity and mechanical robustness in aerospace or industrial applications."

Found 79 results.

Searching: "JST PH2"

Completed 15 component searches.

Assessing knowledge needs.