Clarification Request

collinsemasi

collinsemasi

what
302 days

flux

0:26

Project
Could you clarify what you’d like help with?
302 days
shadow09

shadow09

Could you explain Q3 Ckt
292 days

flux

0:37

Chat History
Project
Schematic
Q3

Analyzing circuit design.

Using Knowledge Base Tool.

Using Schematic Tool.

Defining Q3's function.

Here’s how the Q3 circuit works:
  • Q3 is an N-channel MOSFET (SSM3K15ACTC,L3F)
    • Pin 1 Gate (G) on net “DescriptiveNet48” via series resistors R13/R14
    • Pin 2 Source (S) tied to GND
    • Pin 3 Drain (D) on “Net 50”
  • Net 50 fans out to R15, R16, R17, which are the current-limit resistors for the red, green, and blue LEDs of LED1.
  • With gate driven high by the MCU (through R13/R14), Q3 conducts, sinking LED currents to ground and turning LEDs on. When the gate is low or floating, Q3 is off, isolating the LEDs.
  • A pull-down (R13/R14) on the gate follows best practice: ensure Q3’s gate never floats, so the MOSFET reliably stays off when the MCU pin is tri-stated.
Show me Q3 context
Explain Net 50 load
Check MOSFET suitability
Gate resistor/pulldown values
11 days

Ready.

Sign up to send
New Comment
Hey copilot review this block diagram and compare it with the product requiremen...
26
@copilot using mermaid syntax, create at lease 5 block diagrams that explore var...
17
create a mermaid formatted block diagram for this project
28
can i connect the microphones to the pcm1864?
16
what is the use of pin 15, 17 and 16
11
using python and matplotlib show the graph of the bandpass filter clearly labell...
18
Here's the block diagram of this design. In a table format, recommend at least 3...
22
New Comment
23
how do I use Flux?
30
brainstorm a few architecture options for this project
29
https://www.st.com/en/microcontrollers-microprocessors/stm32f429zi.html#document...
12
Recommend 5 suitable host processors and compare them in a table format. The rec...
25
Recommend 5 suitable host processors and compare them in a table format. The rec...
24
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
    jharwinbarrozo
    15.4k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
    jharwinbarrozo
    1.1M
The Biskuit pendant is a WiFi/BLE Enabled wearable AI Diary which captures Images and sounds periodically and creates an audio visual timeline of your day so that you don't forget anything.

Properties

hours

Pricing & Availability

Distributor

Qty 1

Arrow

$3.87–$4.89

Digi-Key

$10.80–$11.46

LCSC

$9.81–$19.34

Mouser

$19.02

Verical

$0.88–$5.96

Assets

cookie-svgrepo-com.svg

cookie-svgrepo-com.svg

cookie-svgrepo-comThumbnail
biscuit-svgrepo-com.svg

biscuit-svgrepo-com.svg

V4
Biskuit AI.svg

Biskuit AI.svg

Biskuit AI
V5.svg

V5.svg

V5
Asset 2.svg

Asset 2.svg

V2
Open-source-hardware-logo.svg

Open-source-hardware-logo.svg

Open-source-hardware-logo
Outline 6.svg

Outline 6.svg

Outline 6

Controls