Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project
Write a project description
Find schematic issues
Create a test plan

Ready.

Sign up to send
M1
U2
Part Type
Integrated Circuit
Designator Prefix
U
Manufacturer Name
Aerosemi
how do I connect U2 and M1?
dinesh6379

dinesh6379

@copilot how do I connect U2 and M1?
1y

copilot

To connect the MT3608 (U2) and the Texas Instruments power management IC (M1), here are the specific connections you need to make:
  1. Input Power Connection:
    • Connect the power output from the solar panel (SOLAR+) on M1 to the input pin (IN) on U2.
    • Connect M1:3 (SOLAR+) to U2:5 (IN).
  2. Ground Connections:
    • Connect the ground pin on M1 to the ground pin on U2.
    • Connect M1:2 (GND) to U2:2 (GND).
  3. Enable Pin:
    • If you want to control the enable status of the MT3608, you can connect it to an appropriate control pin, such as the VBAT_OK signal from M1.
    • Connect M1:4 (VBAT_OK) to U2:4 (EN).
These connections will allow the booster circuit (U2) to be powered by the solar input from M1 and provide a regulated boosted output voltage.
Would you like to make any other specific connections or is there anything else you need help with?
1y
how do I connect U2 and M1?
dinesh6379

dinesh6379

@copilot how do I connect U2 and M1?
1y

copilot

To connect the power manager IC M1 and the boost converter U2, follow these steps:
  1. Power Input from Battery Management IC M1:
    • Connect M1:BAT to U2:IN. This connection will supply power to the boost converter.
  2. Ground Connection:
    • Connect M1:GND to U2:GND. This ensures a common ground between the two components.
  3. Enable Pin:
    • You may want the boost converter to be enabled whenever the battery management IC indicates a valid battery. Connect M1:VBAT_OK to U2:EN.
Summary of Connections:
  • Connect M1:BAT to U2:IN.
  • Connect M1:GND to U2:GND.
  • Connect M1:VBAT_OK to U2:EN.
Would you like any more details on the connections?
1y
7
create a detailed step by step plan table for D1, CC1, BAT\_ADC, USB\_N, CS, C5,...
dinesh6379

dinesh6379

@copilot create a detailed step by step plan table for D1, CC1, BAT_ADC, USB_N, CS, C5, BUTTON_3, CC2, BOOT, C4, C3, USB_N, SW2, R3, R1, U3, SDA, BUTTON_4, 5V, U2, USB_P, SCL, C1, RST, R2, CC2, CS, DC, SDA, J1, SCL, DC, BOOT, EN_RST, 3V3, C7, BUTTON_1, U1, 3V3, USB_P, VBUS, RST, VBAT, EN_RST, 3V3, 3V3, USB_N, CC1, C2, C6, BUTTON_2, USB_P, SW1 to verify their functionality.
1y

copilot

Sure! Here’s a detailed step-by-step verification plan for the components listed:

Verification Plan

StepComponentActionExpected Outcome
1D1Connect 1 (K) to +5V and 2 (A) to GNDCheck if the diode is forward biased and current flows
2CC1Measure the voltage at pin 1Ensure it matches the reference voltage for CC1
3BAT_ADCMeasure voltageVoltage at P1 should correspond to VBATV_{BAT} level
4USB_NMeasure differential signalEnsure proper communication with USB
5CSMeasure signalEnsure communication with required interface
6C5Measure capacitance between P1 and P2Should read 0.1μ\muF
7BUTTON_3Press button and measure continuityButton press should show continuity
8CC2Measure voltage at pin 1Ensure it aligns with system design
9BOOTCheck boot pin statusShould initiate boot operations
10C4Measure capacitanceShould be 0.1μ\muF
11C3Measure capacitanceShould be 10μ\muF
12USB_NCheck data lines for activity during communicationConfirm USB data transfer
13SW2Press button and measure continuityShould show continuity when pressed
14R3Measure resistanceShould be 5.1kΩ\Omega
15R1Measure resistanceShould be 10kΩ\Omega
16U3Apply voltage at VINV_{IN} and measure VOUTV_{OUT}VOUTV_{OUT} should be +3.3V
17SDACheck signal integrityEnsure proper data transfer on I2C
18BUTTON_4Press button and measure continuityShould show continuity when pressed
195VMeasure voltageShould show +5V
20U2Initialize and run a simple programConfirm operation of STM32WB5 microcontroller
21USB_PMeasure differential signalEnsure proper communication with USB
22SCLCheck signal integrityEnsure proper clock signal on I2C
23C1Measure capacitanceShould be 10μ\muF
24RSTMeasure signal when reset is triggeredConfirm system reset occurs
25R2Measure resistanceShould be 5.1kΩ\Omega
26CC2Measure voltage at pin 1Ensure it aligns with USB-C configuration
27CSMeasure signalConfirm proper operation in the interface
28DCMeasure signalEnsure proper data communication
29SDACheck signal integrityValidate data line operation on I2C
30J1Test connectionEnsure all pins are properly connected
31SCLCheck signal integrityValidate clock line operation on I2C
32DCMeasure signalConfirm proper operation
33BOOTCheck boot pin statusConfirm boot operations initiate correctly
34EN_RSTMeasure signalConfirm enable/reset functionality
353V3Measure voltageShould be +3.3V
36C7Measure capacitanceShould be 1μ\muF
37BUTTON_1Press button and measure continuityShould show continuity when pressed
38U1Test displayEnsure LCD driver functions properly
393V3Measure voltageShould be +3.3V
40USB_PMeasure differential signalConfirm proper USB communication
41VBUSMeasure voltageShould be +5V
42RSTApply resetConfirm system reset
43VBATMeasure voltageShould be battery voltage level
44EN_RSTApply enable/reset signalConfirm function
453V3Measure voltageShould be +3.3V
463V3Measure voltageShould be +3.3V
47USB_NEnsure proper connection for USB dataVerify USB connection
48CC1Measure voltageEnsure it meets required levels
49C2Measure capacitanceShould be 0.1μ\muF
50C6Measure capacitanceShould be 1μ\muF
51BUTTON_2Press button and measure continuityShould show continuity when pressed
52USB_PEnsure proper connection for USB dataVerify USB connection
53SW1Press button and measure continuityShould show continuity when pressed
Each step can be carried out using standard equipment like a multimeter, an oscilloscope, and a function generator when needed. Let me know if you need details on any specific step or equipment required!
1y
3
create a high level mermaid block diagram of D1, CC1, BAT\_ADC, USB\_N, CS, C5, ...
dinesh6379

dinesh6379

@copilot create a high level mermaid block diagram of D1, CC1, BAT_ADC, USB_N, CS, C5, BUTTON_3, CC2, BOOT, C4, C3, USB_N, SW2, R3, R1, U3, SDA, BUTTON_4, 5V, U2, USB_P, SCL, C1, RST, R2, CC2, CS, DC, SDA, J1, SCL, DC, BOOT, EN_RST, 3V3, C7, BUTTON_1, U1, 3V3, USB_P, VBUS, RST, VBAT, EN_RST, 3V3, 3V3, USB_N, CC1, C2, C6, BUTTON_2, USB_P, SW1. Include key component's manufacturer part number in each block whenever possible.
1y

copilot

Sure, here is a high-level Mermaid block diagram capturing the essential components and their connections:

Image

MCU and Peripheral
Diodes and LEDs
Capacitors and Resistors
Buttons
Control and Communication
USB Interface
Power System
Provides Power
Provides Power
Battery
Battery
Provides Power
Provides Power
Provides Power
LED Indicator
Net: DC
Net: RST
Net: BAT_ADC
D1MPN: node_1N5819HW-7-F
U4MPN: XC6802A42XMR-G
LED1
C1Cap: node_10uF
C2Cap: 0.1uF
C3Cap: node_10uF
C4Cap: 0.1uF
C5Cap: 0.1uF
C6Cap: node_1uF
C7Cap: node_1uF
C8Cap: node_1uF
C9
R1Res: node_10k
Net: CC2
R2Res: 5.1k
Net: CC1
R3Res: 5.1k
Net: BUTTON_1
SW1MPN: PTS815 SJM 250 SMTR LFS
Net: BUTTON_2
SW2MPN: PTS815 SJM 250 SMTR LFS
Net: BUTTON_3
SW3
Net: BUTTON_4
SW4
Net: BOOT
SW5
Net: EN_RST
SW6
Net: SDA
Net: SCL
Net: CS
Net: USB_P
J1MPN: TYPE-C-31-M-12
Net: USB_N
U2MPN: STM32WB5MMGH6TR
PowerNet: VBUS
U3MPN: AMS1117-3.3
PowerNet: VBAT
PowerNet: node_5V
PowerNet: node_3V3
U1MPN: GC9A01A
Additional Nets
The diagram captures high-level connections between key components and includes the manufacturer's part number wherever available. This should give you a clear view of the relationships between the main components in your climate control system design.
1y
1
how do I connect U2 and M1?
dinesh6379

dinesh6379

@copilot how do I connect U2 and M1?
1y

copilot

To connect the MT3608 (U2) boost converter to the power manager IC (M1), you need to follow these steps:
Connections
  1. Power Input from Battery and Solar Panel:
    • Connect M1:BAT to the positive terminal of the battery.
    • Connect M1:GND to the negative terminal of the battery.
    • Connect M1:SOLAR to the positive terminal of the solar panel.
  2. Connecting the Boost Converter Input:
  3. Enable Pin:
    • Connect M1:VBAT_OK to U2:EN (if you want the boost converter to be enabled when the battery voltage is okay).
Summary of Connections
Would you like any additional components or connections for this setup?
1y
5
list all D1 pins in a table format. For each pin provide its pin number, pin nam...
dinesh6379

dinesh6379

@copilot list all D1 pins in a table format. For each pin provide its pin number, pin name and function.
1y

copilot

Sure! Here's the table listing all the pins for D1 along with their pin numbers, names, and functions:

Table

Pin NumberPin NameFunction
1KCathode - Negative terminal of the diode
2AAnode - Positive terminal of the diode
Let me know if you need any further details!
1y
2
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
    jharwinbarrozo
    15.1k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
    jharwinbarrozo
    1.1M

Inspect

Climate Control System Reference Design uj73

Climate Control System Reference Design uj73
Description

Created
Last updated by dinesh6379
1 Contributor(s)
dinesh6379

Controls

Properties

Availability & Pricing

DistributorQty 1
Digi-Key$1.25–$2.91
LCSC$0.45–$0.54
Mouser$2.05
Verical$0.08

Assets